Introduction:
The production line of washing, oven, filling and sealing machine for ampoule is specially designed to produce liquid injection according with GMP Standard. It consists of ACQ Type Vertical Automatic Ultrasonic Bottle Washing Machine, Model GMS Tunnel-type Oven, Model AGF Wire-Drawing, Filling and Sealing Machine. Equipped with advanced instruments at home and abroad, it features advanced system of control, steady operation, low noise, convenient maintenance with low cost. It is applicable for producing the ampoules of 1-20ml. The number of needles of filling and sealing machine can be adjustable, and each machine departing from the production line can also be singly used. Whole productive process is under the protection of 100 stage laminar flow protection device, and the production quality is according with GMP Standard.
Capacity:
1ml
11500Bottles/h
2ml
11500Bottles/h
5ml
10000Bottles/h
10ml
8000Bottles/h
20ml
5000Bottles/h
Working Principle:
Put the tray full of ampoules into inner tray of ACQ Type Vertical Automatic Ultrasonic Bottle Washing Machine, ampoules will be sent into water-poure case via screw path for ultrasonic washing. Then ampoules are raised by vertical rotary screw pole, clamped by a row of clamps, overturned to bottom up and sent into round-barrel 3-water-3-air washing case. Then ampoules are washed by filtering water, pure water, water for injection seperately and blowed by pure air after each time washing. Finally ampoules are overturned bottom down and sent into oven orderly for next step.
Under the monitoring of intelligent system of Model GMS Tunnel-type Oven, ampoules are successively entered the Preheating Zone, High Temperature Sterilizing and Drying Zone and Cooling Zone of the Oven by conveyer chain with speed stepless adjustable. The temperature control system has functions of temperature setting, displaying, recording and printing. In order to avoid pollution, the 100 stage laminar flow protection devices are supplied in the inlet section and outlet section of the oven(option). After cooling, drying for no bacterum, and throwing off the heat source, ampoules are taken out automatically for next step.
Ampoules in bulk are fed into the bottle-feeding passageway of Model AGF Wire-drawing Filling and Sealing Machine by the conveyer belt. The ampoules in group are intermittently and orderly fed into the stations of nitrogen filling, wire-drawing, filling and sealing under the protection of 100 stage laminar flow protection device (option). Sealed ampoules are intermittently pushed out of the bottle funnel by a bottle-pusher.
Chracteristics:
The whole system is always under the protection of 100 stage laminar flow protection device and according with G.M.P Standard.
Equipped with advanced instruments and sensitive control system at home and abroad to guarantee the stable performance an convenient operation. Water used for bottle-washing can be recycled to save water consumption.
Applicable for various ampoules specification.
The bottle washing machine adopts PLC control and human interface control for bottle washing process, and ultrasonic-washing time can be set freely.
The temperature control system of oven has a function of paper recording or non-paper recording.
The speed of vonveyer belt in oven is stepless adjustable and satisfying various output requirements.
In the wire-drawing, filling and sealing machine , equipped with device to ensure no bottle-no filling.
In the wire-drawing , filling and sealing machine, liquid gas plus oxyen or industrial acetylene plus oxygen is adopted as buring gas with high capacity.
In the wire-drawing, filling and sealing machine, primacy tiny-adjustment is adopted for filling with less error
The whole line features convenient assembly, compact and rational configurations, small footprint.
The whole line features beatiful appearance, practicality,convenient maintnance with low cost.
This whole line is totally automatical without pollution of manual pollution.
Sea worthy export standard pack.
The Automatic Ampoule Filling Sealing Machine is suitable for performance-demanding customers in pharmaceutical, biotech, veterinary, cosmetic, & other industries. The machine is compact in design and complies as per CGMP requirements. The machine is built on the principle of slant travel of ampoules while filling & sealing to take care of the of the wide variation of ampoule neck dimensions, thicknesses, and ovalities. The unit is built on a stainless steel square pipe frame & totally encompassed with stainless steel coverings in a pleasing matte finish. Large openings are available on the bottom side of the machine for absolute cleaning. The pendant-type electrical control panel is lifted from the machine for ease of operation and safety. Technical Specification Model LI-AFS 1 No. of Heads Single Ampoule Handling Range 1ml to 20ml Production Output Up to 1800 ampoules/hour Filling Accuracy ± 1% Require Gas for Sealing LPG & Oxygen (O) Nitrogen Flushing Pre & Post Nitrogen Flushing Available Power Specification 0.5 H.P. Electrical Characteristics 220 Volts, Single Phase, 50/60 Hertz Contact Parts Made from Stainless Steel 316L Non-Contact Parts Made from Stainless Steel 304 Overall Dimension 915mm (L) x 610mm (W) x 965mm (H) Net Weight 100 kgs. approx. Gross Weight 190 kgs. approx.
High vacuum sealing packaging machine high temperature sterilization food sealing machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. After vacuum packaging, it can effectively keep fresh, guarantee quality, moistureproof, clean and clean all kinds of rice cakes, bean products, meat products, aquatic products, agricultural products, pickles, fast food products, prepared foods, powders, spices, electronics, hardware parts and drugs It can prevent mildew, rust, pollution, oxidation and vacuum sterilization, so as to prolong the shelf life. welcome order ! small type ,big type ,single chamber ,2-chamber ,rolling vacuum sealing packing machine ....!
Brief instruction Binary filling is the process of filling compressed air or nitrogen into the can, sealing the valve with a pouch, filling the raw material in the inner pouch of the can, completely isolating the raw material from the can body, and using the propellant with compressed air (purification) to replace propane butane liquefied gas, dimethyl ether, etc., thereby solving the trouble caused by the leakage of the raw material corroding the can. When the valve is opened, the compressed air in the tank presses the pouch to push the raw materials out of the tank. After the raw materials are completely squeezed out, the compressed air in the tank remains in the can, so the filling can be repeated. This can be changed by changing the valve actuator. This equipment has been widely used in medicine, sanitation, fire fighting, daily chemical industries, such as: cosmetic sprays, household fire extinguishing agents, computer cleaning agents, shaving foam, etc. The machine has fast speed, accurate filling quantity, good air tightness of sealing, and the inflation pressure can be adjusted to the required pressure at will. This machine assembles a sealing cylinder, a forced filling head and a filling cylinder, and the control part is controlled by a PLC controller. The sealing cylinder and the filling cylinder are controlled by several double air control directional valves. We design the whole machine on a workbench, which is safe and reliable, easy to maintain and operate. Feature 1. The material contacted with liquid made of SS316L 2. The device operation interface can be programmed. 3. Equipment automatic initial pressure value display system 4. The operation action and speed can be set freely through the program 5. Control the induction system, set the can to reach the designated position before starting, safe and reliable, and also ensure the safety of the operator. 6. When the pressure value is insufficient, the device automatically stops, and the pressure automatically starts again after the pressure reaches the specified value. Achieve quality control safety in detail. 7. The safe setting of the initial pressure value, the initial pressure value of the equipment does not reach the specified pressure, and is not sealed and inflated. Reduce defective products, reduce waste of packaging materials, and improve quality control rate.
Supplier: Provide various pharmaceutical machinery, such as mixer, granulator, tablet press, granulator, capsule filling machine, sugar coating machine, drying equipment, packaging machine, ampoule filling and sealing machine, pulverizer and chemical machinery
Yk160 oscillating granulator This machine is used for forming the required granules from moist power material, or for crushing dried block stock into granules in required size. Its main features are: the sieve can be removed and remounted easily; its tension is also adjustable. The rotor also can be removed and cleaned conveniently. The driving mechanism is totally enclosed in the machine body and its lubrication system makes the machine work smoothly.
Characteristics: The travel adopts imported loose piece drive. It has small machine size and regular appearance and it adopts 220v household power supply. One tablet each time for easy replacement of mould plate, novel mould with low-cost. Usage of uniting aluminum-plastic and Al-Al blister as one Usage: This machine is suitable for being used in hospitals and pharmaceutical factories. Adopting�+the function of two-in one ,aluminum-plastic blister machine and Al-Al blister machine are suitable for blister packing of drugs, food and health products, etc. so as to promote product grade, improve product quality and appearance effect.
B series universal pulverizer The machine is widely used in many fields, such as medicine, chemical industry agricultural chemicals, viands and foodstuffs. This machine trough the high-speed relative motion of movable fluted disc and fixed fluted disc, are pulverized by the multiple actions of collision, cutting, friction of teeth and the mutual collision of materials themselves. The machine is simple and sold in structure, and steady in motion with a good result of pulverizing. The pulverized materials is ejected out of the chamber of the main frame, the different fineness of pulverized products can be attained by changing screen meshes of different apertures.
It is applicable to fill and seal plastic cups, bowls, boxes used to be filled with liquid or cream materials, such as jelly, ice-cream, jam, yogurt, beverage, mineral water and so on. It is full automatic processing of cup-falling, filling and sealing. With photoelectric device, it assures that the film can be sealed accurately the mouth of the container. There are many models in the series to meet with the containers of the different shapes and contents. We can add the function of filling solid particles such as fruit flesh, and date-printing device according to clients demand. The machine can be used the imported components and plc system according to clients demand. Technical data: Packaging speed: 3600-4500 pieces/h Film width: 320mm Filling content: 150-400ml Power:3-phase 4-line socket(380v50hz) Electric machinery power: 0.75kw Heat up power: 4kw Air pressure: 0.5mpa-0.7mpa Maximum air consumption:0.45m3/min Outline dimension: 3500*800*1700(lxwxh) Timing mode: stepless speed regulating Gross weight: approx 1200kg