Glass Bricks

With the rapid development of the world automobile industry, the production process of automobile rearview mirrors has also made great progress, and then higher requirements have been placed on the performance and quality of the mold bricks. The glass bending brick has the following characteristics: First, the change of the reheating line is low, because the glass bending brick is sintered at 1050 ° C, which ensures the long-term use of the glass bending brick at 800 ° C. The characteristics of the burning line change to zero and no deformation; Second, the structure is fine, the glass bending brick is formed by micron material mixing by high-speed agitator, and the coarsest material particles in the batch are less than 1000 mesh, sectional structure Very fine; Third, the thermal shock stability is good, the glass hot bending mold brick will not appear any cracks (including cracking phenomenon) during long-term use; Fourth, the processing is convenient, the glass hot bending mold brick is according to user requirements specifications Made, this avoids the problem of large cutting and waste; fifth, the price is low, the price of glass bending bricks is lower than that of similar products. Glass hot bending mold bricks can also be used in industries such as hot bending glass, hot melt glass and process glass.

With the development of the world automobile industry in recent years the technology on rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors. MD Mold Bricks characterize as follows: 1. Low permanent linear change on reheating Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks. 2. High dense structure MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rod is 1000 with extremely fine section structure. 3. Good Thermal Shock Stability. No cracks even chap would be happening after long service of the bricks 4. Easy to be machined The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks. We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market. MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.

Zircon brick is suitable for working under pressure with its good thermal shock resistance. In metallurgical industry, zircon brick is widely used in ladle lining, casting export, high temperature induction furnace lining and so on. With the strong resistance to acid slag and glass liquid, in glass industry, zircon brick is applied to severely damaged parts of glass furnace. In addition, crucible, pipe, boat, dish and test container made by zircon brick are widely used in place related to high temperature. Zircon brick with high density and low porosity is suitable to the liner of glass furnace of glass fiber.

The glass is mainly made of silica sand and soda ash as raw materials which are melted at a high temperature. Glass melting furnaces are thermal equipment for melting glass and are usually constructed of refractory materials. Glass melting furnaces can be divided into two categories: pool kiln and crucible kiln. The pool kiln is the most commonly used kiln type in the glass industry. It is made of refractory materials, and has a flame pool kiln and an electric kiln. Casting zirconium corundum bricks are commonly known as white iron bricks. It is the most important refractory material to ensure the normal operation of the glass melting furnace. At present, the melting rate of the glass melting furnace at home and abroad is increased, the kiln age is extended, and the fuel consumption is reduced mainly due to the use of the refractory material. The use of fused zirconium corundum brick in the glass melting furnace is to build the upper pool wall, small furnace flat raft, small furnace raft, stone raft and chest wall. Fused cast blocks usually named zircon corundum brick also name AZS bricks( alumina zircon silica ),according to the ZrO2 content difference ,can be named AZS 5.5 ,AZS 12 .AZS 33, AZS 36, AZS 41 and so on. Beside because this type bricks are produced by special electric furnace by model, we also called this products Fused cast AZS bricks. Also according to the brick if have shrinkage cavities, we call them PT, QX, ZWS, WS. These bricks are widely used for iron & steel furnace and glass furnace, also chemical industrial furnace, especial in the glass furnace, you will find it usually.

Supplier: Float glass, floor brick

Supplier: Glass block, glass brick

Warranty: 1 Year After-sale Service: Online technical support Size: 30 x 30cm Style: CLASSIC, Modern Occasion: Interior Wall Project Solution Capability: graphic design, 3D model design Application: Hotel, Hotel Design Style: Modern Place of Origin: Guangdong, China Brand Name: Schomex Model Number: FSC-GM-B20401 Shape: Hexagon Material: Glass Product Name: Electroplated Glass Mosaic Subway Tile Usage: Indoor Decoration Surface finished: Polishebd Sample: Sample 1 Sheet OEM & ODM: Support Sheet size: 300x300mm/ 12"x12" Color: Mix Color Customized