Polyethylene (Lldpe, Hdpe)

This product is a Linear Low-Density (Lightweight) Polyethylene LLDPE, These types of polymers typically have good tensile strength due to the type of molecular bond they have and can withstand a good amount of tension. LLDPE allows for enhanced mechanical properties, making it suitable for a range of plastic film and molding application. We offer these types of Linear Lightweight Polyethylene LLDPE , LL0209 AA , LLDPE LL0209 KJ , PE LLDPE 22b02

PE Granules High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material. Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature. We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.

High Density Polyethylene HDPE, used for production of various product such as plastic bottles, pipes, containers and more. We provide all types of High Density Polyethylene, HDPE 7000F , HMRCP 100N ( PE-100 ) , HFI 5110 , HF 4760 ( BL3 ) , MFI 3713, HD 52518 , HBM 5510 , HBM 4265 , HD 5000S , HD 60507

Explore the robust and versatile HDPE (high-density polyethylene) plastic offerings. Our colection includes a diverse array of HDPE product variants options tailored to meet your specific requirements.Each HDPE variant undergoes meticulous sourcing and rigorous quality assurance processes to ensure reliability and performance. Trust Gremlog Trading DMCC to deliver premium-grade high density polyethylene plastic , facilitating sustainable solutions and contributing to a circular economy

HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %

Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.

Application: DS7601 application on PP, textiles, fabrics. Composition: Polypropylene synthesis Pipe grade