Drill Rig

Down The Hole (DTH) drill rig capable of drilling to a depth of 300mtrs (1000 ft) under favorable drilling condition. The drill rig can be operated on rocky formation and hard to medium soil formation. The drill rig can make a hole of diameter 4 to 6.

The drilling rigs can fully meet the well-drilling- process requirements by adoption of flexible driving designs- mechanical drives (high-speed diesels, hydraulic transmission box, angle gear box or middle-speed diesel hydraulic transmission, chain combination box), compound transmission and electrical drives (VFD or SCR) etc. * The whole unit is very compact and a quick whole transportation and installation of the whole drilling rig can be realized due to a utilization of a skid-mounted structure. In addition, the drilling rig requires a small working site due to its high integration and compact configuration. * Masts and substructures have various structures, such as: perpendicular-hoist sectional mast, whole-hoist K-type mast, telescopic substructure, spirally hoisted substructure and folding - frame substructure. * A standard and module design and various ways of combination have been adopted in order to boost up the universal and exchangeable performances of the drilling rigs and to meet the user different requirements. * Disc brake or band brake can be applied as main brake and air brake or FDWS brake can be used as auxiliary brake and the energy-consumption braking can be available for electrical-drive-rig auxiliary brake. The drawworks can be equipped with bit-feed motor and control system. * The Internet and communication techniques have been used on the drilling rigs, which can realize an integral display for power, air control, hydraulic control, and monitoring and the intellectual and safe control of the driller. * The perfect configurations of the solid control system, well control system, high-pressure pipe manifold system, the generator house, the engine pump house, doghouse and other auxiliary facilities can meet the user different requirements. Safety and inspection measures are strengthened under the guidance of the design concept of ° Humanism Above All¡± to meet the requirements of HSE.

1.High drill head lifting force; 2.Suit to various drill tools; 3.High hoist lifting force; 4.High drill efficiency; 5.Adaptable to various strata; 6.Rinse medium can use both mud and air. As per customers' requiremnt

ESSOS Series is Mud Drilling,DTH Water well Geo thermal drilling Micropiles Soil investigationsGround consolidations. Engine Unit [ Cummins QSB4.5 Tier III] - Aspiration : Turbocharged and Charge Air Cooled - Fuel System : Bosch Electronic - Emission Certifi cation : U.S.EPA Tier3,EU StageIII - Horsepower : 130 BHP [97kW] @ 2,200 RPM - Peak Torque : 459 lb-ft [622Nm] @ 1,500 RPM Mast - Box frame using high strength steel (Tensile 760MPa, Yield 700MPa) - Welding condition AWS D1-1 - V-Profi le power head sliding mechanism - Dual leaf chain with safety wire rope or telescopic cylinder type - Double Clamp(HI-ROKTM) equipped on Mast for angle drilling job - Equipped with 3,000lb winch - Power head stroke 12~14 feet - Power head side shift to give 8� clearance - Mast sliding stroke : 30� - Pull back : 28,000 lb ~ 40,000lb - Pull down : 17,000 lb ~ 28,000lb PowerHead - Two Speed Power Head - Strong and compact helical gears - Separate Water Swivel easy maintenance - Separate Float Cushion Sub - Max Torque : 3,523lbf-ft~5,576lbf-ft - Motor Speed : 20~122rpm - Eaton VIS series Two Speed Motor.

The draw works is driven by two VFD AC motors with 1+1r/2+2r step-less speed, and reversal will be realized by ac motor reversal. The mud pump is driven by VFD AC motors, which are mounted on the rear skid of mud pump, with v-belt transmission and simple structure. The independent driven rotary table runs with 1+1r/2+2r step-less speed, and reversal will be realized by ac motor reversal. Using AC-DC-AC drive technology, rotary table and draw works are four quadrant running and full digital vector control. Single drum, gear driven and one / two shifts smooth speed change draw works is simple in structure and reliable in operation. Feed back / dynamic brake is adopted to replace eddy current brake as auxiliary brake. Automatic drilling is obtained by draw works main motor or an independent motor. Intellectual position control for traveling block prevents crown block and rotary table from collision. Real time communication and network is available by using profibus technology. K type mast is suitable for install top drive system. Sling shot or swing up substructure and mast are applied so that all the equipment can be installed at lower position. Suit for any transportation.

Model : C650D-EXP blasthole drill Specifications: Rated capacity : Nominal hole size 7-7/8(200 mm ) by Rotary method, Upto a depth of 148 (45.12 m) using 30 long 6.25 OD drill pipes. Standard mounting : Tengl, India make Under Carriage model T23/D4 , 24 Triple grouser track 10 6 long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. Pulldown and hoist :Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33 head travel for handling 30 long drill pipe. Pulldown capacity: 35,000 LBS. Hoisting capacity: 20,000 LBS. Standard feed rate: 14 FPM Standard hoist rate: 25 FPM Fast feed rate: 70 FPM Fast hoist rate : 124 FPM MAST : Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38 for 30 long drill pipe. ROTARY HEAD : Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR: Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER: Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING: Hydraulically operated Four pod loader suitable for handling 6.25 OD x 30 long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48 stroke; two rear 125 MM bore, 36 stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank.

Two (2) sets of diesel engines and allison transmissions. Mature double engine compound box and drive system. 118/125ft(36/38m) mast with stiffened rectangular pipes. 14íß8 reinforced chassis with good cross-country capacity. 5.5/6m foldable substructure and dog house. Top drive system is available. Main parameters Drilling depth(4-1/2"dp) ft(m): 9840(3000) Workover depth(3-1/2"dp) ft(m): 21325(6500) Max.Hook load lb(kn): 381260(1700) Drill line dia., in.(mm)/lines: ª)1-1/8(ª)29)/8 Max.Hook speed ft/s(m/s): 4.46(1.36) Overall dimensions in shipping status ft(m) 69.7íß10.8íß14.67(21.25íß3.3íß4.47) Weight lb(kg) 167548(76000) According to customer's request

1.Zj40/2250db ac drilling rig is suitable for the exploration of petroleum and gas wells with a depth of 2000-3200m by 127mm drilling rod, or a depth of 2500-4000m by 114mm drilling rod. 2.Ac-dc-ac drive system. 3. Single shaft drawwork, drum notch. Hydraulic disc type brake is adopted as the main, while energy-losing brake or etn brake is adopted as the auxiliary. 4.The rotary table adopts independent drive. 5.Parallelogram seat realizes the low-level installation of table-board equipments and derrick, then rises them up by right of drawwork. 6.The main mechanical components of drilling rig follow the standard of api with marks According to customer's request

Drilling rig We are a leading supplier of petroleum equipment in china, our dilling rig, with api certificate, include truck-mounted drilling rig and skid-mounted drilling rig. 1.Drilling depth: 1000m to 7000m 2.Driving mode: mechanical drive, electromechanical combination drive, variable frequency electric drive, dc electric drive 3.Model: zj20.Zj30.Zj40, zj50, zj70 With branch companies and offices set up in beijing, ecuador, saudi arabia, nigeria and kazakhstan to explore the trading and service market. Meanwhile, petroleum equipment warehouses were built in usa, saudi arabia and ecuador to support them. In contains, or bulk shipment, packed for long-term shipment