Laser Tube(80W)

1. Main Features: 1) Good compatibility: It can be applicable to 80W laser tube. 2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7mAAC220V Input :0.4mA(AC110V Input) Output: Maximum Input Voltage: DC 40KV Maximum Output Current: DC 28mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40 Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=280*173*97(mm) COLOUR : YELLOW , BLACK 3.5kg to be boxed.

Catalytic co2 laser tube 1200*80 80w 9months 1400*80 100w 9months 1600*80 150w 9months Improved co2 laser tube 1600*60 80w 3months 1600*80 100w 6months Traditionalco2 laser tube 1200*60 60w 3months 1250*60 60w 3months

Sealed co2 laser tube Laser power 60w /80w/120w/130w/150w Engraving area 1300 x900mm Whole machine size 1 trol system. Compatible software coreldraw autocad photoshop Accessories optionalred-light, pointer, up-and-down platform, water-chiller, muti-head.

This type machine is a kind of laser engraving machine system equipped with Co2 laser tube,it is used to engrave on acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials . Cutting, engraving and punching soft materials, such as all sorts of clothing, leather, carpet, suede fabric, denim jeans, stuffed toys, textiles, industrial fabrics etc.

orignal Reci laser tube

Product name:laser engraving laser tube power:80w/100w/130w/150w Driving system:Stepper Motor Max lower:About 1 kw Machine control:DSP controlling Laser power:AC 110-220V,50-60HZ cutting speed:0-600mm/s Software:laser works Warranty:2 years certification:CE FDA

BR-60W CO2 POWER SUPPLIES Feature 1.Both analog signals of 0 to 5V and PWM signals are used� to control and regulate this AC110V CO2 power supplyâ??s output laser power. 2.This AC110V CO2 power supply� can adopts� ether external LCD digital display module by network cable,which can show� HV carbon dioxid power supplyâ??s working current,working statues and failure code.�  It is very good function for both machine factory and machine users 3.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block� to input� laser control signal and black� steel case. 4.This LCD screen CO2� power supply� has� high efficiency and� quick� response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube.�  5.This 60W CO2� laser power supply� terminal control is simple and adapted to high and low level signals. TTL 1level can be used to control the start and stop of laser� power. At the same time, an abnormal protection switch was added to detect if� the external water is ventilated or not. 6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japanâ??s bearing and make the fan works for very long time. 6.This HV carbon dioxide� power supply� has good grounding protection5.With advanced open circuit protection, the� 60W CO2 power supply� can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply� caused by the bursting of the laser tube. Specification lnput�  Input voltage AC220V�±10%� (AC110V specified while order) AC frequency 47~440HZ Maximum input power 490W Maximum input current 2.2A Output Maximum output voltage 25KV Maximum output current 28mA (depending� on the laser tubes of different manufacturers) Efficiency More than 90%� (Full load) Response speed Not more than 1ms Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) Insulation lnput-output AC 1500V 1 minutes not more than 10mA lnput-shell AC 1500V 1 minutes not more than10mA Output-shell Connection Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) Environmental Requested Working temperature -10â??~50â?? Storage of temperature -20â??~75â?? Relative Humidity Maximum 85%RH (non-condensing) Altitude 100,000 feet of work 200,000 feet of storage,dose not work Cooling methods Forced air cooling (fan cooling) Dimensions (LxWxH) 210mmx145mmx102mm

Working area--------------600*400mm Machine color--------------Blue white Laser tube power---------80w-100w Laser tube life------------10000 hours life, 10 months warranty for RECI tube Laser type----------Sealed CO2 glass laser tube Machine control ---------------DSP controlling (Ruida) Driving system---------------YAKO drivers Working platform--------------Honeycomb table or knives table with funnel Cooling method----------------Water cooling Lase Engraving speed---------0-1000mm/s Cutting speed--------------0-600mm/s Resetting positioning accuracy-----------

Model rl6090hs Standard laser power 60w Optional laser power 80w Laser tube co2 laser tube Engraving area 600íß900mm Maximum height of materials to engrave 550mm up and down adjustable by motor Gross power 1000w Software conversion output: artcut, photoshop Main graphic format supported: plt/dxf/bmp/ai Direct output: coreldraw, autocad, lasercut Engraver for format supported: Rotary clamp is optional and used to engrave on curve surfaces Cutting ability 80w laser tube acryllic max 20mm Engraving speed max 1000mm/s Power supply 220vía10% 50hz 110vía10% 50hz Cooling system water cooling Optional spare partsrotary clamp: used to engrave on curve surfaces Water chiller Machine size 1480íß980íß1100mm Packing size 1770íß1220íß1290mm