The new mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.
You read and program eeprom of cpu from steering blocking module via diagnostic connector.
Desolder and read via programmer two cpu from electronic ignition control module.
Load theese eeproms to program.
Desolder nec cpu from the key.
Soldering it on the device , select the no of key and program it.
Solder all cpu on their places and start the car.
You can program new keys without the car - only with eis and steering blocking module.
You can read theese cpu with help etl programmer for motorolla cpu 68hc705x16(32).
Supplier: Tacho v2008, BMW ops, GT1PSA XS evolution, renault can clip interface, digimaster ii , MB key prog, t-300 v7.2, hitag-2 key tool, super ak-400, bmw cas3 programmer, super r250s programmer, elm327 com, elm327 usb, op-com v2008, x431 infinite tool , launch x-431 diagun, x431 can-bus ii connector , x-431 heavy duty, launch x431 super scanner, vag com 812, vag com 704.Etc.
Supplier: Auto diagnostic products, bmw gt1, mb star, sss, inpa, ad-1 auto scanner, obd ii ad-100, vagcom 704, ops, renault can clip diagnostic interface, peugeot planet, ford vcm, vas 5052a, piwis cable, tech 2, car key program t300
Supplier: BMW GT1, Ford VCM ids, Volvo vida dice, autobos V30, AK400, SBB, BMW OPS, MB star2008, MVP key programmer, Honda GNA600, GM tech-2, X431 super scanner, X431 top, X431 infinite.
VVDI BE Key Pro Improved Version and For Benz Smart Key Shell 3 4 Button XNBZ01EN for VVDI MB Tool. Features: More compatibility New design High Stability High reliability Xhorse BE smart key: Frequency changeable Reusable - you can reset it Workable with Autel IM608, CGDI and VVDI MB, Key Tool Plus Can use Xhorse Mercedes smart key 3 button on 2 button key and it worked lock/unlock/ trunk Just on non keyless go VVDI BE Key Update Features: 1. Fix the bug that W164/W639 EIS data doesn't synchronize the key. 2. Fix the bug that the BE key fails to turn on the ignition after repeat try. 3. Fix the bug of trunk remote open. 4. Fix the bug that the BE key only transmitted RF signal for one time, after update, the RF signal can be transmitted for two times when press and release the key. 5. Modify the rolling algorithm, fix some errors of BE key. 6. Add pre-roll algorithm: the HASH value can roll ahead. 7. Adopt car-grade quartz crystal, improve infrared communication stability. 8. Boost the infrared signal when you press the button. 9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor. Tip: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won't work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor. The ways to reset the frequency: 1) with the PCB SMD resistor. Weld the 1K SMD resistor on the position the arrow points and the frequency is 315MHZ, after remove it will be 433.92MHZ. 2) Change frequency between 315MHz and 433MHz with VVDI MB Tool.
