Spray Paint Booth

GuangLi Spray Booth --Wall panel: sandwich style, δ=50mm, polystyrene. rock wool available as required. --Basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional. --Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. --Ramp: 2 pcs of vein board.--One 7.5kw intake fan and one 5.5kw exhaust fan. --4m straight exhaust ducts, one 90° bend, and one 60° bend.5m straight chimney and 2 small bends. --Spraying/baking transition damper, automatically air controlled. --Heat exchanger: stainless steel. Riello G20 burner. --Roof filter: 4 pcs of filter, mounted above support frame,which is made of steel and powder coated. --2 pcs of floor filter and 1 pcs of outlet filter.--Upper light: 10 sets, 4*40w per set. side lights: 8sets,2*40w. --Control box: components is import, overload, overheat, phase-lacking protection, straight driven motor. --Automatically stop when preset time is up.Constant temperature spraying. --Environmental filter: the equipment can be adopted M style activated carbon or drawer style activated carbon as optional. Technical Specifications External size(m) 7.0x5.3x3.5 Internal size(m) 6.9x3.9x2.7 Door width (m) 3.0 Door height (m) 2.66 Air flow (m3/h) 24000 Inside on-load air speed(m/s) 0.3-0.35 Power (kw) 16 Vehicle suited Saloon car

A spray booth is a specially designed enclosure used to house spray equipment and isolate expelled vapor that is generated during a spray application process. Spray processes are used to apply corrosion preventative coatings to a metallic surface. Spray booths are typically intrinsically safe and built to be fire and explosion proof. Common spray booths are: Car, truck, train paint booth Telescopic spray booth Industrial paint booth Furniture spray booth Water curtain spray room Dry spray booth

--Wall panel: sandwich style, δ=50mm, polystyrene .rock wool is optional. --Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. --Exhaust fan: 1 unit of 5.5kw unilatcral centrifugal fan. --Exhaust duct: 3m straight ducts, one 90° bend, and one 60° bend. --Filtration: mounted at the rear wall panel. --Roof filter: 2 pcs of filter, mounted above support frame, which is made of steel and powder coated. --Upper light: 8 sets, 4*40w per set. --Control box: components made in china, overload, overheat, phase-lacking protection, straight driven motor. --Omni- directional movable infrared light as optional. Technical Specifications External size(m) 8.1x4.0x3.2 Internal size(m) 6.9x3.9x2.7 Door width (m) 3.0 Door height (m) 2.66 Air flow (m3/h) 18000 Inside on-load air speed(m/s) 0.25-0.3 Power (kw) 7 Vehicle suited Saloon car

D with 03.7mm thickened galvanized sheets. There are three rolls of steel grills in the size of 3*40. The operate plate on both sides are covered with anti-skid plates. Fan 3kw3 setsthe helicoids centrifugal fan is special designed for paint spry booth. Volume of each set:15000m3/h Advantages: low noise, explosion proof, etc. 24. We use the inclined tube lighting to make sure that the lights can reach every part of the booth. Ceiling girder6900*39001 set the framework is welded by square pipes (80*40mm) for supporting. The reinforcement is made of galvanized sheet (thickness of the sheet is 0.7mm). All those can ensure the solidity. Heating cfr engine1 setwe use liyalu 14#cfr engine with the oil consumption of 7l-10l. The heat exchanger is welded of stainless steel sheets (thickness 1.2mm) and the heat exchange rate can reach more than 95%. The intake wind door is electrical door. Skirt 7000*4000*300(length*width*height)1 setthe skirt is welded by 0.7mm thick galvanized sheet with snow patterns on it. Doors for operators1800*700(height* width)1 setthe edges of the door are wrapped with aluminum alloy. There are windows for operators to observe in the door, too. Others Size: 7000mm*5200mm*3200mm

Supplier: Spray booth, automotive spray booth, paint booths
Services: Design, manufacture, installation

Supplier: Electrostatic powder coating oven, powder coating plant, powder coating oven, spray paint booth, oven, wet painting line, ED painting line

Supplier: Spray gun, spray booth, paint shop, automation, paint kitchen system, paint circulation system
Buyer:

Supplier: Paint spray booth

Supplier: Spray booth, painting booth, baking booth, mixing room, prep station
Services: OEM service