Sdh Stm - 1

Contact: amily[at]veecom dot com dot cn GPRS200 MODEM as a standard RS232c interface, result in widely extending the applicable fields of GPRS. It can be applied in the desk computer, notebook computer and other control system terminal. It has a highly frequency stability. PRODUCT FEATURES: Always on-lined and high-speed connection. Easily installation: Neednf+t any driving program. It can be dialed-up using RS 232 interface with common modem. DualBand GSM/GPRS modem (EGSM900/1800MHZ,900/1900MHZ) designed for gprs Networkf=Data faxf= SMS and voice application. Transmitting speed: 115.2K BPS (theoretical), 30f¼50K BPS (under the CHINA Mobile network) Channel spaces: 200Kpbs Stability of frequency: 0.1ppm Operating temperature:-20ºC--+60ºC Storage temperature: -30ºC--+85ºC Humidity: 98% Vibration(non working): 25g. Operating power: 15mA INTERFACES RS-232C and audio through mini sub-D 9-pin connector supporting: Remote control by AT commands(GSM07.07 And 07.05) Audio use a stereo earphone connecter antenna interface 50 ohm MMCX connecter LED indecter SMA Sliding SIM holder(3V/5V SIM interface) Antenna vonnector 6V-15V DC POWER SUPORT OPERATION SYSTEM DOS,WINDWS 9X,ME,NT,2000,XPf=LINUXf=UNIXf=POCKET PCf=MAC APPLICATION: Remote controller, Integrating system. DIMENSIONS: 100x54x25mm WEIGHT: 200g.

Overview: contact: amily[at]veecom dot com dot cn FME-2 provides two interfaces of E1(g.703) or V.35, and the rate to every transmitting channel of E1 or V.35 can be up to 2Mbps. It was made by ASIC circuitry technology, we can also call it " PDH" Feaures: FME-2 is high-speed fiber optic modem with two E1/V.35 interface optional. The two interfaces of FME-2 can be V.35 or E1 (G.703), and also one can be V.35, another is E1 (g.703). The data transmitting rate is from N*64K (N=1-31) to 2048 Kbps. The clock is optional internal, external and slave. To achieve point to point testing, FME-2 can process the diagnosis of some troubles though the switch AL, DL and RL. There are many indicators LEDs on the panel to display work state, such as PWR, RXD,TXD, SYNC, TEST... E1 (G.703) interface comply with ITU-T G.823, G.703 and G.742, it can be impedance balance120ohm (RJ45) or unbalance 75ohm (BNC) The requirements to the fiber can be single mode/multi mode, single core/double core, SC/FC/ST, 2km/20km/40km/60km Power supply: AC 220V or DC -48V. DIMENSIONS: 240mm*215mm*50mm (L*w*H)

Contact: amily[at]veecom dot com dot cn GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter. GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line. GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast. 245mm*215mm*50mm

10/100 MBPS managed media converter Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. Hardware Function Support 10Base-T, 100Base-TX, 100Base-FX Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards Up to 5km distance on multi mode optical port and 120km distance on single mode optical port High-performance auto-negotiation chips make sure the data transfer with higher Security, stability and without block. Up to 1916 bytes package forwarded Support half/full duplex mode Auto-negotiate Low power consumption, low heat generation and excellent compatibility 10Watt professional communication power supply module inside the standalone. Chassis supports double redundant power supply modules and each power supply module Supports up to 100 Watt power output for the security and stability Support hot-swap for all the modules, but not including management module Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable. Device Size Standalone: 132mm (width)*36mm (depth)*122mm (height) 19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)

Tx-1310/rx-1490 nm single-mode bi-directional Sfp simplex connector 155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet Features: Compliant with sonet/sdh standard Compliant with fast ethernet standard Industry standard small form pluggable (sfp) Package: Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1

Overview: Dhodt-eoc is a converter for stm-1 converter electrical and optical interface conversion. It is designed for the pdh equipment coaxial interface and optical interface interconnect. Dhodt-eoc is an interface converter for stm-1 electrical and optical interface conversion.It is designed for the sdh equipment coaxial interface and optical interface interconnect, as well as the atm 155.520 mbps interface and sdh device interconnection. Complete loopback facility is supported for system diagnostic and commissioning.Compact casing and simple operation achieve the cost saving and investment protected. Features: 1. High reliability, comply with itu-t g.703 and g.957 2. Single fiber bi-directional is selectable 3. State-of-the-art design, ensure normal working under different environment. 4. Supports local and remote loop-back on electrical or optical interface for system diagnostic. 5. Suitable for sdh and atm 155.52 mbps interface interconnection. 6. Simple operation and maintenance 7. Compact design and low power consumption. Specifications: Electrical interface Standard:itu-t g.703 compliant Data rate:155.52 mbps Line code:cmi Physical connector:bnc coaxial Optical interface Standard:itu-t g.957 stm-1 Bit rate:155.520 mbps Coding:nrz Connector:sc Light source:laser diode Wave length:1310nm (typical), or 1550nm (optional) or single Fiber bi-directional (optional) Transmit power:-12dbm (1310nm) / -5dbm (1550nm) Receive sensitive:-36dbm (1310nm) / -38dbm (1550nm) Power supply Ac 220v10%, 50hz Dc¡¡ìc48v (optional) Consumption:5w Environment Temperature:050 Humidity: 90% (non condensing) Dimension Wd(mm): 245 x 215 x50 Carton.

Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment

Overview: As a key member of veecom metroedge-express sdh/mspp product family, dhodt-lmxe is a carrier-class, cost-effective, compact (only 3u high) stm-1/stm-4/stm-16 sdh/mspp platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional tdm and emerging data traffic for service providers. Dhodt-lmxe is a card based compact sdh equipment, designed mainly as a gateway node between the core sdh network and a number of remote cpe boxes. It may also be used as a multi service sdh adm node in a typical ring or mash network. The 3ru high 19 inch wide chassis of the dhodt-lmxe has 19 cards positions, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for network interface unit(niu) cards, and 14 slots for local interface unit(liu) cards. Features: *support up to stm-1/stm-4/stm-16 *large cross-connect matrix capacity is 96*96 high order vc-4 cross connection or 2016*2016 vc-12 or 96*96 vc-3 level full cross connection *support 1+1 msp, sncp protection *management channel can be dcc/e1/vc12 *clocking mode supports: internal clock / external clock / line clock / clock holdover *ethernet service supporting gfp encapsulation, vc12 virtual concatenation and lcas, p vlan and 801.1q vlan *e1 ber tester is embedded *support up to 110 ethernet over 8*e1 (eopdh or eoe) remote cpes *support up to 756 ethernet over 1*e1 (eopdh or eoe) remote cpes *support up to 110 ethernet over vc-12 (eosdh or eos) remote cpes *online upgrading *full redundancy design Carton.

XFP-10GLR-OC192SR 10GBASE-LR/LW and OC-192/STM-64 SR-1 XFP 1310nm 10km DOM Transceiver XFP-10GLR-192SR-RGD 10GBASE-LR/LW and OC-192/STM-64 SR-1 XFP 1310nm 10km IND DOM Transceiver XFP-10GLR-192SR-L 10GBASE-LR/LW and OC-192/STM-64 SR-1 XFP 1310nm 10km DOM Transceiver XFP-10GER-192IR-RGD 10GBASE-ER/EW and OC-192/STM-64 IR-2 XFP 1550nm 40km IND DOM Transceiver XFP-10GER-192IR-L 10GBASE-ER/EW and OC-192/STM-64 IR-2 XFP 1550nm 40km DOM Transceiver XFP-10GER-192IR+ 10GBASE-ER/EW and OC-192/STM-64 IR-2 XFP 1550nm 40km DOM Transceiver If you have any questions, please contact with me, I will try my best for you! Best Wishes Helen Newstar Networking Technology Co., Ltd.