Diving Valve Test Bench

Zhejiang YOUJI Machinery Technology Co.,Ltd. Suitable for small diameter flange, welding type, internal and external thread forged steel valve pressure performance test, fully meet the requirements of gb/t13927-2008, jb/t9092-99, api598; Both jaws clamp and pressure tight type and sinks the test pieces into the water tank, the lifting function, and is especially suitable for gas pressure test, operation and use are convenient, The system is equipped with high and low pressure water pump pressure supply device; Pressure test medium is water and gas, which is selected by users; In the test of water or gas pressure in the process, the valve cavity has a higher pressure in the case of any one button does not work, has been pressure relief to the normal work; The machine is provided with a hydraulic automatic unloading system, when in use, high pressure and discharge charge state automatic switching, effectively reduce the oil temperature, prolong the service life of the equipment, saving energy and reducing consumption. Safety protection device with pressure test Can be set with computer testing data management system.

Zhejiang YOUJI Machinery Technology Co.,Ltd. valve test bench Jwt type welding type hydraulic valve testing bench, to both sides of the host frame seal disc and welding the inner hole of the valve for positioning and welding groove of the valve is sealed. By moving the machine frame to carry out experimental work of welding at both ends of the valve rupture plane clamping. Left to the frame and the sealing disc is fixed device, right to a moving frame to activities, were tested according to the distance of the valve is adjusted, valve to be tested without additional influence on the testing result of external force, and meets the requirements specified in the national standard of the valve is tested by. The structure of the machine can be divided for hydraulic system, mechanical structure, electrical control system. About a frame, a moving frame, hydraulic pressure supply device and medium circulation water system components. The workpiece pressing using mobile rack cylinder direct drive to achieve the reliable compression. Right to the mobile frame can be adjusted according to the tested valve length distance, and has good performance, simple structure etc.. The machine is equipped with a low pressure pump and high pressure hydraulic pressure supply pump device.

Reference Standards: TSGZF001-2006, GB-T12242-2005, GB-T12241-2005, GB-T12243-2005 Range of application: applicable for the set-pressure, setback pressure and sealing tests of direst loaded and pilot-operated safety valves. Technical Parameters: Maximum drift diameter: DN400mm Maximum test pressure: 60Mpa Pressure test precision: pressure gauge of 0.4 grades (Users can choose a more precise one.) Test medium: nitrogen, compressed air or clean water (Gas liquid dual-capable one can be designed.) Functions and Characteristics: The equipment has advanced design principle. It uses pneumo-hydraulic booster pump as its clamping pressure source and air driven gas booster pump as its test pressure source. A gas cylinder is equipped, which enables the test to be conducted continuously. â?¢The test pressure is adjustable and the process of pressurization is stable. â?¢Clamping pressure source and test pressure source can use imported booster pumps from America or Germany, which have a wide range of output pressure. â?¢All the manual high pressure valves, pipe fittings and connectors are imported ones, which guarantee their pressure levels, safety and reliability. Most gas and liquid media are available. MAQ-400 /48BA Functions and Characteristics: Maximum drift diameter: DN400mm Maximum test pressure: 48Mpa Pneumatic control hydraulic clamping device is adopted. Clamping force is adjustable. The equipped pressure gauge displays the corresponding clamping force and provides a comparison table between the pressure and the clamping force, which facilitates operators to choose appropriate lamping force according to the safety valve calibration pressure and the drift diameter. All the valves, pipe fittings and connectors are made of stainless steel. The test is operated manually and operators record the data. The system includes two test and calibration tables. One is equipped with two clamping devices. There are totally three clamping devices: one is for safety valves of DN15-DN100; one is for safety valves of DN100-DN200; one is for safety valves of DN200-DN400. â?¢Various test tools are equipped to meet the needs of customers on different kinds of safety valves.

Supplier: Valve test benches, valve testers

Supplier: Valve test bench, smart steam trap, steam valves
Services: Logistic
Buyer: Valves, steam traps,

Pressure Pulsation Test Bench Pressure pulsation test bench is used to determine the ability of a pressure vessel to withstand pressure, and as a means of determining fatigue failure and simulating the design life of a component. Pressure pulsation test bench is common in various industries such as automotive, shipbuilding, heavy duty, and aerospace. In a typical test procedure and setup, the pressure vessel is connected to an outlet that injects a fluid (e.g., water or oil) into the component using appropriate fixtures. In short, the pressure booster generates a sinusoidal or trapezoidal curve of pressure on the filled test sample. In many cases, various variables are added through the tempering medium or a climatic chamber is added to simulate environmental conditions throughout the pressure pulsation test. Suncenter has rich experience in the hose, tube, pipe, valve pressure test field, we can provide reliable performance air(gas) and Pressure pulsation test bench, leakage test equipment, pressure pulse test equipment according to the standard of (GB/T5568, GB7939, ISO6802, ISO6803, ISO8032, GB/T12722, gb16897, GB/T5563, GB/T10544 etc.), do the test to the hydraulic hose and hydraulic hose assembly, automobile brake pipe, power train pipes and other pressure parts for pressure performance test. Applicable range of air/hydraulic pressure test equipment: Automobile steering tube, brake pipe, air-conditioning pipe, oil pipe, water pipe cooling, radiator, heater hose, hydraulic equipment, condenser, evaporator, air conditioning filter hose, turbocharging system hose, car brake pump, a cylinder body, a project hydraulic hose, air hose and manifold, rigid pipe, joints, valves, pressure gauges, pressure vessel, pressure transmitter etc.

TEST BENCHES FOR VALVES Paskals designs, manufactures and delivers valve test units for pressure testing any type of Gate, Globe, Plug, Ball, Check, Safety and Butterfly valve according to all international test standards. Capabilities: Range DN10 2200 mm. / ¨ù - 86. Horizontal (stem vertical), vertical. (Stem horizontal) or tilting clamping system Clamping on the inlet flange, either flanges or (proportional clamping) between the clamping tables. 1 2000 tons of clamping force. With no or limited linear force on the valve body. Test pressure range: from vacuum up to 2000 bar / 30,000 PSI. Test medium: Liquid, compressed air, Nitrogen, Helium or Hydrogen. Standard Features: Computer registration system. Full automatic operation system. Testing one or a complete series of valves. Automatic open close action. Valve performance testing, considering; measuring of the stroke measuring, open/close time and torque measuring. Stainless tubing. Fugitive emission and cryogenic test facilities on requirement. Tests include: Shell test - pressure inside the assembled valve to 1.5 times working pressure. Back seat test - pressure inside with seat fully opened and closed to 1. 1 times working pressure. High pressure closure test -pressure applied to each side of the closed valve to 1. 1 times working pressure. Low pressure closure test - same as high pressure but with air at 100 psi (7 bar), detected by air bubbles in a water column or in laser bubble counter. Relief valve test - opening pressure using a ¡¯Pop¡¯ test and to 90-95% of set pressure.