We have sulphur granulated from seller's mandate.1, 000, 000 mt per year. Please contact us for further conversations in kkmtradepartners community.
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
Seller guarantees to the Buyer that the Goods delivered under the present Contract shall correspond to the characteristics shown below: ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) IRSI 200-206Steel scrap Defined as HMS 1 & 2 in an 80/20 mix under IRSI c odes 200 through 206. No n- metal impurities total 1 % (one percent) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, Sealed gas carbon steel is not included in this scrap -we sell that as a separate item.
We are one of the best supliers of scrap mettallic products here in cameroon we are also supply our products at moderate prices to interteed buyers so intereted buyers should contact us via for more info on our products below are some of our products been supplied by us Billets,Aluminum Billets,Other Billets,Steel Billets,Ingots,Aluminum Ingots,Antimony Ingots,Bismuth Ingots,opper Ingots,antimonial lead ingots,Lead Ingots ,Magnesium Ingots,Manganese Ingots,Silicon Ingots,Steel Ingots,Tin Ingots,Titanium Ingots ,Zinc Ingots,Pig Iron,aluminium scrap,copper scrap etc
Specifications :- used rails - R50/R65 Carbon (C): 0.54 0.082% Manganese (Mn) 0.75 - 1.05%, Silicon (Si): 0.18 0.40%, Phosphorous (P): Max. 0.035%, Sulphur (S): Max. 0.045%, Arsenic (Ar): Max. 0.15% Width: 0.5 m Iron Balance: Norms R50 Gost 7173-73 and R65 Gost-8165-75 R50(51.67KG/M)-Gost- 7173-75 R65(64.72KG/M)- Gost- 8165-75
Used Rail Available Supplier Worldwide
Used Rails R50 - R65 Available. Origin : Saudi Arabia. Performance Bond : 2% Payment Terms : LC AT SIGHT Destination : ASWP CIF Monthly capacity : Any quantity. MQO : 100,000 Mt x 12 Months. Price : 100,000*12 = $240 Nett 200,000*12=$235 Nett 300,000*12=$230 Nett 400,000*12=$225 Nett 500,000*12=$220 Nett
Used Rails R50 - R65 Available. Origin : Saudi Arabia. Performance Bond : 2% Payment Terms : DLC - MT 700 payable at buyer's destination port. Destination : ASWP CIF Monthly Capacity : 5,00,000 Mt MQO : 100,000 Mt x 12 Months. Price : 100,000*12 = $225 Nett 200,000*12=$220 Nett 300,000*12=$220Nett 400,000*12=$215 Nett 500,000*12=$210 Nett *Negoiatable No overpricing We can arrange other Origins also such as Poland, South Africa, Kenya, Philippines, Thailand, etc. For all origins, Docs required LOI with bank details or ICPO BCL or Draft LC or Verbiage or equivalent docs to check clients financial ability. Pymt terms : LC/ DLC/ SBLC payable at buyer's destination port.
I have 5 million tons of used iron rails ready to ship out The amount can be as high as 10 million tons Minimum amount can start with 500,000 tons but not less than that The price can be negotiated The terms of payment must be LC letter for the whole amount, or an MT705 letter first and conditions of the LC can be negotiated Please note that in order to save your time and to avoid scams , please do not contact me with demands other than the LC letter , any other methods of payment will be ignored