M3000 high-frequency module has two types: m3000a and m3000d, with different frequency band. The module consists of transmitting voice signal, modulation, power amplification, noise amplification, voice signal demodulation and signals procession. It begins to work normally by simply adding an external mcu, an audio amplifier, a mic (microphone) and a speaker.
The module is with small volume. It is easy to develop within short period. It could be made into small walkie-talkie, and be used in other mobile handheld devices. It is practical and easy to use, and may be widely used in gifts, catering, tourism and other industries.
M3000 golden phoenix is a display board for m3000 high frequency module of a mini walkie-talkie from mc devices. With m3000 golden phoenix, main functions of walkie-talkies could be realized. Main functions Frequency: any frequency point within 315mhz-385mhz or 390mhz-470mhz Power: 0.5w--1w(test voltage: 4.2v); 2w(test voltage: 7.4v) Receiving sensitivity:
M3000 silver phoenix is a mini walkie-talkie module developed by mc devices. Its size is as small as 31.75mm (length)x 20.828mm (width)x 6.5mm (height). A walkie-talkie is made by simply adding external speaker and power. The front side of m3000 silver phoenix is control board equipped with mcu, and its back side is m3000 high frequency module. M3000 silver phoenix may be easily embedded in a variety of portable devices, and work as walkie-talkies, which are widely used in tourism, hotel service and gifts. The easiest way is to fix a channel directly on the board, and connect a speaker and power. For more complicated application, channels selection and volume regulation may be achieved by simply adding a dip switch. Main functions Frequency:: 4-32 frequency points are randomly selected within 315mhz-385mhz or 390mhz-470mhz (occupying 2-5 i/o ports) Power: selected between 0.5w-1w(test voltage: 4.2v) Receiving sensitivity:
Compatible for any audio sources such as tv dvd/hi-fi player, computers, etc Ultra high frequency wireless headphone No limitation to the location of earphones within the effective range of the system No cable connection between transmitter and headphones is required as radio frequency signal can pass through wall, floor, ceiling or partitions Transmits 863mhz stereo signal up to 100 meter Unimited number of headphones of the same frequency can be used with this system 3 channels selection for better reception Auto power cut off the transmitter when there is no signal received Phase-locked loop (pll) technology
Dual-channel design, two Handheld (or Lapel) wireless microphone can be used together without interference. High-precision quartz crystal locked frequency. Looking noise to solve the problem of noise interference which is hard for general wireless receiver to overcome. High sensitivity and high S/N ratio, long receiving distance, and never staccato, never wander. Built-in noise reduction compress-expand circuit. Excellent selectivity, multi-channel simultaneously, without mutual interference. Standard metal casing, avoid interference effectively. Most suitable for Studio,Karaoke,Broadcast etc. Operating distance is up to 50 meters in ideal environment and 30-40 meters in the complex environment. Product Features: VHF220-270MHz wave band Frequency Response: 60Hz-16KHz3dB SNR:>90dB frequency stability:0.005% Output power:0-400mV T.H.D
Description and Application W-210A is a line array speaker which is made of two 10'' neodymium woofers, two 2'' titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields. W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15¡± neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion Model W-210A/W-250A Type Line array system Line array sub-bass system(W-250A) Frequency Response 55Hz-20KHz 3dB 40Hz-150Hz 3dB(W-250A) Directivity index(Dl) 12(¡À2)1.2KHz-16KHz Power handing LF 500W(RMS)1000W(PEAK) HF 160W(RMS)320W(PEAK) 1200W(RMS)2400W(PEAK)(W-250A) Sensitivity LF 99dB(1W@1M) HF 108dB(1W@1M) 112dB(1W@1M)(W-250A) MaxS.P.L LF 127dB(PEAK/1M) HF 127dB(PEAK/1M) 143dB(PEAK/1M)(W-250A) LF section 2¡Á10"(260mm) neodymium woofer 75mm(3in)coil Components 2¡Á15"(380mm) neodymium woofers 100mm(4in)coil(W-250A) Nominal impedance 16 ohm 4 ohm(W-250A) HF section 2¡Á2"neodymium compression driver with 51mm titanium diaphragm Nominal impedance 16 ohm Output section 2-channel Dispersion pattern 110¡ãH¡Á9¡ãV Finish Water-proof,wear-resistant textured black paint Array design Arrays of less than 3¡ÁW-210A will provide poor dispersion control and are neither recommended nor supported Speaker cables LF 1(+)1(-) HF 2(+)2(-) 1(+)1(-) (W-250A) Rigging system Please refer to the W-210A user manual before any operation Input connectors 2¡ÁNL4MP speakon Recommend crossover LF 45Hz-1200Hz HF 1200Hz-20KHz 35Hz-120Hz(W-250A). Dimensions 855*293*600mm(W*H*D) 855*610*820mm(W*H*D)(W-250A) Package dimensions 925*360*670mm/0.22cbm 925*680*890mm/0.56cbm(W-250A) Enclosure Birch plywood Net weight 42kg (W-210A)/ 81kg (W-250A) Gross weight 45kg (W-210A)/ 84kg (W-250A).
Graphic LCD module ,from 122x32 dots .....320x240 resolutions AGM240128A 144(L)x104(W)x12.9(H) 113.5(L)x64(W) 0.42x0.42 T6963C COB, COF, COG, TAB Display TN, STN FSTN, Full Col TFT Reflective. Transflective Transmissive All Cols Available EL, LED. CCFL Backlight Standard Wide Temperature Operating Range 5V supply, positive * negative voltage Controller with driver .
The high-frequency module is used exclusively for uhf wireless mic. With audio circuit, transmitting module (tx) could be made into a complete wireless speaker or belt-pack transmitter. Receiving module (rx) consists of noise amplification, one time frequency mixing, twice mixing, local oscillation, mcu frequency control and other functions. With audio circuit, it could be made into a complete wireless mic receiver. By applying d2008 directly, factories could simplify design and production of uhf wireless mic, and adopt the module easily in mining industry and electronic consumer system equipments.
Hy-2677e2 is constituted by host screen, requester (1-key, 2-key, 3-key are all available), and remote controller. By applying advanced frequency modulation (fm) wireless technology, it is quite a high-technology, style electronic product with little and beauty appearance. Weight:0.8kg Dimension:460*200*80mm
At-828 two way radio: Specification: frequency range: vhf:136-174mhz uhf:400-470mhz channel: 100 channels channel space: broadband25khz, narrowband12.5khz channel step: 5, 6.25, 10, 12.5, 25khz working power: 7.2v dc ía 20% temperature range: - 20ípc ~ + 60ípc frequency stability: ía 50ppm product size: 90*55*32mm(antenna exclusive) communication distance:5km(no shadow) battery: 1200mah lithium batteries Transmitter: output power: 5w(high)/2w(middle)/1w(low) modulation: broadband16kª¦f3e, narrowband 11kª¦f3e max frequency deviation:broadband
