Universal catalytic converter:
All products have satisfied EPA emission standard and Euro 2, 3 and 4
Material: stainless steel
Rated volume: 3.8L/4.250lbs
TWCat001
Inlet/outlet: 1.75, 2, 2.25, 2.5, 2.75 and 3-inch
Lower burning temperature:
CO: not below 241centidegree
HC: not below 246 centidegree
NO2: not below 264 centidegree
Higher conversion efficiency:
CO: is more than 96%
HC: is more than 95%
NO2: is more than 90%
Good function of anti-poisoned and aging
Small motive loss: less than 3%
Decline sound: 2 to 3dBA
Long service life, after 43 minutes super voice wave clean, catalyst sheds off is not more than 2
Structure is simple
Service lifespan: 80,000 km
High dispersion of precious metal
Low light-off temperature
Excellent oxygen storage ability wide span
Good performance against high temperature
Reduces emission of CO, HC and NOx by up to 98%
Can be provided in a standard or custom configuration
Advanced washcoat technology: rare-earth base noble metal catalyst.
length/width/height:15"*5.2"*3.7".
Universal catalytic converter: standard and EPA,CARB II,Euro 2, 3 and 4 Material: stainless steel Rated volume: 3.8L/4.250lbs TWCat027 Inlet/outlet: 1.75, 2, 2.25, 2.5, 2.75 and 3-inch Lower burning temperature: CO: not below 241centidegree HC: not below 246 centidegree NO2: not below 264 centidegree Higher conversion efficiency: CO: is more than 96% HC: is more than 95% NO2: is more than 90% Good function of anti-poisoned and aging Small motive loss: less than 3% Decline sound: 2 to 3dBA Long service life, after 43 minutes super voice wave clean, catalyst sheds off is not more than 2 Structure is simple Service lifespan: 80,000 km High dispersion of precious metal Low light-off temperature Excellent oxygen storage ability wide span Good performance against high temperature Reduces emission of CO, HC and NOx by up to 98% Can be provided in a standard or custom configuration Applied engineers: 376, 378, 462, 465, 479, 491, 495 saloon car, SUV, SRV, pick up trucks, light trucks and light passenger cars . Wide range of gasoline catalytic converters 5 years warranty on converter body Sell material: 409 and 304 stainless steel Inside the catalytic converter, this is a metal or ceramic honeycombed substrate, on the surface of the substrate coated with the precious metals such as platinum, palladium and rhodium With heat shield that protects the lower parts of the vehicle form high temperatures reached.
Supplier: Used machinery and equipment's voltage stabilizer, ac and dc power supply, pick and place machines , transformers ,power line controller (plc), vacuum pumps, power amplifier, vacuum oven and nitrogen oven, autoveyor, shield room, audio analyzer, spectrum analyzer, rc oscilloscope, av multi tester, modulation analyzer, signal generator, digital multi meter, stereo modulator, pal scam pattern generator, w/i audio tester, rds encoder, true rms multimeter, hdmi source tester, digital signal generator, wow filter calibration.
Supplier: Electrical Diesel Hfo And Gas Generator, Led Lights, Filters Air And Fuel, Transformer, Control Panels, Switchgear Panels Lv And Mv, Electronic Compnonent, Spares For Generators And Cement Plant
Supplier: Auto catalytic converter, three-way catalytic converter, muffler, high flow catalytic converter, industrial waste air purifier, diesel catalytic converter, catalyst
Services: Car catalytic converter modifying
Car air purifier removes dust, smoke, harmful gas and odor as it filters the air with 6-stage filter, including Anti-pollen filter, Antibiosis nano silver ions filter, HEPA filter, UV lamp, PCO (Photo catalytic Oxidation) & ionizer system. Breathe better, Live healthier! -6 - in -1 air purifying: Anti-pollen filter, Antibiosis nano silver ions filter HEPA filter, UV lamp, PCO filter - Photo catalytic Oxidation, Negive Ion Generator. -Filters out microscopic pollen particles, destroys bacteria, germs, biological pullution and other impurities, to ensure that your family breathes better; -Equipped with variable output control for optimum use of power; -Variable mounting: Can be used in your car, as a table top or wall mounted model according to your convenience; -Dimension: F70x150mm.
About Rotary Furnace The Rotary Melting Furnace is a very flexible and universal equipment used for recycling many non-ferrous metals. It is the major lead production technology used in India and many other countries for Secondary Lead Production. A lead production system based on this technology has certain distinct characteristics such as: Equipment scalable for installing higher capacities Recovers all lead in one production cycle Plates & powder from scrap battery as well as slag from Mini Blast Furnace can be used as raw material Requires addition of certain consumables Can be fired with various fuels Generates high Pollution both as Flue Gases & Fugitive Emissions Description of Rotary Furnace It is a Rotary kiln in the form of a metallic cylinder with conical sides on both ends. Mild steel plate is used for construction of this shell and its thickness varies depending upon the capacity of the equipment. This shell is rotated on its own axis at 1-2 rpm. For this purposes tyres (also called riding rings) are fitted on the shell. These are fabricated from MS squares or flats, machined for a smooth finish. These tyres ride on steel rollers which are again machined finely. These rollers are fitted on a robust MS structural frame and driven by a gear & motor arrangement. The shell is lined inside with insulation and fire bricks of suitable Alumina content. Conical ends of the furnace are open on both sides. The furnace is charged with Raw material along with additives from the front end. This side is provided with a movable door on which a burner is mounted. The burner can be a conventional one or a fully automatic one depending upon the fuel used. At the other end, an exhaust block lined with refractory bricks is provided. A tapping hole is provided in the center of the shell from where molten metal & slag are discharged. Flue gases generated are sucked from the exhaust block side of the furnace. A typical 3.0 TpB Rotary Furnace has the following standard sizes & specifications : Outside dimensions of the Rotary Shell dia : 2075mm Shell length : 2500mm Total length : 4500mm Charging dia : 450mm Exhaust side dia : 450mm Refractory thickness : 200mm Fuel : Furnace Oil Burner : Model 4 A FD Fan capacity : 1250 cmh at 1000mm of WG Gear Box in drive : 8, 1:40 Ratio Motor in drive : 15.0 HP x 960 RPM Structure used for base : ISMC 250 x 80 Manufacturing Process Lead to be manufactured from Rotary Furnace can be obtained directly from scrapped batteries or as slag from Mini Blast Furnace. In case of former, batteries are cut open or broken to segregate lead scrap, plastic and other materials from them; lead scrap in the form of lead powder/ plates etc. is charged in the furnace along with a proportionate charge of additives. In the case of latter, slag produced from Mini Blast Furnaces is charged into the Rotary Furnace, again with proportionate additives. This process is a batch type process. After filling the required quantity of raw material (either manually or mechanically), the lid of the furnace at the front is closed. The burner attached to the moving door is then fired. Complete mass of lead raw. Material along with additive chemicals is heated at high temperature inside the furnace. After some time, molten lead is collected at the bottom of the furnace by puncturing the central opening of the Rotary Furnace. Lead is collected either directly into Jumbo Ingot Moulds or in receiving channels from which they are poured into Jumbo Ingot Moulds. After draining the Furnace of the first batch, production of next batch is undertaken and the Furnace is again charged with raw material. After three such batches, one batch of slag collected in Rotary Furnace is executed. This process leads to generation of flue gases which are toxic in nature and need appropriate and adequate Air Pollution Control System for their treatment. The steps of Charging and Tapping of Rotary Furnace also lead to generation of Fugitive Emissions which need to be captured at source and treated to maintain ambient air standards at workplace. Process Details of a typical 3.0 TpB Rotary Furnace Raw Material Charged3000 kgs/ Batch Total additive chemicals charged:400-500 kgs/ Batch Rotational speed1-2 RPM Fuel usedFurnace Oil Calorific value of fuel used8600 kCal/ kg. Fuel consumed30-40 lt/ hr. Air provided for process1250 cmh Lead produced9000-10000 kg/day (for Raw Material feed of 12-15 T raw material being lead powder and plates) Flue gas generation15000 cmh Section View of Rotary Furnace Advantages and Disadvantages of Rotary Furnace Advantages Recovers 100% lead in the first operation. Slag produced is lead free. Equipment can be scaled up for higher production capacities. Disadvantages Many chemicals are required for operation. High power consumption. Difficult to produce low Antimony lead suitable for soft lead purposes. Fugitive Emissions need to be captured in addition to flue gases. Need skilled operators and careful maintenance. Air Pollution Control Device for Rotary Furnace Apart from plates and paste of lead oxide from scrap batteries, slag from Mini Blast Furnace is charged in the Rotary Furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and such other impurities etc. Hence, to meet various goals of maintaining employees' health and factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Rotary Furnaces. Characteristics of Air Pollution generated in Rotary Furnace Selection of Technology for Air Pollution Control System Based on the parameters and the standards mentioned, the following technology is adopted for Air Pollution Control System in Rotary Furnace: Rotary Chamber Gravity Chamber Involute Cyclone Pulse Jet based Bag House Filtration System Details of Equipments allow with Functions Rotary Chamber Rotary Chamber receives very hot gases from Rotary Furnace while cold gases from atmosphere are induced into chamber via specially designed profile. Thus chamber works as an equalizing chamber to reduce the temperature of gases and also where sedimentation of dust particulate matter takes place. Duct & Bends Ducts and Bends are required to convey flue gases from point of suction to final top of the chimney and connect various equipments like gravity chamber, cyclone, bag house, ID Fan and chimney. All bends and reducers are aerodynamically designed and have provision of manhole cleaning mechanism. Gravity Chamber It is a low pressure drop device which: Allows large size particles to settle down Cools down temperature of flue gases Used as spark arrestor to entrap live or red hot particles. Involute Cyclone Cyclone is used to remove medium size particles from flue gases stream. The treated flue gases are discharged from top and dust is collected at bottom. Bag Filtration System It is used for final filtration of flue gases to remove fine dust particulate matter using Pulse Jet Technology. Treated gases from all the bags are collected at top of bag house and passed through ID Fan to exhaust the same through chimney. The dust is collected at bottom of hopper and is discharged through Rotary Air Lock Valve. ID Fan ID Fan provides necessary driving force to convey flue gases from top of furnace to top of the chimney. The volume sucked overcome the total resistance offered by equipment and duct with the help of fluid horse power provided by ID Fan driven by suitable motor. Stack (Chimney) The generated gases are passed into atmosphere after treatment through chimney of suitable height and diameter. At the time of Delivery
Product Detail: Description floor standing constant oxygen purification series TG-KJY600 is the unique design in air purifier field . Can effectively purify the indoor PM2.5, formaldehyde, TVOC, bacteria, dust, smoke, etc. the bottom of the device with four wheels can brakes or move at any time. mainly include pre filter, HEPA filter, Electrostatic ion generator, catalytic activated carbon filter, negative oxygen ion generator;carbon dioxide, PM2.5 , formaldehyde, TVOC, temperature and humidity sensor. The outer shell is provided with a sheet metal box body, and with a large area liquid crystal display screen and Touch control button. From the display screen can detect the content of carbon dioxide, PM2.5, formaldehyde, TVOC indoor. Can install mobile APP remote operation and control. The Air Purifier is the perfect way to improve the air quality in your personal space! The Cube air purifier is ideal for office cubicles, dorm rooms, work spaces, hotel rooms, and more. it is enough to be portable and convenient. ultra quiet operation make the air purifier a great addition to any space, public or private! Description 1.Efficiently removal of fine particles ,harmful gases, bacteria, viruses and others in the air. 2.Air quality real-time online detection, digital display. 3.Intelligent detection of purification unit, automatic maintenance and reminding. 4.Multistage wind speed can be adjusted at random. 5.Indicating product operation instructions. 6.With casters, convenient for moving. Specification Model TG-KJY600 Rated voltage ~220V/50Hz Rated power(W) 90 PM2.5 purification air(m³/h) 500 Formaldehyde purification air(m³/h) 400 Noise(dB) 99 Formaldehyde purification rate(%) >99 Benzene purification rate(%) >99 TVOC purification rate(%) >99 Ammonia Purification Rate(%) >99
Portable Air Conditioner Air Cleaner with Humidifier Function ZL Beijing Tiangong Environmental Technology (Chongqing) Co., Ltd Products: Air filter, water purifier, Water Dispenser, car washer; Air purifier for home, car, office, School, Medical, Industry etc; Standards: Floor standing, portable, wall mounted, ceiling, hanging, central air Conditioners, desktop etc Service: Three year warranty Advantage: Can OEM Customize Size, Function Certificates: EAC, CE, OHSAS, ISO 14001, ISO 9001 etc Annual Sales Turnover: 15000000USD Cover of Land: 15000 Square Meters --------------------------------------------------------------------------------------------------------------------------------- Product Detail: Description The Air Purifier is the perfect way to improve the air quality in your personal space! The Cube air purifier is ideal for office cubicles, dorm rooms, work spaces, hotel rooms, and more. it is enough to be portable and convenient. ultra quiet operation make the air purifier a great addition to any space, public or private! Feature 1.Remove harmful gases, bacteria and viruses and so on efficiently 2.Real time online monitoring of air quality, with digital display 3.Intelligent detection of purified units and automatic remind of maintenance 4.Multistage speed are available and adjustable 5.Operation state indication 6.Humidifier Specification Net Weight(Kg) 12 Power(W) 65 Dimension(mm) 390x 245x600 Noise(dB) 99 Benzene purification rate(%) >99 TVOC purification rate(%) >99 Ammonia Purification Rate(%) >99 ***where needed? Home//house//office//hospital//industrial//supermarket//shopping//mall //school etc ***Air purifier Purifying technology contaminated air?Pre-Filter?Electrostatic ion generator?HEPA Filter?Catalytic activated carbon Filtration?negative oxygen ion generator?pure air ***HEPA Filter Captures up to 99.97% of airborne particles as small as 0.3-0.5 microns that passes through the unit including mold, spores, dust and pollen. Since HEPA filters remove airborne particles such as dust, pet dander, pollen, tobacco smoke, fabric fibers and mold spores, they provide a great way to reduce allergic reactions and improve air quality. ***Negative oxygen ion technology? Unique electrostatic ion device, By ionizing the particles with charge, in the high voltage electrostatic field, efficient sterilization; with charged particles are adsorbed on the opposite polarity of the plate, high efficiency dust. ***APP control Through the phone to install APP control software, to achieve remote control of air purification device, more intimate. ------------------------------------------------------------------------------------------------ Please send us an inquiry to get latest price and more info. Thank you:)
Product Detail: Description The Air Purifier is the perfect way to improve the air quality in your personal space! The Cube air purifier is ideal for office cubicles, dorm rooms, work spaces, hotel rooms, and more. it is enough to be portable and convenient. ultra quiet operation make the air purifier a great addition to any space, public or private! Feature 1.Efficiently removal of fine particles ,harmful gases, bacteria, viruses and others in the air. 2.Air quality real-time online detection, digital display. 3.Intelligent detection of air purification, automatic maintenance and reminding. 4.Multistage wind speed can be adjusted at random. 5.Indicating product operation instructions. 6.App control, mobile phone monitor and manipulate, real time and effective. Specification Model TG-KJB300 Rated voltage ~220V/50Hz Rated power(W) 45 PM2.5 purification air(m³/h) 300 Formaldehyde purification air(m³/h) 100 Noise(dB) 99 Ammonia Purification Rate(%) >99 Formaldehyde purification rate(%) >99 Benzene purification rate(%) >99 TVOC purification rate(%) >99 Applying space(m³) 15-30 ---------------------------------------------------------------------------------------------------------------------------------------------------------------- ***where needed? Home//house//office//hospital//industrial//supermarket//shopping//mall //school etc ***Air purifier Purifying technology contaminated air?Pre-Filter?Electrostatic ion generator?HEPA Filter?Catalytic activated carbon Filtration?negative oxygen ion generator?pure air ***HEPA Filter Captures up to 99.97% of airborne particles as small as 0.3-0.5 microns that passes through the unit including mold, spores, dust and pollen. Since HEPA filters remove airborne particles such as dust, pet dander, pollen, tobacco smoke, fabric fibers and mold spores, they provide a great way to reduce allergic reactions and improve air quality. ***Negative oxygen ion technology? Unique electrostatic ion device, By ionizing the particles with charge, in the high voltage electrostatic field, efficient sterilization; with charged particles are adsorbed on the opposite polarity of the plate, high efficiency dust. ***APP control Through the phone to install APP control software, to achieve remote control of air purification device, more intimate. ------------------------------------------------------------------------------------------------ Please send us an inquiry to get latest price and more info. Thank you:)