Pellet Mill

Pellet mill Pellet fuel is made mainly of sawdust, shavings and fines leftover after processing trees for lumber and other wood products. At a pellet mill the material is dried, compressed, and formed into small eraser-sized bits they are clean, pleasant smelling and smooth to touch. Working principle, Adopt gear transition, and make pellets Advantages of wood pellets, * reduces our dependence on oil and gas. * pellet fuel cost is not dictated by world events; therefore cost is more affordable and predictable. * since pellet stove emissions are so low they can be burned in most areas even those with burning restrictions. * pellet fuel has been proven to provide the cleanest burn of any solid fuel. * only minimal clearance is needed for appliance installation. Because of the near total combustion (around 98.5%) pellet stoves produce virtually no creosote. This also allows installation of a pellet stove by direct vent... Without a chimney! * sustainable source of fuel. * reduces waste destined for landfills and the cost of disposing waste is greatly reduced. * one ton of wood pellets has the heat value of about one and a half cords of wood and stacks easily in one third the space! this makes it possible to easily store fuel for the entire season. * wood pellets are a clean, environmentally friendly, natural, renewable fuel resource.

Flat-die pellet mill Packed in steel box

This is a new patent of pellet mill special for wood sawdust. But it can also apply to the stalk, straw, and son on. It is adopted the technology from Europe. The output volume is high, energy consumption is low and the operation is convenient. A) The materials are pressed by the 3 rollers at one time, so the pressed area increases 1 more roller, so the output is improved. B) The three rollers are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower. Packed in steel box

1. Material can be dried in and stock - out, without drying, using differential, universal joint transmission, self-equipped motor or diesel engine, low energy consumption, high output, easy operation, low noise. 2ã??It has the characteristics of easy operation and simple process. It can be granulated with powder feed and grass meal without (or a little) liquid pouring Therefore, the moisture content of pellet feed is basically the moisture content of material before granulation, which is more conducive to storage. 3ã??Competitive price, good quality, dry material processing, high hardness, smooth surface and internal ripening of feed particles produced can improve the digestion and absorption of nutrients. 4ã??The new technology of extrusion granulation and polishing has completely solved the problems of low organic material addition and difficult granulation.

Biomass ring-die pellet mill is a nationally pioneering product designed by the technical team from Dingli. The design of the molds is unique. The press rollers are made of wear-resistant alloy material, The working life of wearing parts is several times of similar products. Transmission structure can realize the automatic filtering process of grease. This product with unique design, proper structure, low energy cost, and strong wear resistance, which fills the domestic technical blank of vertical ring-die pellet feeding equipment. This palletization equipment is applicable to materials that are difficult to mold and bond, such as rice husk, sunflower seed husk, and peanut shell, branch, trunk, wood rind, crop straw, rubber, cement, ash, and other chemical materials. The pelletized product can be used in the biomass fuel plant, power plants, timber processing plants, fertilizer plant, and chemical plants. This product is a satisfying compression molding equipment with low capital cost, quick profits, and free risk.

Feed pellet mill machine Overview:HuaQiang supplies complete turnkey project for poultry & livestock feed pellet line, , aqua feed pellet line.The feed pellet mill is one of the key machines in feed pellet production line. It??s die mold is made of stainless steel or alloy steel for your choice. pellet mill machine has the characteristics of low cost, reasonable structure, compact layout, reliable performance and easy maintenance.Applicable feed pellets for animals: chicken, duck, goose, pig ,cattle, fish, shrimp, crab ,sheep, etc.Features of feed pellet mill1. Applicable raw materials: corn, rice, soybean and other feed formula materials etc.2. It's widely used in poultry, livestock and aqua feed pellets making 3. Gear driving system, with good transmission rate, stable and reliable performance and low noise;4. Coupling assembly---two roller system.5. With two rollers inside, better for poultry feed making;6. Stainless steel conditioner.7. Intelligent automatic control system.8. Output pellet size:2mm-12mm (optional).Technical parameters for feed pellet mill:ModelOutput(t/h)Main   power(KW)Conditioner   power(KW)Feeder   power(KW)Pellet size(mm)HKJ25C1-2t/h22KW1.1KW0.751.0-12.0mmHKJ322-4/h37KW2.2KW0.751.0-12.0mmHKJ352-6t/h230KW2.2KW1.51.0-12.0mmHKJ404-8t/h245KW4KW1.51.0-12.0mmHKJ4206-10t/h255KW4KW1.51.0-12.0mmDetailed images:Full stainless steel conditioner   checking holeFull stainless steel conditioner  Pelleting chamberStainless steel ring die Feed pellet mill pictures Why Choose our factory1. Non-dust workshop.2. Siemens motor, Imported SKF bearing.3. Auto cooling and oil adding system(optional).4. National patent and Reasonable price.5. High efficiency with low power consumption. Packing condition1.Wooden or metal case according to specific size of each equipment, we twine thick plastic coating for each machine.2.Tight the equipment in the truck without space to ensure no rubbing during the transportation.FAQ1.Q: How can I trust on your quality? Answer:  1). All of the machine be tested successfully in Huaqiang workshop before shipment.  2). The working lifespan of Huaqiang machines is at least 15 working years. 2. Q: Does your company provide Engineers Abroad Service? Answer: Sure, we provide it. And we can provide free training for on-site workers.3. Q: How to train our staff about operation and maintenance? Answer : We will provide every detailed technical instructive, pictures, videos to teach them for the operation and maintenance. In addition, our engineers for guide assembly will teach your staff on site.

Customized Commercial wood pellet mill Wood can be used for making furniture,door,and can be burned for heat.But recently,to protect environment,and reduce the fuel gas emission.supported by government to use green fuel,the Commercial wood pellet mill wood pellet making machine can make it ,therefore the wood flour pelletizer is more and more popular. Description of Customized Commercial wood pellet mill: welcome to buy customized Commercial wood pellet mill from Jingerui ,which is one of the best wood pellet making mill machine manufacturers and suppliers in China.Shandong Jingerui is a professional small wood pelllet mill manufacturer,with 14 patent technology and 20 years of experience of Machinery making. Characteristics of customized Commercial wood pellet mill: 1.The customized Commercial wood pellet mill of Jingerui with double layer ring die,and up and down use. 2.Easy operation and low labor costs. 3.Energy saving and automatic lubricating system. Technical parameter of customized Commercial wood pellet mill: Model Power Pellet diameter Output SZLH470 45kw 4--12 0.7-1 SZLH560 90KW 4--12 1.2-1.5 SZLH760 160KW 4--12 1.8-2.0 SZLH850 220KW 4--12 2.5-3.0

Pellet Mill Parts Pellet mills are essential machines used in the production of pellets from various raw materials, and they consist of several critical components that require regular maintenance and replacement. Key Components of Pellet Mills 1. Die and Rollers: The die is a crucial component that shapes the pellets. It has holes through which the raw material is pressed to form pellets. Dies can be made from various materials, but high-quality alloy steel is preferred for durability and resistance to wear. Rollers are used to push the material into the die. They come in different configurations depending on whether the mill is a flat die or a ring die type. Regular replacement of dies and rollers is essential due to their wear over time. 2. Bearings: Bearings reduce friction and support the moving parts of the pellet mill. High-quality bearings, such as those made by SKF, are crucial for the efficient operation and longevity of the machine. 3. Gearbox: The gearbox is responsible for transmitting power from the motor to the mill. It must be robust and designed to handle the operational stresses of the pelletizing process. Gearboxes made from high-quality materials ensure stable transmission and long service life. 4. Pellet Cutting Knives: These knives cut the formed pellets to the desired length. They are typically made of stainless steel to resist corrosion and are designed for easy adjustment. 5. Other Components: Additional parts include the principal axis, various nuts and screws, and the frame of the mill. Each of these parts plays a role in the overall functionality and stability of the machine. Importance of Quality Parts Using original and high-quality spare parts is crucial for maintaining the efficiency and effectiveness of pellet mills. Original parts are designed to fit perfectly and perform reliably, reducing the risk of breakdowns and extending the life of the equipment. Future Fortune emphasizes the use of wear-resistant materials and rigorous quality control in its parts production.