Repeater

Features: * It regenerates the incoming HDMI signal by decoding and re-encoding it to a new standard HDMI signal so it can extend the transimission range without degradation. * Extends 1080p/UXGA up to 40 meter transmission distance(lower resolution signal can be transimitted longer). * HDCP 1.1 compliant. * No Power, Plug and play, easy to install. Specifications: * HDMI is compliant with HDMI 1.3 * HDMI HDCP is compliant with HDCP 1.1 * Downward compatible with DVI 1.0 and HDCP 1.0 * Operation frequency up to 165MHz * HDMI data rate: 1.65G bps(Single link) * Input/Output resolution * Cable Distance Support¡GOver 40m with twisted-pair * Dimensions (WxHxD)¡G27 x 15 x 50mm. * Cable Distance Support¡GOver 40m with twisted-pair * Dimensions (WxHxD)¡G27 x 15 x 50mm.

Product Description A perfect assistant for your router  This Wireless Range Extender is like personal assistant for your router. It works alongside your router to enhance transfer rates and to extend the range of your Wi-Fi network. Improve wireless coverage in all WLAN networks. The Wireless Repeater is designed to extend the range of the current wireless network and improve coverage , giving you the freedom roam anywhere in the house and access Internet.   Main Feature£º Wireless N speed, Up to 300Mbps data rate . Support Wireless Repeater Mode and Standard AP Mode . Supports WiFi Protected Setup ( WPS) feature. Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports. Software wizard for simple setup Features: Improve wireless coverage in all WLAN networks. Support Wireless Repeater Mode and Standard AP Mode. WLAN 802.11n for wireless high-speed access, downwards compatible with 802.11g(54Mbit/s) and 802.11b(11Mbit/s) standard. Provides up to 300Mbps transmission rates. Support 2.4GHz WLAN networks. Maximum WLAN security with WPA2, WPA and WEP(128/64). Software wizard for simple setup. Antennas integrated.   Color: White + Black Product size: Approx. 9.5 * 8cm / 3.74 * 3.15in Product weight: Approx. 108g / 3.8oz Package size: Approx. 18 * 11.8 * 6.6cm / 7.09 * 4.65 * 2.6in Package weight: Approx. 218g / 7.68oz   Specification  Ports:1x RJ45  Button: Reset ¡¢WPS  LED:1x LAN,1x WLAN,1x Power,1x WPS  Wireless Data Rates:300Mbps  Chipset:RTL8196E  Power Plug: EU/US/UK/Australia(option)  Power Supply: Internal DC5V/1A  Rated Voltage: AC 100-240V.50/60Hz System Requirements  WLAN access point/client according to IEEE 802.11n.g.b  110~ 230~volt socket  The WLAN client must support at least the WPA encryption standard  WLAN access point and the WLAN client with automatic IP address assignment (DHCP)  Forwarding of IPv4-based protocols/Address Resolution Protocol  The network name (SSID) of the WLAN access point must be set to "visible"   Wireless Standards IEEE802.11n¡¢IEEE802.11g¡¢IEEE802.11b¡¢IEEE802.3¡¢IEEE802.3u Interface 10/100M LAN Frequency Range 2.4-2.4835GHz Wireless Link Rate Up to 300Mbps Plug Type EU¡¢US¡¢UK¡¢AU£¨One product comes standard with one plug£© Power Supply Input: AC:100~240V; 50/60Hz Output: 5V/1A LEDs Power¡¢WIFI¡¢WPS¡¢LAN Button WPS Button Reset Button Temperature Operating Temperature: 0¡æ~40¡æ Storage Temperature: -40¡æ~70¡æ Humidity Operating Humidity: 10%~90%, non-condensing Storage Humidity: 5%~90%, non-condensing Dimensions 110mmX60mmX90mm Weight 109g Package Included  1 x Wireless-N WiFi Repeater  1 x RJ-45 Networking Cable  1 x English user manual

Product Description A perfect assistant for your router  This Wireless Range Extender is like personal assistant for your router. It works alongside your router to enhance transfer rates and to extend the range of your Wi-Fi network. Improve wireless coverage in all WLAN networks. The Wireless Repeater is designed to extend the range of the current wireless network and improve coverage , giving you the freedom roam anywhere in the house and access Internet.   Main Feature£º Wireless N speed, Up to 300Mbps data rate . Support Wireless Repeater Mode and Standard AP Mode . Supports WiFi Protected Setup ( WPS) feature. Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports. Software wizard for simple setup Features: Improve wireless coverage in all WLAN networks. Support Wireless Repeater Mode and Standard AP Mode. WLAN 802.11n for wireless high-speed access, downwards compatible with 802.11g(54Mbit/s) and 802.11b(11Mbit/s) standard. Provides up to 300Mbps transmission rates. Support 2.4GHz WLAN networks. Maximum WLAN security with WPA2, WPA and WEP(128/64). Software wizard for simple setup. Antennas integrated.   Color: White + Black Product size: Approx. 9.5 * 8cm / 3.74 * 3.15in Product weight: Approx. 108g / 3.8oz Package size: Approx. 18 * 11.8 * 6.6cm / 7.09 * 4.65 * 2.6in Package weight: Approx. 218g / 7.68oz   Specification  Ports:1x RJ45  Button: Reset ¡¢WPS  LED:1x LAN,1x WLAN,1x Power,1x WPS  Wireless Data Rates:300Mbps  Chipset:RTL8196E  Power Plug: EU/US/UK/Australia(option)  Power Supply: Internal DC5V/1A  Rated Voltage: AC 100-240V.50/60Hz System Requirements  WLAN access point/client according to IEEE 802.11n.g.b  110~ 230~volt socket  The WLAN client must support at least the WPA encryption standard  WLAN access point and the WLAN client with automatic IP address assignment (DHCP)  Forwarding of IPv4-based protocols/Address Resolution Protocol  The network name (SSID) of the WLAN access point must be set to "visible"   Wireless Standards IEEE802.11n¡¢IEEE802.11g¡¢IEEE802.11b¡¢IEEE802.3¡¢IEEE802.3u Interface 10/100M LAN Frequency Range 2.4-2.4835GHz Wireless Link Rate Up to 300Mbps Plug Type EU¡¢US¡¢UK¡¢AU£¨One product comes standard with one plug£© Power Supply Input: AC:100~240V; 50/60Hz Output: 5V/1A LEDs Power¡¢WIFI¡¢WPS¡¢LAN Button WPS Button Reset Button Temperature Operating Temperature: 0¡æ~40¡æ Storage Temperature: -40¡æ~70¡æ Humidity Operating Humidity: 10%~90%, non-condensing Storage Humidity: 5%~90%, non-condensing Dimensions 110mmX60mmX90mm Weight 109g Package Included  1 x Wireless-N WiFi Repeater  1 x RJ-45 Networking Cable  1 x English user manual

30W-ICS Repeater: Interference Cancellation System (ICS) Repeater is a personal network enhancement device with inbuilt Interference Cancellation System ICS Repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction. Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc. Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.

The RF front-end stage of the communication system is composed of passive devices such as a filter, a duplexer, a power combiner, an RF connector, and an RF switch. These passive devices are designed to maintain the possible linear characteristics in the operating range, but they have practically nonlinear characteristics. Passive intermodulation occurs when two or more different frequencies are used as inputs to a passive device having nonlinear characteristics. This phenomenon is called Passive IM (PIM). Intermodulation (PIM) signals are added as unwanted noise to an uplink band in a mobile communication system, which is a major noise source that deteriorates the signal to noise ratio (SNR). Therefore, the intermodulation (PIM) signal, which may cause a lot of losses in terms of operation, maintenance, and frequency use efficiency of the mobile communication system equipment, should be removed. A system for removing an intermodulation (PIM) signal existing in an uplink band of a mobile communication system is called a PICS (Passive Intermodulation Canceller System).

5W-ICS Repeater: The 5W High Power 2G 3G 4G Cell Booster Long Distance ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). The ICS Repeater (Interference Cancellation System) is a new kind of single-band RF repeater that can automatically detect and cancel the interference signals caused by oscillation of RF feedback between the Donor and Coverage Antennas in real time by adopting DSP (Digital Signal Processing) technology. It can continuously and stably cancel the interference signals and be adapted to any changes in the surrounding RF environment.

SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Media conversion Signal repeating Lambda conversion 3R signal regeneration Re-transmission Re-shaping Re-timing Multi-rate supports 1Gbps ~ 10Gbps Supports Loopback Test Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10Gbps CPRI: 2/3/4/5/6/7 1G/10G Ethernet SDH STM-4/16/64 The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.

The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security