Specification
Ambient Environment
Operating Temperature: -10ípC to 50ípC
Temperature compensation: -10ípC to 50ípC
Storage Temperature: -20ípC to 70ípC
Relative humidity: < 95%
Atmospheric pressure: 0.86~1.06 bar
Re-calibration period: One year (recommend)
Media Compatibility
-1~ 2.5 bar: Clean dry non-corrosive gases.
4~ 2500 bar: media compatible with 316L SS.
Over pressure warning: 120%
Pressure units:
Pa, KPa, KGF/cm2, inH2O, mmH2O, PSI, mbar, bar, MPa (In order to avoid the readings to overflow or too low to read, only some of pressure units are selected)
Accuracy:
0.02%F.S accuracy over ranges to 600 bar; 0.1%F.S accuracy over ranges to 2500 bar, permits use in most environments without degradation of accuracy.
Dimension:
Calibrator head only: ª+120mmí-46mm,
Total height: 184mm
Weight:
Net weight: 0.7kg (differential type: 0.8kg)
Gross weight: 1kg
Supplier: Pressure gauge, pressure transmitter, pressure calibrator, flow meter, temperature transmitter
Buyer: Sockets
Supplier: Precision pressure instruments, digital pressure gauges, digital pressure calibrator, automatic pressure controllers, multifunction calibrator and temperature calibration solution
Services: OEM
Supplier: Dry block temperature calibrator , process calibrator pressure calibrator ,handdle lcr meter ,electrnic load ,multimeter ,desktop lcr meter
Supplier: Temperature measuring instruments, thermocouples, thermowells, rtds, calibration equipment, temperature sensors, industrial heaters, furnaces, pressure & temperature gauges.
Supplier: Metering Pump Accessories, Back Pressure Valves, Safety Relief Valves, Pulsation Dampeners, Flow Calibration Columns,y Strainer
Supplier: Pressure gauge, temperature gauge, rtd sensor, thermocouple, calibration pump, calibration bath, valve, scientific instruments
Parameters: - simulation and measurement: thermocouple signals J, K, T, R, S, B, U, L, E, N, with auto-compensation of terminal temperature, signals in thermocouple and thermostat system, resistance thermometer signals: Pt 100, Pt 500, Pt 1000, Ni 100, Cu 100, resistance signals from 10 up to 5 , voltages and currents in range: -11 V...+11 V and 22 mA...+ 22 mA - accuracy 0.025% - STEP and RAMP function, - led out 24 V terminals, - RS 232C interface, - available in the option for pressure calibration. The INMEL 60 calibrator is destined to check and control systems, industrial automatic control engineering devices such controllers, recorders, meters, etc. This instrument has the possibility to generate and measure signals from ten thermocouples, five thermometer resistances, four voltage ranges, two current ranges, two resistance ranges. Thermoelectric terminals have an internal temperature measurement and for this reason make possible the generation or measurement of thermoelectric signals with the compensation for the given thermocouple. In this working mode, a real thermocouple is added to thermoelectric measuring terminals, and compensation conductors to thermoelectric generating terminals. The calibrator ensures the simultaneous generation of the signal on output terminals and the measurement of the signal on measuring terminals, thanks to this feature the calibrator is suitable to check transducers. The INMEL 60 calibrator enables to check two-wire transducers. the used graphical display contains a lot of information on a screen with a good readability. The display ground-lighting, which can be switched off, is especially useful in conditions of an insufficient lighting. The internal supply from the battery enables the work not only in laboratory conditions but also on the object. The calibrator can also be used to the maintenance and servicing of industrial measuring instruments, systems and electronic equipment. Application: Checking and calibration: - measuring transducers controlled by a voltage or current signal, a thermoelement or resistance thermometer, - two-wire transducers, - temperature meters, - pressure transducers, - manometers, - measuring and control lines.
5 PSI-D-4V-MIL Amplified Middle Pressure Sensor General Description The Amplified line of middle pressure sensors is based upon a proprietary package technology to reduce errors. This model provides a ratiometric 4-volt output with superior output characteristics. The sensor housing has been designed specifically to reduce package induced parasitic stress and strain. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure. These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. Each sensor is internally compensated using an ASIC compensation technique. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The output of the device is ratiometric to the supply voltage over a supply voltage range of 4.5 to 5.5 volts. 5 PSI-D-4V-MIL Amplified Middle Pressure Sensor Features * ±5 psi Pressure Ranges * Ratiometric 4V Output * Temperature Compensated (-40 degree C to 125 degree C) * Calibrated Zero and Span 5 PSI-D-4V-MIL Amplified Middle Pressure Sensor Applications * Medical Instrumentation * Environmental Controls * HVAC
Supplier: Humidity and temperature sensor, transmitter, alarm monitor, flame detector, portable calibrator, hydraulic and pneumatic pressure meter, vibration meter
Buyer: Hose pipe, water membrane, pump