Alloy Pipe

Carbon seamless pipes are widest uesd.If you need .Pls send e-mail to me. O.D:17-470mm Wt:1-77mm

Size : Upto 24 NB. (Seamless & Welded) Grade : Alloys 20, NICKEL, Monal, Inconal Hastalloys & Titanium. Type : Round, Square, Rectangular. Welded : Upto 24 NB Seamless : Upto 24 NB Make : Msl/Ismt And Imported Origin..

Alloy Pipes Specification: ASTM A335 is a ASTM standard specifies Seamless Ferritic Alloy Steel Pipe for High-Temperature Service. ASTM A335 pipe ordered to this specification shall be suitable for bending and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics. Steel Grade: ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91 | GR P92. Size (mm): O.D.: 51-508; W.T.:7~60; L: max 12000 and other specifications in accordance with customer requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting,Epoxy & Fbe Coating Painting as requested. Mechanical Properties: Standard Steel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) Impact Energy(J) Rigidity ASME SA335 SA335 P11 =415 =205 =22 =35 =163HB SA335 P12 =415 =220 =22 =35 =163HB SA335 P22 =415 =205 =22 =35 =163HB SA335 P5 =415 =205 =22 =35 =187HB SA335 P91 585~760 =415 =20 =35 =250HB SA335 P92 =620 =440 =20 =35 =250HB Grade and Chemical Composition (%) Grade C Mn P, S, max Si Cr Mo P11 0.05-0.15 0.30-0.60 0.025 0.50-1.00 1.00-1.50 0.44-0.65 P22 0.05-0.15 0.30-0.60 0.025 0.50 max 1.90-2.60 0.87-1.13 P5 0.15 max 0.30-0.60 0.025 0.50 max 4.00-6.00 0.45-0.65 P9 0.15 max 0.30-0.60 0.025 0.25-1.00 8.00-10.00 0.90-1.10 P91 0.08-0.12 0.30-0.60 0.020/0.010 0.20-0.50 8.00-9.50 0.85-1.05 V 0.18-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.06-0.10 Ti 0.01 max P92 0.07-0.13 0.30-0.60 0.020/0.010 0.50 max 8.50-9.50 0.30-0.60 V 0.15-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.04-0.09 W 1.50-2.00 B 0.001-0.006 Ti 0.01 max Zr 0.01 max Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish

ASTM/ASME Standard Alloy Pipes Specification: ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified.

ASTM/ASME Standard Alloy Pipes Specification: ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (') indicates an editorial change since the last revision or reapproval. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Mechanical properties: Steel Grade Tensile StrengthN/mm2(min) Yield StrengthN/mm2(min) Elongation % (min) TP304 515 205 35 TP304L 485 170 35 TP316 515 205 35 TP316L 485 170 35 TP321 515 205 35 T11 =415 =205 30 T12 =415 =220 --- T13 =415 =205 30 Chemical Composition(%, max) Steel Grade C Si Mn Cr Ni Mo S P TP304 0,08 0,75 2 18 - 20 8 - 11 - 0,03 0,04 TP304L 0,035 0,75 2 18 - 20 8 - 13 - 0,03 0,04 TP316 0,08 0,75 2 16 - 18 11 - 14 2 - 3 0,03 0,04 TP316L 0,035 0,75 2 16 - 18 10 - 15 2 - 3 0,03 0,04 TP321 0,08 0,75 2 17 - 20 9 - 13 - 0,03 0,04 T11 0.05-0.15 0.50-1.00 0.30-0.60 0.5-1.0 --- 1.0-1.5 =0.25 =0.025 T12 0.05-0.15 =0.50 0.30-0.61 0.80-1.25 --- 0.44-0.65 =0.25 =0.025 T13 0.05-0.15 =0.50 0.30-0.60 1.90-2.60 --- 0.87-1.13 =0.25 =0.025 Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish

Alloy Pipes GB/T8162 GB/T8163 GB3087 GB6479 GB9948 GB5310 GB/T17396 20G, 20MnG, 25MnG, 15MoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material