CRUSH YOUR AT-HOME WORKOUTS: Bear KompleX genuine leather Hand Grips are the perfect gloves for you to knock out your workout. You have a 2-Hole & 3-Hole option to protect your palms. The Grips are breathable and designed with an adjustable wrist strap for optimal comfort and support. Choose a color option that matches your style. DURABLE QUADRUPLE STITCHING will ensure full support and stability when using the Bear KompleX gymnastics grips. Enjoy the stronger & longer hold on the bar! These gloves will NOT dig into your wrist or open up during use. You shouldn't have to worry about your hands when dominating your WOD! MEASURE CORRECTLY: To ensure you get the best out of your Hand Grips, make sure to measure your hands and ring size following the instructions in the image block. If you are between sizes or prefer a loose fit with a fold, go up in size. We are so confident you will love our Bear KompleX products, that if your expectations are not met for any reason, we will refund you within 60-days of purchase. SUPERIOR LEATHER WILL REDUCE SLIPPING: on the bar and allow you to keep banging those pull-ups out. Great for the speal bar as well! Protect your hands and palms during Pull-ups, Chest to bar, Muscle ups, Toes to Bar (T2B), Knees to Elbow (K2E), Kettlebell swings, Power lifting, Power Cleans, Deadlifts, Snatches, Gymnastics, and more.
CRUSH YOUR AT-HOME WORKOUTS: Bear KompleX genuine leather Hand Grips are the perfect gloves for you to knock out your workout. You have a 2-Hole & 3-Hole option to protect your palms. The Grips are breathable and designed with an adjustable wrist strap for optimal comfort and support. Choose a color option that matches your style. DURABLE QUADRUPLE STITCHING will ensure full support and stability when using the Bear KompleX gymnastics grips. Enjoy the stronger & longer hold on the bar! These gloves will NOT dig into your wrist or open up during use. You shouldn't have to worry about your hands when dominating your WOD! MEASURE CORRECTLY: To ensure you get the best out of your Hand Grips, make sure to measure your hands and ring size following the instructions in the image block. If you are between sizes or prefer a loose fit with a fold, go up in size. We are so confident you will love our Bear KompleX products, that if your expectations are not met for any reason, we will refund you within 60-days of purchase. SUPERIOR LEATHER WILL REDUCE SLIPPING: on the bar and allow you to keep banging those pull-ups out. Great for the speal bar as well! Protect your hands and palms during Pull-ups, Chest to bar, Muscle ups, Toes to Bar (T2B), Knees to Elbow (K2E), Kettlebell swings, Power lifting, Power Cleans, Deadlifts, Snatches, Gymnastics, and more.
CRUSH YOUR AT-HOME WORKOUTS: Bear KompleX genuine leather Hand Grips are the perfect gloves for you to knock out your workout. You have a 2-Hole & 3-Hole option to protect your palms. The Grips are breathable and designed with an adjustable wrist strap for optimal comfort and support. Choose a color option that matches your style. DURABLE QUADRUPLE STITCHING will ensure full support and stability when using the Bear KompleX gymnastics grips. Enjoy the stronger & longer hold on the bar! These gloves will NOT dig into your wrist or open up during use. You shouldn't have to worry about your hands when dominating your WOD! MEASURE CORRECTLY: To ensure you get the best out of your Hand Grips, make sure to measure your hands and ring size following the instructions in the image block. If you are between sizes or prefer a loose fit with a fold, go up in size. We are so confident you will love our Bear KompleX products, that if your expectations are not met for any reason, we will refund you within 60-days of purchase. SUPERIOR LEATHER WILL REDUCE SLIPPING: on the bar and allow you to keep banging those pull-ups out. Great for the speal bar as well! Protect your hands and palms during Pull-ups, Chest to bar, Muscle ups, Toes to Bar (T2B), Knees to Elbow (K2E), Kettlebell swings, Power lifting, Power Cleans, Deadlifts, Snatches, Gymnastics, and more.
Material: Composite Type: Baseball Weight: 30 oz. Brand: Easton Model: S1 Length: 33" Product Features - BBCOR Certified - 2 5/8 Inch Barrel Diameter - (-3) Length to Weight Ratio - IMX Composite Barrel - Patented two-piece Connexion - Speed Design for low MOI - Faster Swing Speed - No Warrenty Provided.
Material: iron bar inside and foam fabric Weight: 1lb*2, 2lb*2, 3lb*2, 4lb*2 Poly bag, double blister, color box
Additionally to the solid state of the Autowalker the Twist Car developers put a lot of emphasis on safety: Access covers on the rear Wheel cases are preventing little fingers from getting caught inside. The patented supporting front wheel allows a safe ride even with 360-degree steering movements. The low streamlined back portion was especially designed to prevent any turnovers 1) Swing car is an ideal toy designed for baby to do exercise and improve Physical skill 2) It is made of environment-friendly material, no harm to baby 3) For there is no electric and mechanical element, it is a very safe toy 4) Using: Just keeping swing the steering wheel, it will go forward Introducing the wiggle racer!. The gaoxin new ride-on toy that needs no power source other than Wiggle Power! A simple movement of the steering control from left to right and the driver's own body gravity are all it takes to go forwards or backwards! It also works in reverse! All you do is rotate the steering wheel around and keep wiggling! To stop the Wiggle Racer, just quit moving the steering wheel and, when the car slows, put your feet on the ground to bring it to a full stop. It's that easy! And parents, this toy is durable. It is made of the finest materials and will give your kids years of fun! Anyone up to 220 pounds can ride it, so parents. Be sure to let the kids play too! 1Configuration: Cartoon & horn Loading weight: 100 kg Product dimensions: 79*29*29 cm Outer packing: By carton Carton size: 79*39*52.5cm Package: 4 PCS/CTN G. W.: 15KG N. W.: 13KG Qty/containet: Qty/20"FCL: 640 PCS Qty/40"HQ: 1620 PCS
Details for inflatable slide: 1. Material: 1000D,18Oz PVC tarpaulin,0.55mmthick PVC Tarpaulin,650g/m2.Fire Retardant,Anti-UV. 2. Size: 19'H X 22'W X 26'L or comply with customers' requirements 3. Weight: 675LBS 4. Thread: Non-rotting Yarn with 90N Tensile Strength. 5. Workmanship: Double to Quadruple stitches throughout the whole structure..Norms NEN 14960 Standards-Safety Guaranteed. 6. Packing: Blanket(inside pack)+PVC Tarpaulin bag(Outside)=double protection to the goods. 7. Blower: come with CE/UL blowers. 8. Accessory: Repair patches,Glue. Blanket(inside pack)+PVC Tarpaulin bag(Outside)=double protection to the goods.
Describe the idea and what it actually does: The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Golf shaft The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
