"Sporex-UK" thermodynamic type steam trap with inbuild strainer : avoids clogging
Screwed female bsp taper ends / socket welded ends
Hardened disc to withstand continuous water hammering
All stainless steel construction : better mechanical properties
Seat integral with body : no possibility of leakage from joints .
1/2" - 0.900 kg
3/4" - 0.900 kg
1" - 1.400 kg.
Model: TB Series Features: 1. Tight shut-off and long service life by using SCCV system; 2. Efficient energy saving -----Adjustable discharging temperature and effectively using the sensible heat of hot condensate. 3. Discharging temperature can be adjusted when the pipe net is in operation, can be installed in any direction. 4. Hot condensate exixts just before the trap, forming a tight water seal, which ensures no steam loss. 5. Withstands water hammer with outstanding performance of air venting. 6. Operating withiout noise, benefiting for environmental protection. 7. Full open at the beginning of steam supplying, discharging cold condensate and air rapidly, which ensures quick start-up. 8. Staniless steel inernals are resistant to corrosion and cavitation. Small in size and light in weight, easy maintenance. Application: Suitable for steam main pipe, steam tracer, radiator, low temperature heating trough, jacketed kettle and heating system etc. Note: Insulation is not recommended for pipe section 1 meter before the trap and the trap itself. Wooden cases.
Pressure rating : 1.6- 2.5mpa Specification : dn15-25 Material : cast steel Standard flanges : din ansi jis jb79. Structural characteristic 1.The valve adopts two kinds of sealing, e, g, balance double valve seat and single valve seat with reliable closedown and long life. 2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam. 3.No noise before operation in favor of environmental protection. 4.At the beginning of ventilation, all the valves start and lowtemperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment. 5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.
Structure characteristics: 1.The valve applies the principle that bimetal strip will expand when being heated and contracted when cooled to realize the start/closedown effect of drainage and air resistant. 2.Small type light weight design, convenient installation in any angle. 3.At the beginning period of operation, the air and condensate water can be rapidly discharged without airlock. 4.Sensitive induction for continuous discharge, without noise, and strong corrosive resistance. main application: Bimetal drain valve can be used in different industrial steam heating systems including power station, petroleum, chemical industry, paper making, light textile, and metallurgy ,etc. and can automatically discharge the condensate water out of the steam heating system to ensure the system can work efficiently under the condition of saving energy.
Speciality valve is a leading and most trusted Ball float steam trap manufacturer in India. A Ball float steam trap is a type of mechanical steam trap which relies on the difference in density between steam and condensate in order to operate. These steam traps can pass massive amounts of condensate and are suitable for a wide range of process applications. Advantages of ball float steam trap: These are resistant to water hammers. Ball float steam traps can handle light and heavy condensate loads without getting affected by fluctuations in pressure rate or flow. Ball float steam traps have a variety of applications. Applications of Ball float steam trap : Ball float steam traps are used in heating ovens. They are used in drying cylinders. Ball float steam traps are used in separator drainages. Description: Body material: Carbon steel, cast steel (WCB, WCC, LCC, WC6, LCB, WC9), stainless steel (SS316, SS304, CF8), ductile iron. Class: 150 to 2500. Size: 4 Ends: Socket weld butt weld, flanged, threaded. Operation: Manually operated
Speciality valve is a leading and most trusted Ball float steam trap manufacturer in India. A Ball float steam trap is a type of mechanical steam trap which relies on the difference in density between steam and condensate in order to operate. These steam traps can pass massive amounts of condensate and are suitable for a wide range of process applications. Advantages of ball float steam trap: These are resistant to water hammers. Ball float steam traps can handle light and heavy condensate loads without getting affected by fluctuations in pressure rate or flow. Ball float steam traps have a variety of applications. Applications of Ball float steam trap : Ball float steam traps are used in heating ovens. They are used in drying cylinders. Ball float steam traps are used in separator drainages. Description: Body material: Carbon steel, cast steel (WCB, WCC, LCC, WC6, LCB, WC9), stainless steel (SS316, SS304, CF8), ductile iron. Class: 150 to 2500. Size: 4
Function:Free floating ball steam trap which is developed in the 80th, is the advanced steam trap in the world wide. It wildly used on vapor equipment, pipeline and cooling water reclaiming system, to protect vapor from leaking and exhaust cooling water quickly. character:free floating ball consists of float, stress lever, disc, is the only movable element in the steam trap. Furthermore, we adopt the high-accuracy stainless steel grinding free floating ball which manufactured by ourselves, so there isn't concentrated abrasion, high reliability quality and long-life; with good sealability, low leakage rate, and excellent power saving. Possessing automatic discharge air equipment, quickly start up, exhaust cooling water continually; high backing pressure, low subcooled temperature, noiseless; high operation quality,easy to reclaim the cooling water. performance:1,minimum pressure discrepancy:0.01MPa; 2,highest backing pressure ratio: 85%; 3,leakage ratio12000 hours 5,subcooled temperatureºC; 6,energy conservation:15~30%. Bi-metal elements steam trap Function: Series of bi-metal elements steam trap are widely used in the heating system, tracer heating system, and tracer heating line in petroleum, chemical, medicine, food industries, to protect vapor and high-temperature cooling water from leaking. Performance:1,highest backing pressure ratio 80%; 2,leakage ratio8000h. 4,energy conservation30%. Lever floating double valve carrier type steam trap Function:widely applied to industrial steam equipment, protecting vapor from leaking efficiently, exhausting cooling water quickly. Character:adopt the structure of double valve carrier,small volume,large discharge,possessing the auto discharge air equipment, start up quickly. Performance:1,Maximal operation pressure:1.6MPa; 2,Leakage ratio12000h. 4,maximal cooling water discharge40T/h Free floating ball air valve Function:widely applied to air compressed system, exhaust cooling water quickly, which formed during the air compressing Character:adopt high-accuracy stainless steel grinding to free floating ball, with excellent sealability, high reliability and long-life quality.
Structure characteristics: 1.For strong applicability of condensate water volume, it can discharge intermittently or continuously. 2.Large displacement double seat differential pressure mechanism and SCCV closing system are inbuilt so as to obtain small volume and large displacement. 3.Convenience in maintenance and service for the whole internal components made of stainless steel and installed on the bonnet. 4.High backing pressure rate: 90%. 5.Reliable gas-water separation. The valve is always in water sealing state and effectively keeps the steam from leakage. 6.The open-top float is water hammer resistant. The bucket is designed with overflow exhaust holes to effectively prevent from the steam lock or air block. 7.In combination with lever mechanism to compose high pressure valve.
Structure characteristics: 1.Automatic blowoff mechanism is installed the valve. It is of new-type crown valve plate with reliable sealing, and steam heat preservation mechanism with high-temperature energy conservation. 2.Rapid air and condensate water exhaust while starting the equipment, great displacement and small steam leakage. 3.Strong anticorrosion, reliable operation and durability. 4.Free of adjustment and remarkable energy-saving result within the working pressure. main functions: Used in the steam subcritical status for high-temperature and pressure sasturation, steam main pipeline and turbine.
Structure characteristics: 1.The valve adopts two kinds of sealing, e.g. balance double valve seat and single valve seat with reliable closedown and long life. 2.There is always condensate water available in front of the valve with reliable water sealing and non-leakage of steam. 3.No noise before operation in favor of environmental protection. 4.At the beginning of ventilation, all the valves start and low-temperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment. 5.Internal components is made of stainless steel, corrosion and cavitation erosion proof.