This machine is specially designed and controlled by check-weight system from METTLER TOLEDO to better control accuracy, suitable filling liquid product to high-viscosity product, and it is commonly used to fill 200L drums manually.
Specification:
1). Product : From liquid to high-viscosity (200 L mental drum)
2). Output Speed : 0-60containers per hour (Depend on actual size of drum 200L and operator speed))
3). Container Shape : Round IBC Tank, pail, drum or others
4). Drum Material : Plastic container or mental container
5). Drum size : Standard 200L (On requests)
6). Voltage supply : 415/220, 1/3Phase, 50/60Hz;
7). Filling accuracy : Class X(0.5) (0.2%);
8) Filling mode : Above or under liquid level.
Strong wooden crate.
Compose of cip sprayer of liquid level control and vacuum device. - bottles loading & discharge The timing screw assures separate spacing. The bottles infeed and discharge through star wheels. The timing screw can be regulate to match thebottle diameter size. The star wheel is easy to be assembled and adjusted for correct positioning. - filling valve of cip device Not need to dismantle filling valve of cip device, have perfect cip action, which will enable filling valve to wash clean
- up-slide of filling device The up-slide of filling device can stability for cans during high speed operation, and do not easy get foam for production. Filling valve is equipped with cip function and is easy to cleaning. - filling barrel The filling barrel is infeed from down side and co2. , air from up side to separte control entering co2, and air discharge, filling barrel adjust up or down level that can turn the screw shaft of barrel cap. Made of sus 304 stainless steel plate and with cip device and is easy to cleaning. - electro-pneumatic latch A electro-pneumatic latch has a no bottle no fill mechanism, to ensure highly efficient positive follow-up operation. - bottle stop device & infeed timing screw Made of mc nylon, noise is minimized during high-speed operation and bottles are protected from breakage and well stabilized. - co2 & air adjustment control disc Adjust pressure by required, easy operation and operate on control disc.
- larage capacity 60 overflow-filling valves, 15 capping heads can handle filling 600cc-400bpm. - touch type control -status block system Can be operate control systems of this machine and each peripheral equipment, and display operating status of each control system on the liquid crystal display monitor. - selection & cap selector-blower It design to use air transfer system for automatic continous transfer cap to screw-capper. Whole kind of cap can use this device. - bottle-mouth centering bell device It can support and ensure filling bottle that the bottle-mouth can correct aim on filler. It hold bottle more stability and reduce the bottle-mouth and filler interfere resulted in spare parts consumption. - bottle loading & discharge Bottle loading & discharge through star wheels secure the stable and accurate movement. The timing screw is able to be regulated to match bottle diameter size. The star wheel is easy to be assembled and adjusted for the fixed time & position. - sealsing heads After the aluminium closure has been laid on top of each bottle by means of aluminium closure selector, the automatic capper will then lower down tightening up the aluminium closures together with its inner by using pressure block.Then, the pilferproof locking bank will be locked up by driving the pilferproof roller completely down to have the sealing operation come to and end. - back-flow tank & cip system Be exhausting the air of bottle and extrhcting over-filling fluid to bst(backflow tank), then pumping the liquid from bst back to pre-process tank for re-process. - air-beverage separating type overflow filler Made of stainless steel and sanitary material. All kinds of dirt are easily to accumulate in thread or spring, it does not adapt any parts of this hike. This filler can be disinfected thoroughly and then meet the standard of food sanitation.
The machine is suitable for folding and gluing all kinds of paperboards, easy to operate, neední»t operating experience.The order can be changed quickly in one minute.The min.Width and height size is 260mm.It is the best choice for carton making factory. Wooden box
PLC Photo-eye auto-height sensing pallet height Separate top ,bottom & up-down Wrap Counter Selector Overwrap time is set to create an overwrap Reinforce wrap times is set to better secure 2 loads placed on top of each other Film Tension Control adjustment on the panel Separate start, pause and emergency stop buttons Power indicator Manual carriage up/down Variable Turntable Speed Carriage up/down speed control Manual/automatic exchangeable Turntable 1650mm diameter structural steel plate 85mm height floor to top of turntable Turntable drive 0-12rpm variable turntable speed by frequency changer position turntable alignment soft start Film carriage powered pre-stretch system up to 200% to min film consumption carriage door opens for effortless roll change and thread film film delivery variable speed by separate dc drive motor electronic film tension control adjustment on panel film dancer-bar with variable speed output Film carriage drive heavy duty double-chain carriage lift, calm and safety film carriage variable speed by frequency changer Option ramp top plate auto film attach and cut off system packing height:1800, 2400mm turntable diameter: 1800mm, 2000mm Packing height(max) 1800mm Packing efficency 20-40loads/hour Turntable speed 0-12rpm Turntable diameter dia.1650mm height85mm Turntable loading(max) 2000kg Machine weight 700kg Machine dimension 2545mm1650mm2270mm Power/voltage 0.75k ac220v Wooden or iron case
Large capacity With 50 rinshing heads, 40 overflow-filling valves, 15 capping heads, can handle hot filling 500c.C bottle at speed up the 420 bpm.
- external filling barrel Filling tank, which is separate, is placed outside of the machine. The product through the buffer tank of machine flow to filling valve and then filled into the container. It could increase the filling stability, and external filling barrel are easily washed. - star wheel & guard device Bottles are transferred from filler to capper by the bottle neck-ring hanging type star wheel & guard device. Then transferred to discharge convey or by the stirrup-cam type star wheel & guard device. - electromagnetic type volumetric filling valves Filling valve, which is adopting electromagnetic type, reacts to the flow then the filling valve closing. It could reach the volume exactly and has a no bottle no fill mechanism.
Appearance material304 stainless steel Air pressure range0.3-0.6MPa Sealing height: 30-180mm Bottle diameter35-150mm Sealing speed400-600pcs/hour N.W.350kg Power220V/50Hz 1.1KW Appearance Size1050*800*1630mm Number of cans1 FunctionVacuum nitrogen filling and sealing
Features and purpose: This machine is suitable for folding and gluing all kinds of paperboards, easy to operate, neednf+t operating experience. The order can be changed quickly in one minute. The Min. width and height size is 260mm. It is the best choice for carton making factory. Main structure of machine: This machine compose of main frame and two small conveyer frame. Main component: frame, lift and down working table. Forepart feeding section, forepart proofread section, middle transportation section, middle pressing section, finished carton side-delivery section, electric control system. Supply gluer head adopt special alloy material, anti-acidity and anti-alkalescency for keeping a long life of the gluer head.
