Zhr Rubber Slurry Pump

Series lrh slurry pumps are cantilevered, horizontal, centrifugal with double casings. They are designed for the handling of highly abrasive, high-density slurries. Structure: the wet parts of this pump are made of natural rubber, which could be replaceable wear-resistant parts. The discharge side can be oriented to any of the eight different positions. The shaft seals may adopt packing gland seal, expeller seal and mechanical seal. Application: series lrh slurry pump mainly applies in the metallurgy, mining, coal washery, power plant, building material and other industries. This pump can be installed in multistage series.

Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings. 10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries, 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.

Slurry Pump Spares in S42 Rubber are widely used for Chemical fertilizer plant, Chemical, gold, copper, nickel, tar etc.industry,because S42 is a kind of neoprene rubber has good physical and mechanical properties and high tensile strength, acid and alkali resistance, Chemical reagent resistance, good resistance to inorganic acid and alkali corrosion. Slurry pumps from Tobee are manufactured in a number of materials, to suit a wide range of operating conditions. Elastomeric materials, including natural rubber, synthetic rubbers and polyurethane offer unique combinations of erosion wear resistance and chemical resistance and are suitable for use in many slurry pump applications.

40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. 40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available. Tobee 40PV-SP Vertical Slurry Pumps Performance Parameters: Size: 40mm Capacity: 19.44-43.2m3/h Head: 4.5-28.5m Max. power: 15kw Handing solids: 12mm Speed:1000-2000rpm Submerged length:900-2500mm Materials:High chrome alloy, Rubber, Polyurethane etc.

40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. 40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available.

40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. 40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available. Tobee 40PV-SP Vertical Slurry Pumps Performance Parameters: Size: 40mm Capacity: 19.44-43.2m3/h Head: 4.5-28.5m Max. power: 15kw Handing solids: 12mm Speed:1000-2000rpm Submerged length:900-2500mm Materials:High chrome alloy, Rubber, Polyurethane etc.

40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. 40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available. Tobee�® 40PV-SP Vertical Slurry Pumps Performance Parameters: Size: 40mm Capacity: 19.44-43.2m3/h Head: 4.5-28.5m Max. power: 15kw Handing solids: 12mm Speed:1000-2000rpm Submerged length:900-2500mm