It is used as the framework material for various kind of tires, V-belts and hoses.
*high strength, low breaking rate, Wearable and anti-fatigue.
Standard Export Packing
Supplier: Pu foam scrap, memory/ visco foam scrap. rigid foam scrap, pvc foam scrap. pp non woven waste, pvc resin off grade/wet, abrasive garnet, epoxy resin, polyester yarn scrap, raw cotton scrap, quartz ore and sulphur
Services: Distributor of polyurethane trim foam scrap, sulphur, epoxy resin, polyester resin, quartz ore, recycled dacron and abrasive garnet.
Buyer: Pu foam scrap/waste. pu trim foam, polyurethane foam scrap, ldpe/hdpe/pp reprocessed granules, pvc offgrade/ reprocessed/regrind pp non woven scrap, abrasive garnet, quartz ore, sulphur, epoxy resin, polyester resin, and recycled dacron.
We deals in the following products :- 1) Polyester Film 2) Shrink Film
Supplier: Soda ash light / dense 99.2%
sodium bicarbonate
caustic soda flakes 99%
sodium sulphate anhydrous (ssa) 99%
sodium sulphite flakes (ssf) 60%
sodium metabisulphate
hydrogen peroxide (h2o2) 50%
formic acid 85%
glacial acetic acid
paraffin wax
liquid paraffin (white oil) lp 100
menthol crystal
fumed silica
deg (di ethylene glycol)
mono ethylene glycol (meg)
poly ethylene glycol (peg),
base oil 150n, bs 150, 600n
bitumen 60/70
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
ferrous sulphate heptahydrate
additive for lubricating oil
aromatic chemicals
Services: Exporting of chemicals & other products
Abrasive Garnet produced from River from India in All Grades.
Head Diameter: 2mm-18mm Material: iron wire Type: Common Nail,polished,galvanized hot dipped galvanized
Head Diameter: 2mm-12mm Length: 1/2''-8'',25mm 38mm 50mm 65mm 100mm Material: Steel, polished,galvanized hot dipped galvanized Type: Concrete Nail
Heat Area - 100m2 Dimension(W*H*D) - 450*975*782mm Weight - 70kg Air inlet pipe - 50mm Air outlet pipe - 80mm Auto-burning Time - 13h-27h Fuel Consumption - 0.8-1.8kg/h Efficiency - 90% Hopper Capacity - 20kg Electronic consumption - 100-400w/h Rating voltage - 230v
Tests Value Unit Melt Flow Rate (MFR)2.0 0.4 g/10min Density 920 2 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break 12 Mpa haze 15 %â?¤
Tests Value Unit Melt Flow Rate (MFR)2.0 0.4 g/10min Density 920 2 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break 12 Mpa haze 15 %
