Magnesium is the lightest of all structural metals, aluminum is 1.5 times heavier and steel is 4 times heavier. Wrought magnesium tooling plate (alloy az31b) has the following benefits and characteristics:
òabsorbs vibration for a longer life, while retaining dimensional stability.
ò4 to 5 times greater tool life.
òup to 5 times more machinable than rolled aluminum.
òstrong weldments up to 95% of parent metal, with minimal porosity.
òexcellent strength and stiffness per unit weight.
òideal for a broad range of operating temperatures, from 350 degrees fahrenheit to -30 degrees fahrenheit.
ògood for electrical and computer applications.
Pallet demension:114cm(l)x57.5cm(w)x111cm(h)
AM50A / AM60B / AZ91
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
*AZ91E *ALMG %50-50 *AZ91D *AM50 *AZ63 *AM60
Magnesium ingot Spec:mg 99.9%min Fe 0.01%max Ni 0.001%max Cl 0.003%max Si 0.02%max Mn 0.019%max Cu 0.001%max Al 0.01%max Size:7.5kg/-0.5kg packing on mg pallet.
Magnesium ingot: We can supply various kinds of magnesium related products .Such as magnesium ingot, magnesium alloy, magnesium granular(powder), etc. Magnesium ingot as below:(note:customers special request available!) Magnesium ingot Mg:99.9%min. Al: 0.02%max. Si 0.02%max. Mn 0.02%max. Magnesium ingot size: 7.5kg+/- 0.5kg High purity magnesium: Mg:99.95%min. Al: 0.0040%max. Fe 0.0045%max. Si 0.0070%max. Ni 0.0010%max. Mn 0.0070%max. Cu 0.0030%max. Magnesium ingot size: 7.5kg+/- 0.5kg Mg:99.99%min. Al: 0.0020%max. Fe 0.0045%max. Si 0.0020%max. Ni 0.0010%max. Mn 0.0020%max. Cu 0.0020%max. Magnesium ingot size: 7.5kg+/- 0.5kg Magnesium alloys such as : Az91d, az91hp , az63 , za10, am60, am50, am20, ze41a and so on with the standard of gb/t5153-2003, gb/t19073-2003 and astmb94-92. Magnesium ingot size: 7.5kg+/- 0.5kg Packed on pallets with plastic covering and steel tape to tighten
Supplier: Magnesium alloy ingots
Supplier: Magnesium alloy ingot
Buyer: Magnesium alloy scrap
Supplier: Magnesium alloy , magnesium ingot
Buyer: Magnesium scrap
Supplier: Zinc ingot, aluminum ingot, magnesium alloy, tin ingot, magnesium oxide, copper alloy, aluminum alloy, non-ferrous metals
Services: Exporting
