Micro boring heads
Boring head available in 2", 50mm, 2 1/2" interrogated, 62 mm interrogated, 3", 75mm, 4", 100mm.
Tool hole sizes varies from 1/2" to 1" respectively.
Minimum lot--100 pieces
A Forged Round Head Plug is a type of pipe fitting that is used to block the flow of fluid through a pipe. It is made of a solid piece of metal that is forged into the desired shape. The head of the plug is round and has a threaded bore that allows it to be screwed into a pipe. The following are the product description and specifications of a forged round plug: â?? Product description: A Round head plug is a mechanical fitting used to block the flow of fluid in a pipe. It is made of a solid piece of metal, typically Carbon steel, Alloy steel or Stainless steel, and has a threaded bore that allows it to be screwed into a pipe. The head of the plug is round and may be flat or domed. â?? Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Forged Round head plugs are used in a variety of applications, including: â?? Plumbing â?? HVAC â?? Fire sprinkler systems â?? Oil and gas pipelines â?? Chemical processing â?? Water treatment They are a reliable and durable type of pipe fitting that can withstand high pressures and temperatures. Here are some additional information about forged round plugs: â?? They are typically made of carbon steel or stainless steel. â?? They are available in a variety of sizes and pressure ratings. â?? They can be threaded or socket welded. â?? They are often used in high-pressure applications, such as fire sprinkler systems and oil and gas pipelines. â?? They are also used in low-pressure applications, such as plumbing and HVAC systems. Round head plugs are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are a good choice for applications where strength, durability, and pressure resistance are important.
A forged hex nipple reducing size is a type of threaded pipe fitting that is made by forging, a process that involves shaping metal by hammering or pressing it. It has a hexagonal head on one end and a threaded bore on the other end. The bore is smaller than the outside diameter of the nipple, which allows it to be used to reduce the size of a pipe. Technical Specifications: The following are the technical specifications of a forged hex nipple reducing size: 1. Size: 1/8 Inch to 2 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 5. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 6. Thread: NPT, BSP, BSPT Applications: Forged hex nipple reducing sizes are used in a variety of applications, including: 1. Plumbing 2. HVAC (heating, ventilation, and air conditioning) 3. Machinery 4. Automotive 5. Oil and gas Advantages: The following are some of the advantages of using forged hex nipple reducing sizes: 1. They are strong and durable. 2. They can withstand high pressure and temperatures. 3. They are corrosion resistant. 4. They are easy to install. Overall, forged hex nipple reducing sizes are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are strong, durable, and corrosion resistant, making them a good choice for demanding environments. However, they are also more expensive than other types of pipe fittings and may not be available in all sizes.
Discharge Minimum 375 ml per stroke or 15 Ltr. / 40 stroke completed in 1 minute. Static water level depth 20 - 40 meter Stroke Length 125 mm + 4mm Cylinder - Cast Iron or Stainless Steel or UPVC Bore well Casing Size 100 NB to 150 NB Connecting Rod - Mild Steel or Stainless Steel in 3 meter length Rising Main Size 32 NB MS GI Riser Pipe or 38 mm x2mm SS Pipe or 40 NB UPVC Pipe with Coupler or 40 NB UPVC with SS Socket and Nipple in 3 meter length Above Ground Structure (Pump Stand, Head, Handle, Water Tank etc.- (Mild Steel with hot dip galvanized)
Static water level depth 40 90 mtr Stroke Length 100 mm + 4 mm Discharge Minimum 300 ml per stroke or 12 Liter /40 stroke completed in 1 minute Bore well Casing Size 100 NB to 150 NB Cylinder - Cast Iron or Stainless Steel or UPVC Rising Main Size 32 NB MS GI Riser Pipe or 40 NB UPVC with 3 piece Coupler or 40 NB UPVC Pipe with SS Nipple and Socket in 3 meter length Above Ground Structure (Pump Stand, Head, Handle, Water Tank etc. -( Mild Steel with hot dip galvanized) Connecting Rod - Mild Steel or Stainless Steel in 3 meter length
Supplier: Boring heads, shanks, collets, multi angle vices
The chain link conversion head is made of galvanized steel and is equipped with double-sealed flange bearings. Flange bearing are used for the handle support. The spout of the water tank shall be made of 2 inch nominal diameter pipe. The pipe holder in the water tank shall be welded to a smaller flange. Adequate sealing is provided. The pump body shall have a base plate with four foundation bolt holes exactly 9 inches square (i.E. 228.6mm) and a diameter of 20mm (bore size) to conform to the cwsa ghanaian standards.The pump stand will be fixed on a ground fixing assembly with a suitable rubber gasket the foundation bolts shall be of ° 16mm, length 160mm with at least 30m thread at the upper end. The foundation bolts are welded on a frame of steel rods. The four ° 16mm, length 160mm foundation bolts have to fit the above mentioned foot flange. The ground fixing assembly has to be brought in position in the fresh concrete, so that a minimum of 30mm of thread remains out of the concrete.Riser pipe with tip-stretched (not welded-on) spigot (male end) and socket (female end), for connection purposes furnished with male/female rope thread at pipe and to avoid wear and tear between the rods and pipes during operation a centralizer is to be provided.The 10.8 mm dia stainless steel pump rods for the connection to the above mentioned gmimkii reciprocating hand pumps shall have rolled on threads.The full brass pump cylinder shall be assembled for the employment together with the above û mentioned components that are the above ground system the lightweight riser pipes and stainless steel pump rods.Pump cylinder size 1 +ö x 20ö. The cylinder shall be of all brass construction with nitrite bucket 1 +ö bsp thread at top cap and m12mm metric rod connection, rod and lock nut of stainless steel aisi 316 quality, piston rod length 750mm. The bottom cap and top cap must be fit tight (without the use of an o-ring) that during operation, the caps will not be loosened.
1. Production style: There are 8 kinds of steel fiber: flat head steel fiber, needle-flat steel fiber, corrugation steel fiber, undee steel fiber, micro-steel fiber, concave-flat steel fiber, stainless steel fiber. Also we can produce the fiber according to customer requirement regarding the diameter, length, shape and others 2. Length: 13-60mm 3. Diameter: 0.22-1.0mm 4. Tensile strength: 800-2500mpa 5. Standard: These products meet the requirements of astm a820 type i 6. Technical advantages: A. Easy dispersing, no balling and caking, distributing uniformly B. Greatly increased concrete ductility C. Greatly increased concrete tensile strength D. Increase anti-cracking E.Reduce the crack space F. Increase shear strength of component G .Increase shock-shear strength of slab - column structure H.Increase partial compressive strength I.Increase anti-earthquake and anti-blast J.Increase anti-abrasion and anti-cavitation erosion K. Increase prestressed unit anti-crack and bearing capacity L.Increase bending resistant, anti-shear fatigue m . Increase component shock strength 7. Economic benefits: A. Can extend the using life of project B. Can reduce the thickness of concrete and save the quantities of concrete under the same intensity C. Can take place of steel totally or partially D. Replace in concrete the traditional mesh reinforcement. E. Can reduce the workload of project, shorten the processing period, save the cost of project Packing :damp-proof poly bag, n.W 25kg/bag or 20kg/bag;40 bags/pallet or 50bags/pallet(1000kg/pallet), With plastic pellicle for out packing to protect the pallet or according to customer's requirements
Quick Details Place of Origin: Zhejiang, China (Mainland) Brand Name: Ehase-Flex Model Number: EH-TPC Material: Stainless Steel Technics: Non-Weld ,Intergral Flange Connection: Flange Shape: Equal Head Code: Round Product Name: Flange connection bellows compensator Application: Absorb the vibration and reduce the noise NominalBore: DN50-DN800 Working Pressure: 10Bar, 16Bar,25Bar Rating Temperature: Max 1000 â?? Flange Standard: JIS,ANSI,DIN,B.S.JB,ETC Test: 100% Tested with 1.5 Times Road OEM/ODM: Allowed Standard: EJMA Certificate: ISO Supply Ability Supply Ability: 80000 Piece/Pieces per Year HS Codet: 7307 99 Packaging & Delivery Packaging Details Carton Box, Pallet or Plywood Case; As Customer's Requirement No Unacceptable Packaging Material or Bamboo Products Been Used as Packing Port Shanghai or Ningbo or Any Port in China Lead Time : Quantity(Pieces) 1 - 50 >50 Est. Time(day) 10 To be negotiated Product Description Flange Connection Bellows Compensator Application  Used for pump to link with tube, absorbing vibration and reducing the noise. Integral flange makes strong and durable Construction Item Parts Material Remark 1 Bellows SUS304 SUS316/321 2 Flanges Q235B SS400/SUS304/316/321 3 Tie Rods S25C  4 Gaskets EPDM Natural Rubber Specification Nominal Bore Total Length Bellows O.D. Max Offset Working  Pressure mm ins mm ins mm mm bar 50 2 150 6 70 15 10 16 65 2 1/2 150 6 86.5 14 10 16 80 3 150 6 101.5 12 10 16 100 4 150 6 128 10 10 16 125 5 150 6 156.5 8 10 16 150 6 150 6 183.5 8 10 16 200 8 200 8 234 8 10 16 250 10 200 8 289 6 10 16 300 12 200 8 341 5 10 16 350 14 200 8 402 5 10 16 400 16 200 8 452 5 10 16 450 18 200 8 507 5 10 16 500 20 250 10 563 5 10 16 600 24 300 12 673 5 10 16 700 28 300 12 773 5 10 16 800 32 300 12 875 5 10 16 *Specification stated above are standard. We can design and manufacture according to customer's requirement. *Flange standard: JIS, ANSI, DIN, B.S., JB, etc Features 1. Excellent Welding Technology, like a fish swimming in water. 2. Omega Bellows, More flexible and longer service life. 3. All-in-one part construction, which can withstand greater pressure. Production Process Production Capacity Flexible Sprinkler Hoses: 350,000pcs per Month Flexible Joints/ Expansion Joints: 80,000pcs Annual Gas Connector: 300,000pcs Per Month Water Connectors: 5,000,000m Annual Testing 100% Before Delivery Packaging & Shipping Carton Box, Pallet, or Plywood Case NO Unacceptable Packaging Material or Bamboo Products been Used as Packing
Supplier: Geared Head Medium Duty Lathe Machine, Power Operated Hydraulic Press, Hydraulic Hacksaw/band Shaw, High Precision Surface Grinders, All Geared Milling, Slotting Machine, Precision Latter Machine, Horizontal Boring Milling ,Planning Machine, Radial Drilling Machine, Pillar Type Presses, Cnc Machine, Cnc Machine, Vertical Cylinder Fine Boring Machine (vcbm 2500),crank Shaft Grinding Machine (csg 2750),line Boring Machine, Two Wheeler Single Cylinder Honning Machine, Shapping Machine ,tool Cutter Grinder, Wood Turning Lathe, Wood Machine Work, Wood & Metal Cutting Band Saw Machines Gear Box (vertical), Circular Saw Machines Planner Machines, Sheet Metal Machinery, Over Shearing Machine, Under Shearing Machine, Press Brake" Machine , Cnc Press Brake Specification, Hydraulic Shearing Specification, C Type Power Press, H Frame Piller Type Power Presses