Lyhy Triple Row Slewing Bearing

As a professional triple row cylindrical roller combined slewing bearing manufacturer in China, we mainly provide internal gear type triple row cylindrical roller combined slewing bearings, external gear type triple row cylindrical roller combined slewing bearings and no gear type triple row cylindrical roller combined slewing bearings. Characteristics of Triple Row Cylindrical Roller Combined Slewing Bearing 1. Our triple row cylindrical roller combined slewing bearing has super high carrying capacity. 2. It consists of three bearing rings. The adjusting spacer between upper bearing ring and lower bearing ring can adjust the axial internal clearance. 3. Upper row rollers and lower row rollers are distributed horizontally, so as to support the axial forces and tilting moments from two directions. While radial force is supported by the third row rollers that are vertically distributed. 4. Since our triple row cylindrical roller combined slewing bearing is firm in structure and large in axial dimension and radial dimension, it is quite suitable for use in heavy duty machinery, such as bucket-wheel excavators, wheel cranes, ship cranes, port cranes, molten steel operating platforms, and so on. I am pleased to recommend our company and its bearings. Our company was set up in 1998, specialized in the design and production of slewing bearings. We began to export in 2003, users have covered scores of countries. Sales and market has been steadily growing in the passed years. Slewing bearings are very important parts to excavators and cranes, and their good performance will ensure your projects finish on time. Now products have expanded to slewing bearings, slewing drive, slewing gear, gear shaft etc. our bearings can be found in SANY, SUMITOMO, KATO, KOMATSU, JCB, HITACHI,CATERPILLAR and other brand excavators.

Double-row ball slewing bearing (02 series) 1. Description : The two-row ball slewing bearing has three seat-rings. The steel balls and the retainers may be directly arranged into the upper and lower racers. Two rows of steel balls with different diameters are fitted according to the force. Such open type fitting is extraordinary convenient, the loading angels at upper and lower races are 90 which can carry both of the axial force and capsizing moment. When the radial force is larger than 1/10 of the axial force, the races should be newly designed. 2. Packing 1 Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film; 2 And then packed with craft paper and professional belts; 3 At last, with wooden box totally at the outer packing to invoid the rust or the moist; 4 We can depend on the customers demand to be packed; 3. Features Larger dimension of axial and radial, compact structure. 4. Applications Tower cranes which require working radius over medium range, auto crane and loading (unloading) machinery. Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film;and then packed with kraft paper and professional belts; at last, with wooden box totally at the outer packing to invoid the rust or the moist; we can depend on the customers demand to be packed.

We have been specialized in manufacturing slewing bearings, spherical roller bearings, taper roller bearings, deep groove ball bearing, and other bearings since 2000. 1) slewing bearings: 1.Single-row four-point contact ball slewing bearing 2.Double-row ball slewing bearing 3.Single-row crossed roller slewing bearing 4.Three-row roller slewing bearing 5.Trailer turntable 6.Light flanged slewing bearing 2) specification: Diameter: 200mm~6000 mm (8"~ 240") Standard outer diameters: 480mm~5000mm (18"~196") Load capacity: Maximum thrust: 105, 060 kn (23, 630, 000 lbs) Maximum moment: 110, 000 kn-m (81, 136, 000 ft-lbs) 3) application: Construction machinery (e.G. Cranes, excavators, loader, scraper) Metallurgical machinery (e.G. For steel plant) Heavy machinery equipments (e.G. Mining machinery, concrete machinery) Marine machinery equipment (e.G. Vessel, port hoisting machine, port oil transfer equipment, onshore and offshore crane) Light machinery equipments (e.G. Paper machine, plastic, rubber machine, weave machine) Wind power generator Military products (e.G. Aerospace machinery) Packing machinery Inner dameter more than 200mm

Single-row crossed roller slewing bearing 11 series 1 Description The single-row cross roller slewing bearing is composed two seat-rings. It has small fitting clearance and higher requirements for precision. As the rollers are 1:1 cross arranged, thus can carrying the simultaneouly for of axial force, larger radial force and capzising moment. 2 Packing 1Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film; 2And then packed with kraft paper and professional belts; 3At last, with wooden box totally at the outer packing to invoid the rust or the moist; 4We can depend on the customers demand to be packed; 3 Features Compact structure, light weight, high precision 4 Application Lifting machinery, engineering machinery and military products Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film; And then packed with kraft paper and professional belts; At last, with wooden box totally at the outer packing to invoid the rust or the moist; We can depend on the customers demand to be packed;

Single-row four point contact slewing bearing (01 series) 1.Description: The single-row four point contact ball slewing bearing is composed of 2 seat-rings. The balls contact with the circular race at four point,via which the axial force, radial force and resultant moment may be born simultaneously. 2. Packing 1 Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film; 2 And then packed with kraft paper and professional belts; 3 At last, with wooden box totally at the outer packing to invoid the rust or the moist; 4 We can depend on the customers demand to be packed; 3. Features: Compact in structure and light in weight. 4. Application: slewing conveyers, welding arm and positioner, medium duty cranes, excavators and other engineering machines. Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film; And then packed with kraft paper and professional belts; At last, with wooden box totally at the outer packing to invoid the rust or the moist; We can depend on the customers demand to be packed;

Supplier: Gear and bearing