Featured Glass

TRANSPARENT GAUGE GLASS These work on the principle of difference in reflective indices of liquid in the tank and possible presence of gas with the liquid. The liquid will be black display while the gas or vapor will be white display. These level gauges have glass etched with reflecting prisms at inner surface. This surface reflect the light falling on the surface and enable detection of surface of even colourless liquids. Operating Principal: The Principall of the Transparent Guage Glass is based on the difference in the refractive indices of liquid and gas or in particular of water and steam. It has prismatic right angled grooves,on the side facing media.if a ray of light encounters the surface of one of the 450C slanted grooves in the gas or steam space it is reflected to the opposite surface of the groov and from there totally refiected back into the direction of observation The steam or gas space therefore appears as silver - white The light ray which encounters the surface of a groove in the liquied space is almost totally absorbed.The liquid behind the reflex glass therefore apperars black. Light rays entering from outside the gauge are either absorbed or reflected depending opon whether they enter the water or steam space (Serveral sizes are available in both Transparent Gauge Glass & Reflex Gauge Glass) Features of Transparent Gauge Glass Industry specific highest quality gauges Optimal performance High reliability Accurate readings Temperature ratings from -425oF to 750oF Not influenced by chemical or electrical properties of the process liquid Simple to install Easy to interchange during installation Applications of Transparent Gauge Glass Mica Blocks Level detection within a specific vessel Pharmaceutical industry

These work on the principle of difference in reflective indices of liquid in the tank and possible presence of gas with the liquid. The liquid will be black display while the gas or vapor will be white display. These level gauges have glass etched with reflecting prisms at inner surface. This surface reflect the light falling on the surface and enable detection of surface of even colourless liquids. Operating Principal: The Principall of the Reflex Gauge Glass is based on the difference in the refractive indices of liquid and gas or in particular of water and steam. It has prismatic right angled grooves,on the side facing media.if a ray of light encounters the surface of one of the 450C slanted grooves in the gas or steam space it is reflected to the opposite surface of the groov and from there totally refiected back into the direction of observation The steam or gas space therefore appears as silver - white The light ray which encounters the surface of a groove in the liquied space is almost totally absorbed.The liquid behind the reflex glass therefore apperars black. Light rays entering from outside the gauge are either absorbed or reflected depending opon whether they enter the water or steam space (Serveral sizes are available in both Transparent Gauge Glass & Reflex Gauge Glass Features of Reflex Gauge Glass Reflex type glass indicator Simple design Designed for high pressure and temperature Used for clear liquids and gas level indication Applications of Reflex Gauge Glass This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks

Horizon glass washng machine information: Unit weight:1000kg. Glass thickness:2-19mm. Min glass size:250*250mm. Max processing glass with:1600mm. Max height:400mm. Features: Glass washing machine adopts horizontal structure for cleaning and drying on flat glass,with standard series,coated film series and LOW-E.Procedures:Loading seaction-cleaning seation(three grades washing)-Drying section(18KW air dryer)-off-loading section.it's a necessary machine on glass deep processing.

Toughened Glass As the name suggests, this glass is about four times stronger than the normal annealed glass. Under the brand name of DURASAFE, the company manufactures international quality toughened glass that is already widely used across the country. The special feature of this glass is that it is available in any form and curve as per the requirements of architects, interior designers and builders. This feature caters to the artistic frenzy of the designer and caters forms beyond definition. Characteristics : The surface compressive strength of tempered glass is about 25,000 psi as compared to around 10,000 psi of normal sheet glass. Tempered glass provides thermal resistance to temperature differentials as high as 250 deg. C. Tempered glass is not easily breakable. Even in case of breakage, it offers relatively higher safety as it leaves no sharp edges. It is the safest option for automobile windows, glass doors and structural glazing. It is relatively more scratch resistant and hence a true value for your money. Once tempered the glass cannot be cut, ground or drilled. It is made in accordance to sizes, drawings, or templates of the required glass.

Glass arbors, just like arbors made of more conventional materials, are a fine choice for their key function, which is providing comfort in a garden or a park. Among advantages of a glass arbor: the glass structure can be opening type, so your can rest in an open arbor and enjoy fresh air and flower scent while the weather is good, but hide behind the glass if it aggravates; you can enjoy watching the environment through the translucent façade without perceiving the thin boundary in between; the arbor glazing is a great protection from the weather and wind without impairing the feeling of ‘being in the wilds’; the laced and transparent structure of an even big arbor will not create a visual impression of obstructed space in your garden. What are the design features of glass arbors? The most widespread type of arbor glazing in modern construction is either shutterproof glass of different thickness or safety glass. This material has a number of undisputable advantages: high strength which enables to withstand big wind loads and humming blows; safety in operation which guarantees no cuts in case the glass is broken after all; long life.

Main use: Gx-p series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purpose, interior decoration, furniture appliances, instrumentation, lamp, etc. Main technical features: Glass sheet size: max size 3500*12000(mm), min size 60*60mm Perfect processing quality: comply with gb9963, gb9656, ecer43, ansiz97.1 standards; Broad glass processing applicability: float glass, coated glass, roddle patterned glass; Advanced heating methods: radiation/convection matrix heating optional with intelligent heating control system; Lower energy consumption: continuous production and tempering, energy saving; Easy operation: user-friendly inteface, self diagnosis, achieving auto-control in whole process Convenient datea storage: mass storage device, applicalbe for industrallized production and management.

Ultra clear glass is also called low iron glass, high transmittance glass. It is a high quality, versatile new high-grade glass, light transmission rate is generally above 91%, with a crystal clear, elegant features. CRYSTAL PRICE IN GLASS FAMILY. Features: 1.Thickness:1mm - 25mm 2.Size:1524x2134mm,1650x2140mm,1830x2440mm,2140x3300 mm, 2140x3660mm,2250x3300mm, 3660x2140mm etc. 3.Color:Clear 4.Shape: Flat 5.Structure:Solid 6.Function: Decorative Glass, Heat Absorbing Glass 7.Safety wooden crate, paper/powder interlayer between sheet, suitable for ocean and land carriage

Class type: float glass, tempered glass, reflective glass, low-e glass etc. Pvb or glass color: clear, bronze, grey, green, milky white, french green etc Thickness: 3+0.38/0.76+3, 4+0.38/0.76+4, 5+0.38/0.76+5, 6+0.38/0.76+6 etc Feature: safety glass, sound insulation, anti-uv, energy saving Application: curtain wall, door, windows, balconies, elevators, railings, and skylights Size: 2440x1830mm, 3300x2134mm, 3300x2250mm, 3210x2250mm, 2134x1650mm, 2200x1650mm Strong wooden crates

Round glass edge bevelling Frb xl royal bevelling and grinding machines are designed for your supreme comfort and safety for round and irregular shaped glass cuts. The bevelling and grinding of the round glass and mirrors automatically achieved with a tolerance of +-0.1 as to the requested measures. Copying thru the glass shape itself semi-automatically does the bevelling and grinding of the oval glass and mirrors. The oval glass and mirrors smaller than 550 mm diameter are bevelled and grinded by the use of the additional plate attached. The rotational speed of the plates electronically adjusted either from diamond attachment hear or control panel. The meters at the diamond head makes the operation comfortable. Features: Glass thickness : 3 to 30 mm Grinding : 150 - 2200 mm Bevelling : 150 - 2400 mm Operating types : manual but automatic at oval and circular glass Diamond wheel diameter (grinding) : 100 - 150 mm Diamond wheel diameter (bevelling) : 150 mm Head inclination : 0 - 15 Diamond wheel stroke : 50 mm Bevelling width : 5 - 60 mm Bevelling types : vertical and various edges Technical specifications: Type : frb xl royal Operating area : 3500 x 3500 mm Engine power : 4.15 kw Engine rpm : approx. Bevelling 2500 rpm, grinding 5000 rpm Weight : 670 kgs. In wooden case