Fog Nozzle with Ceramic Orifice and Anti-drip.
Thread Size: 3/16¿¬s, 10/24 and 12/24UNC, and 3/8",1/4.
Body Material: Brass or Brass Plated Nickel or Stainless Steel.
Orifice diameter: 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm.
The advantage of our Misting Nozzle with ceramic orifice is wear resistance and very longer using life better than stainless steel orifice.
100% quality inspection !! Nozzle orifices : 0.08mm ~ 1.20mm Threads : 10/24, 12/24, 1/8npt Materials : stainless steel, nickel plated brass, brass Flow rate : various choices. Customization available.( + / - 5% tolerance) Droplet size : 6 microns ~ 70 microns (depend on working pressure) Spray angle : 50 degree above
Fog jet nozzles produce a high volume of the fine mist through multiple small apertures. They produce full cone type pattern with large flow rates with aid of several flat jets spraying into one another. Applications: 1. Dust Control 2. Chemical processing 3. Fire Protection Customization of material and connections upon request.
A fog cannon uses highly pressurized water which is pumped through a series of jet nozzles, turning the water into mist through atomization. Applications: 1. Best used for fog cannon: Dust suppression/Humidifying/Cooling 2. Suitable for agricultural sprinkler irrigation of seedlings, flowers, vegetables, greenhouses, courtyards, balconies, gardens, campus greening etc. 3. Landscape fountain atomization, roof cooling Customization of material and connections upon request.
Nozzle body is made of brasss, with stainless steel nozzle core and stainless steel flow leading vane(include a leakproof device) inside. Under hydraulic pressure of 70kg/cmâ² to 120kg/cmâ², it flows with high speed and forms centrifugal volution in flow leading vane. Then it sprays tiny hollow spraying drop of around 50 um with teflon which can be widely applied in moisturization and man-made mist. Mesh, it introduced american driller for drill of spray hole, with hole diameter of 0.1mm to 0.15mm. Compared with air moisturization, it cuts cost by ten times.
Ultrasonic atomizer nozzles are a flow through design. Ultrasonic nozzles operate by converting high frequency sound waves into mechanical energy that is transferred into a liquid, creating standing waves. Liquid is pumped at the rear of the probe and travels down through the center until it reaches the vibrating tip. Once it reaches the tip portion of the nozzle, ultrasonic vibrations pulverize the liquid into ultra-fine particles for precise coating applications without the use of air pressure. Applications: 1. Dust Suppression 2. Humidification 3. Cooling 4. Odor control 5. Paper cutting 6. Cleaning 7. Thermal power plant 8. Chemical Plant 9. Crushing and screening buildings Customization of material and connections upon request.
Mist nozzle.
Spray nozzle Relab manufactures a full of spray nozzles in the worldwide, including flat nozzle, full cone nozzle, unijet nozzle, washing nozzle, plastic nozzle, mixing nozzle, etc.
Supplier: Mist nozzle, spray nozzle, high pressure nozzle, pressure mist nozzle, low pressure mist nozzle, fog nozzle
Material:metal (brass, stainless steel) Plastic(pp, pvdf, ppr, pvc, pps etc) Spray pattern: full/hollow cone, flat fan, solid stream Spray droplet:fine mist, fog, light rain, fine drizzle Application:cooling, cleaning, dust control, watering, landscaping, coating&painting, moisten, sterilization, surface treatment, fire control, add spice, adjust gas etc. Standard exporting carton.
