SENARCOM STRAIN VIEWER (REF.S-66/M)
(Fitted with Magnifier Lens)
200mm Diameter Field of View
The working space available on the Senarcom instrument allows a wide variety of products to be examined in polarized light.
Accurate assessment of stresses or strains in glass and plastics products is an essential requirement of the setting of standards for product manufacture and quality control.
The Sharples Senarcom Strain Viewer enables qualitative and quantitative assessments to be made of the stress and strain in transparent glass or plastic products. The stress or strain magnitudes in the component under examination can be accurately measured using the Senarmont method of compensation.
MAGNIFIER LENS
A magnifier lens of 1.5X can be swung into and out of the optical system to assist the operator when viewing small items.
SENARMONT METHOD
This stress/strain measuring technique is stepless in use and is therefore more user convenient than the application of standard strain discs. It is an objective method of strain measurement which will help to eliminate operator error in the assessment of strain magnitudes.
Illumination
Alternative sources of illumination are available with the Senarcom Strain Viewer. The instrument is supplied with white light for qualitative examination purposes and sodium monochromatic light for accurate quantitative measurements.
DATA:
Viewing Field: 200mm diameter
Base Dimensions: 240mm x 270mm
Total Height: 400mm
Space Height: 160mm
Light Sources: white light and sodium monochromatic light.
This Sharples Strain Viewer is already in worldwide use for the quality control of PET preforms. The advantages of our PET preform Strain Viewer are : - 1. Crystallinity is readily identified. 2. Not only can the molecular birefringent flow lines (fringes) be seen in colour but the black isoclinic lines are visible when the preform axis are parallel to the polarising axis of the viewer. The isoclinic lines indicate the directions of the molecular orientational strains. 3. A special and removable stage is provided to rapidly obtain the correct alignments of the preforms when viewing. For observations of the fringes the preforms are aligned at 45 degrees to the polarising axis and at 0 degrees to view the black isoclinics. The stage allows for the rotation of the preforms whilst viewing. Sodium light is also provided, in addition to white light, for the examination of coloured preforms or completed bottles. The lamphouse is fan cooled. Data: Viewing field:..............260 x 260mm Overall size:...............445 x 280 x 280mm Mains voltage:............220/240v or 110v.
Farm Machine Parts� series:� Tiller Blades, Mower Blades,� Disc Blades, S Tine Cultivator Parts, Gears etc. TEC GROUP INC. can supply the products for you according your drawing or samples. Farm Machine Parts series: Tiller Blades, Mower Blades, Disc Blades, S Tine Cultivator Parts, Gears etc. TEC GROUP INC. can supply the products for you according your drawing or samples. Produce equipment: melting furnace, centrifugal casting machines, coated sand casting machine, CNC machines, turning machines, grinding machines, milling machines, drilling machine, punching machines, laser carving machine Surface treatment: heat treatment, polishing, sand blasting, painting, electric-plating, chemical plating and other machine processing Inspection equipment:spectrum analysis instrument, metallurgical analysis, tensile strength tester, hardness tester, roughness tester, deflection tester, impact test machine, projector, altimeter, scale micrometer, pressure tester, etc. We have more than 20 years experience, and we have advanced production technology and efficient management system. So we can supply our customer high quality products with competitive price.
9TORCâ??s Torque Multipliers provides extra mechanical advantages needed to tighten or loosen stubborn nuts and bolts locate cramped or (in accessible) positions. A manual Tool, particularly recommended where no compressed air/electric power available for use of Power Tools. Overall, Torque Multipliers are the ones used for tightening and loosening heavy duty bolting connections. It reduces a lot of physical effort and act as a crucial support to apply torque more accurately.
1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
TOPO REF KERATOMETER Tomey Model RT-7000, NEW! * 3 systems in one device * Automatic alignment and triggering * Color touch screen * Various topography views * Electronically controlled chin rest * Joystick orientation * Pupil and corneal-measurement Refractive Power Measurement Spherical Refractive Power (S) Measurement Range -25.00 D to +22.00 D (at VD = 12.0 mm) Display Unit 0.01 D / 0.12 D / 0.25 D Cylindrical Refractive Power (C) Measurement Range 0 D to �± 10.00 D (at VD = 12.0 mm) Display Unit 0.01 D / 0.12 D / 0.25 D Astigmatism Axial (A) Measurement Range 0 �° to 180 �° Display Unit 1 �° Minimum Pupil Diameter �? 2.2mm Vertex Distance 0mm / 12.0mm / 13.5mm / 14.0mm / 15.5mm / 16.0mm Measurement Time 0.2 seconds / single eye Corneal Curvature Measurement Corneal Curvature (K1, K2, AVG) Measurement Range 5.00 mm to 11.00 mm Display Unit 0.01 mm Corneal Refractive Power (K1, K2, AVG) Measurement Range 30.68 D to 67.50 D (n = 1.3375) Display Unit 0.01 D Corneal Astigmatism (CYL) Measurement Range 0 D to 10 D (n = 1.3375) Display Unit 0.01 D Axis Of Corneal Astigmatism (AXS) Measurement Range 0 �° to 180 �° Display Unit 1 �° Measurement Area Cornea �? 3.0 mm (at 8.00 mm corneal curvature) Measurement Time 0.1 seconds / single eye Measurement Of Corneal Shape Display Range 9 D to 100 D
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
Sulzer rnd 76 m Piston ring new70 pieces Telescopic pipe 6 pieces Air valve plate 50 packet Spil valve 20 pieces Crank pin bearing 7 pair Liner o ring 50 pieces Telescopic pipe guide 20 pieces
Features: Provide high definition image of observation specimen . Upright binocular head Diopter adjustment of range f+5mm. The inter-pupillary distance adjustable between 55-75mm. Slide-in objective. Built-illumination system as 230V/10W (12V/10W tungsten bulb)(CE and GS approved )or 115V/10W(12V/10W tungsten bulb ) If you equipped gem clamp and dark filed with 2L type stand ,then it can be used as a jewelry microscope. 42cmX35cmX52cm
