International Maritime Organization concerning the Marine Environment Protection Committee conferred upon it by international convention for the resolution IMO.MEPC.107(49) adopted on 18 July 2003.The resolution made the fully new requirement referring to 15ppm bilge treatment plant in Annex I of í¦MARPOL73/78í+.
The YWC type OWS developed for this is the high-tech newest product which can effectively dispose all kinds of bilge water including fuel oil, high-density residual oil and emulsion mixture combined with black ferric oxide and surfactant.
There are nine types of specifications in YWC series. The smallest type is YWC-0.25 which can be installed on ship less than 1000DWT .The biggest type is YWC-5.00 which can be installed on ship more than 300 thousand DWT. All of type drawings and devices are approved by China Classification Society for type test.The types and specifications are as follows:We can also design and produce the special type of Oily Water Separator according to the demands of our customers.This OWS can also be used in industrial and petroleum, besides in ship vessels. The effluent oil content from YWC can meet any standards of Environment Bureau in China.
Supplier: Reeds diffuser, room fragrance spray, water base fragrances, oil based fragrance, aroma diffuser, satchet bag, clay scent, air revitaliser, candle
A suitable solution for. Airborne substances, viruses and other fine particles in the nanoscale range are filtered out of the air with a separation efficiency of 99.995 % and the activated charcoal filter also removes odours. The integrated CO2 sensor alerts you should additional ventilation be required.
YSF-Q series Marine oily water separator is according to the requirement of GB/T4795-1999 and IMO Marine Environment Protection Committee. The product can also be used to treat oily water in industry and its discharge standard is in compliance with the requirements of state Environment Protection Department besides of separating the bilge oily water on board.
Inlet pressure: 0.6~1.0Mpa Inlet temperature: 5~65 celsius degree Initial pressure drop: less than 0.005Mpa Filter route: 5um Water removal rate: less than 99% Outlet air oil content: less than 10ppm
Supplier: Shampoo, cosmetics products, biscuits, beverages, snacks, candies, bar soap, beauty soap, detergent powder, laundry powder cleaning products, air freshener, instant coffee, dishwashing liquid soap, spring water, natural water
Supplier: Air compressor (screw type air compressor, piston air compressor, centrifugal air compressor), Compressed air dryer, refrigerated air dryer, desiccant/absorption air dryer, absorbic air dryer, regenerative air dryer, (compressed) air filter, filter separator, oil water serapator, filter element, air cooler, air chiller, air condenser, Industrial water-cooling set, and relative spare parts
Services: Engineering consultant, model choosing suggestion, installation project, after-service
Air filter compressed air filter 1). Separator filter (HF9) For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content) Two-stage filtration * First stage: two stainless steel orifice tubes provide 10 micron mechanical separation * Second stage: in-depth fiber media captures solid and liquid particles to 3 micron 2). Air line filter (HF7) For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two-stage filtration * Firt stage: captures larger particles with alternate layers of fiber media and media screen * Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media 3). High efficiency oil removal filter (HF5) For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two stage filtration * First stage: multiple layers of bonded, blended fiber media for fine coalescence * Second stage: multiple layers of bonded, blended fiber media for fine coalescence Outer coated, closed cell foam sleeve 4). Ultra high efficiency oil removal filter (HF3) For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two stage filtration * First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser * Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence Outer coated, closed cell foam sleeve 5). Oil vapor removal filter (HF1) For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two stage filtration * first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor * Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor Multiple layers of fine media prevent particle migration Outer coated, closed cell foam sleeve prevents fiber migration Designed life is 1000 hours under rated conditions.
Air dryer(desiccant air dryer) hsd-10wxf Desiccant compressed air dryer (heatless purge and externally heated purge) 1). Heatless purge desiccant air dryer Inlet temperature: 0~45 celsius degree Inlet oil content: 0.01ppm Working pressure: 0.6~1.0mpa Dew point: -20~-70 celsius degree Purge air: 12% Desiccant: activated alumina & molecular sieve Purge mode: heatless purge Working method: continuing alternation between two towers Working periods: t=10~20min. Control mode: micron computer auto controlling Installation mode: indoor, non-basement 2). Externally heated purge air dryer Inlet temperature: 0~45 celsius degree Working pressure: 0.6~1.0mpa Dew point: -40~-70celsius degree Purge air: 4~6% Desiccant: activated alumina & molecular sieve Purge mode: externally heated purge Working method: continuing alternation between two towers Working periods: t=120~140min. Control mode: micron computer auto controlling Installation mode: indoor, non-basement
Sterile filter * adopt 6 grades element which complement with America UPS plastic biology * element material is SPF who is good at hydrophobe, precision to be 0.01um.It can filter bacterium, virus & phagocyte. * o ring seal (silica rubber and fluorine rubber), ensuring to filter air 100%. * unique outer heat-resistant polypropylene.It can stand 140 celsius degree steam bacterium removal and will not reduce its precision if repeat sterilizing. * stainless steel of housing, polishing of internal, max.Working pressure to be 1.0mpa. * operation temperature less than 80 celsius degree .
