E-glas fiber
It is the idea reinforced materials for plastics manufacture by pullulation process, since there is no twist and easy to impregnate by resin. It is mainly used as reinforcing material in engineering plastics, such as PA6,PA66, PA12,PC,PBT,PET,LPPO,PBO,PPG,PPS,PP,etc. It is also widely used in automotive industry, electronics industry and chemistry industry
Packed in 25kgs each carton box
The spec as follows: Name:E- Fiber glass micron:9-11micron Length:30cm-70mm Color:white We also can supply it with your requirements.Please kindly give us your requirements.
Manufactured in Taiwan, high quality E grade of glass fiber yarn.
Any you need please contact me
Fiberglass chopped strands Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin.Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic pa, pbt, pet, pp, abs, as, etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry, household products, pump casing, anticorrosion chemistry and exercise equipments. Yixing product characteristics: 1.Brand name:yixing fiberglass chopped strands 3.Filament diameter: 13um etc 4.Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm etc we can produce some customized products with special requirement according to Your demand 5.Excellent clustering property, few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin, no fiber out product surface, good surface quality 8.Good strand integrity, low static, low fuzz, excellent mold flow ability 9.Quick wet-out by resin, excellent technical&mechanical properties 10.Water ratio:
E-glass glass fiber texturized fabric This cloth is weaved by texturized glass fiber, it has the advantages of spongy covering and quick absorption .It is mainly used in friction facing sheet and mechanical brake friction scotch block, other friction materials that meet strict demandúºs branches, and some resistance to heat materials covered with bitumen and rubber, etc. Properties 1.Feel leavening and soften with hand, sealed covering. 2.High strength and wellí¬distributed. 3.The product made from this martial will be hardly layered ruptured and deformed. 4.Favorable absorbability and easy to be combined with base resin.
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit. Features: 01. On-board Function Generator. 02. Transmitter : 1 No. 03. Receiver : 2 Nos 04. Fiber Optic Analog Link. 05. Fiber Optic Digital Link. 06. Signal strength indicator. Technical Specification: 01. Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible. 02. Receiver : 2 Nos. silicon photo detectors 03. Modulation : Intensity modulation. 04. Driver Circuit : Analog and digital configuration for 635 nm LED. 05. Analog Bandwidth : 35KHz. 06. Digital Bandwidth : 50KHz. 07. On-Board Function Generator : 08. Sine Wave &TTL Square Wave : 09. Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz 10. Amplitude : 0 to 4Vpp. (Except Square) 11. Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER 12. Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power. 13. Fiber Optic Cable: 14. Type : 1000 micron Step Index, Multimode Plastic Fiber 15. Fiber Lengths : 1&5 Meter. 16. Power Supply : GND, +5V, +12V, -12V at100mAINT.
Product Information: Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc. Normal width is 1040mm/1270mm, but also can produce it according to your requirements. Product Specifications EMC100: Powder/Emulsion, 100±8g/m2, 1040/1270/2080 3600mm Width; EMC150: Powder/Emulsion, 150±12g/m2, 1040/1270/2080 3600mm Width; EMC225: Powder/Emulsion, 225±15g/m2, 1040/1270/2080 3600mm Width; EMC300: Powder/Emulsion, 300±15g/m2, 1040/1270/2080 3600mm Width; EMC380: Powder/Emulsion, 380±18g/m2, 1040/1270/2080 3600mm Width; EMC450: Powder/Emulsion, 450±20g/m2, 1040/1270/2080 3600mm Width; EMC600: Powder/Emulsion, 600�±25g/m2, 1040/1270/2080 â?3600mm Width; Product Advantages: *Short strands of fibers held together by a styrene binder *Builds up thickness quickly *Very economical and offers good stiffness. *Conforms to tight curves and corners *Can be torn of cut to size *Low cost and easy to use Packaging Information Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Our range of Fiberglass Tape is made of E-Glass yarn. 1) Good thermal resistance 2) Excellent insulating 3) Good corrosion resistance Applications: Fiberglass Tape can be widely used as wrapping and banding material for transformers, electric motors and cables. Specifications: Thickness(mm) Width(mm) Length per Roll(M) 0.1mm, 0.13mm, 0.15mm, 0.20mm etc 10mm, 15mm, 20mm,25mm,30mm etc 50M/100M Etc. It could be packed with cartons. 50M per rool, 100m per roll.