Bluetooth module 4.0 Introduction: Support bluetooth v4.0 low energy (ble 4.0) wireless standards. Support slave and master mode operation. Super low energy mode: 13.6ma rx current at 3v, 13.3ma tx current @0dbm at 3v. Support multiple network protocols. Support smart configure for network. Support program’s remote upgrading. Optional antenna: internal or external. Support uart, pwm, gpio, ad and other interfaces. Micro sizes: 12mm x 20mm x 3.5mm, smt. Power supply: battery or 3.3v single supply. Fcc certification. Comply with rohs standard. Access cloud platform for free. Application: Handheld devices Personal medical Internet of things Wireless sensor & industrial control Light control
The Module Is A Max.4Dbm( Class2 ) Module. * Fully Qualified Bluetooth V2.0+Edr System. * Integrated Switched-Mode Regulator. * Integrated Battery Charger. * Embedded Kalimba Dsp Co-Processor. * Integrated 16-Bit Stereo Audio Codec * 95Db Snr For Dac. * Enhanced Audibility And Noise Cancellation. * Integrated With 8M Bits Flash Memory. * Support Host Interface: Usb Or Uart. * Support Digital Audio Bus : Pcm, I2S Or Spdif. * Hsp/Hfp/A2Dp/Avrcp Profiles Support. * Rohs Compliant. * Small Outline. 16 X 15 X 2 Mm. * Applications * High Quality Stereo Wireless Headsets. * High Quality Mono Headsets. * Hands-Free Car Kits. * Wireless Speakers. * Voip Handsets.
Bluetooth ver. 2.0+edr certification Transmit power up to +18dbm(class1) Low current consumption: Hold, sniff, park, deep sleep mode 3.0v to 3.6v operation Full bluetooth data rate over uart and usb Support up to 7 acl links and 3 sco links Enhanced data rate(edr) compliant For both 2mbps and 3mbps modulation modes Interface: usb, uart&pcm( for voice codec) Spp firmware with at commands Rohs compliant Small outline: 28.2 x 15.0 x 2.8 mm Application:- Access point Domestics and industrial applications Serial adapter Gps, pos, barcode reader.
* Maximum of 4dbm (class2) module with antenna * Bluetooth standard version 2.0 + edr compliant * Low current consumption * Hold, sniff, park, deep, and sleep mode * 3.0v or 1.8 operation * Supports for up to seven slaves: sco links (3), acl links and piconet (7) * Interface: usb, uart and pcm (for voice codec) * Hci or spp, hsp/hfp, hid and dun firmware is available * For 802.11 co-existence * Rohs compliant * Small outline Applications: Pda, nb, and car kit Presenter, mouse, and keyboard Cordless headset, digital camera and printer Access points Gps, pos, and barcode reader Data collector Domestic and industrial applications.
Bluetooth standard v2.1+edr. Integrated switched-mode regulator. Integrated battery charger. Embedded kalimba dsp co-processor. Integrated 16-bit stereo audio codec 95db snr for dac. Enhanced audibility and noise cancellation. Integrated with 8m bits flash memory. Support host interface: usb or uart. Support digital audio bus : pcm, i2s or spdif. Hsp/hfp/a2dp/avrcp profiles support. Rohs compliant. Small outline. 21 x 16 x 2 mm.
The TS-M1021 is a diminutive Bluetooth module, measuring merely 8 by 12 millimeters, designed for applications requiring minimal size and low power consumption, without compromising on cost-effectiveness. This module is renowned for its remarkable stability and wide-ranging compatibility. It comes with a default setting that facilitates Bluetooth serial port transparent transmission, allowing users to modify serial port baud rates, device names, and additional parameters using the supplied AT commands. This feature enables adaptable operation and straightforward implementation, making the module an ideal choice for a diverse array of customer development projects. Model No.: TS-M1021 Features Bluetooth Version: BLE 5.1 Frequency Band: 2.402GHz-2.480GHz ISM band TX Power: -20dBm~+10dBm Receive Sensitivity: -97dBm Air Rate: 250Kbps/1Mbps/2Mbps Antenna: Ceramic Antenna Advise Range: 100m Memory: 512KB FLASH+56KB RAM Size: 12*8*1.5mm Pin/GPIO: 12/7 Power Supply: 2.0~3.6V Operating Temperature: -40~+85 Peripheral Interface: UART/I2C/ADC Serial Transparent Transmission Rate: BLE 20KB/s Applications Smart home Location tracking Intelligent educational equipment Measurement and monitoring system Industrial sensors and controls Medical equipment monitoring and wireless control
* Bluetooth standard Ver. 2.0 + EDR compliant. * Low current consumption : * Hold,Sniff,Park,Deep sleep Mode * 3.0V or 1.8V operation * Support for up to seven slaves : * SCO links,ACL links,Piconet * Interface: USB,UART&PCM(for voice CODEC) * HCI or SPP,HSP/HFP,HID,DUN firmware is available * Support for 802.11 Co-Exsitence * RoHS compliant * Small outline. 14 x 12 x 2.2 mm Applications:- * PDA,NB, Car Kit * Presenter, Mouse, Keyboard * for Cordless headset * Digital camera & printer * Access Points * GPS,POS, Barcode Reader * Data collector * Domestic and industrial applications.
Bluetooth module
TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers. Model No.: TS-M1020D Features Bluetooth Version: BLE 4.2+SPP 3.0 Frequency Band: 2.402GHz-2.480GHz ISM band TX Power: -20dBm~+4dBm Receive Sensitivity: -95dBm Air Rate: 250Kbps/1Mbps/2Mbps Antenna: Ceramic Antenna Advise Range: 80m Memory: 256KB FLASH+128KB RAM Size: 12*8*1.5mm Pin/GPIO: 12/7 Power Supply: 3.1~4.35V Operating Temperature: -20 ~+85 Peripheral Interface: UART/SPI/I2C/ADC Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s Applications Smart home Location tracking Intelligent educational equipment Measurement and monitoring system Industrial sensors and controls Medical equipment monitoring and wireless control
