V-Ball Valves

Material: body: (1)wcb (2)cf8 (3)cf8m (4)cf3m Ball: (1)cf8 (2)cf8m (3)cf3m Auxiliary equipment¡êo(1) valve positioner (2) solenoid valve¡¡éposition monitoring switch Size:dn25, pn10, 18kgs

V Notch Ball Valves Our V-Ball, V-Port and v notch ball valves are made of high-quality materials. v notch ball valve, the "V" notch is a unique design that allows for precise flow and the ability to regulate and control flow through a 30�°, 60�° or 90�° V "notch". The v notch ball control valve is a low-maintenance valve with a tight bubble shut-off function. All v notch ball valves are highly manageable and can operate at high temperatures (up to 1000�°F) and pressures up to 500PSI (liquid) and 150PSI steam. V notch ball valves are cost-effective compared to valves with similar pressure drops and low flow control (down to 0.07) Cv. The v notch ball control valve is cost effective compared to valves with similar pressure drop and low flow control (down to 0.07). Our v notch ball valves can be manually configured or actuated for automated handling and control. These valves are available in ANSI flange, NTP (threaded) and socket weld. V Notch Ball Valves introduction: VN6 series V-notch ball valve, is concentric segmental ball valve for modulating applications. Its V-notch segmented ball permits wide range ability and produces an equal percentage flow characteristic. As the V-notch ball rotates into the seat ring, it creates a wedging and shearing effect to prevent dragging or slurries between the seat and the ball.Our v-notch ball valves normal size is 1" to 12". V Notch Ball Valves Advantage: The v-notch ball valves are used settled and also clamped driven shaft plus sphere shaft with splined connection made for absolutely no shed motion for very accurate placing and specific control.

Name: v-type ball valve Model: zshv-16p Nominal diameter: dn20-dn400 Nominal pressure: 1.0mpa-6.4mpa Material of body: wcb, 304, 316, 316l etc. Material of ball: wcb, 304, 316, 316l etc. Type of operation: gearwheel, pneumatic actuator, electric actuator Accessories: positioner, solenoid valve , limit switch, series filter regulator . Made of standard: gb, ansi, jis, iso, din, bs etc. Single package with wooden box

Name: v-type ball valve Model: zshv-16p Nominal diameter: dn20-dn400 Nominal pressure: 1.0mpa-6.4mpa Material of body: wcb, 304, 316, 316l etc. Material of ball: wcb, 304, 316, 316l etc. Type of operation: gearwheel, pneumatic actuator, electric actuator Accessories: positioner, solenoid valve , limit switch, series filter regulator . Made of standard: gb, ansi, jis, iso, din, bs etc.

Segment type ball valve is the best replacement for Globe valve & Other Costliest control valves. In V-Notch valve the flow will be through pipeline without hindrance. The V in the ball design will provide linear application & have good Cv value (Flow). The advantage is you can have a tremendous power saving compared to other control valves having turbulence. This valve is available from 2 8 in wafer type as well as flanged end.

Pneumatic V Port Titanium ball valve Titanium ball valve Ball valve Manual Valve titanium valve, Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief          Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.