It is an aliphatic polyurethane resin based, high UV resistant, two component, solvent based, semi-gloss top coat floor paint. It is a water impermeable, chemical resistant, impact and friction resistant, easy to clean, hygienic, two-component paint used indoors and outdoors.
FEATURES Excellent Gloss & Gloss retention, excellent color / non yellowing characteristics High viscosity, medium Tg and high molecular weight / good drying and forms hard and moderately flexible film Excellent pigment wet ability and good resistance to detergents and soaps. APPLICATIONS As a decorative and quick drying paints. Industrial quality quick drying paints / as acrylic topcoat for textured paints. Road marking paints / for pavements / kerb stones / pathways. clear lacquers for PVC leather cloth / over lacquering and Metallizing / coatings for electronic equipment like TV / video and similar items. Scratch resistant protective coats and polycarbonate glazing. CHARACTERISTICS Type of Resin A composition of solution polymerization Solvent Xylene Solids 60 +/- 1% Viscosity(Gardner Tube @25o C) Z2 - Z4 Acid Value < 10 mg KOH Color (Gardner) Water white (0.1 max in Gardner) Clarity Clear COMPATIBILITY DATA Long Oil / Medium Oil / Styrenated Alkyd Incompatible polyols Limited Cellulose esters Good Chlorinated rubber Good Vinyl resin Good SOLUBILITY DATA Hydrocarbons Xylene / Toluene: Soluble Mineral Spirits Limited Alcohols Soluble Esters Soluble Ketones Limited Long Oil / Medium Oil / Styrenated Alkyd Incompatible DELIVERY FORM DETAILS (50% XYLENE) Packing: 190 Kgs / net: 200 Lit Mild Steel Drums SHELF LIFE Minimum 12 months when stored under ambient storage conditions.
Wet-on-wet application with 3 minutes flash off time. * Single baking at 130 C for 25 min. High productivity & Low production cost. * Recommended for welded areas as the composite system at 40-60 (Primer + Topcoat) gives minimum Salt Spray life of 240 Hrs.
1 k dyo - pox primer It is used as air drying primer on iron and steel surfaces and also light metals. Air drying syntetic, oven drying topcoat can be applied. Drying specifications: Thorough drying 20 mins. At 20 c degrees Hard drying 72 hours at 20 c degrees Packaged in 22 kg cans.
High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat. PROPERTIES Colour : Aluminium Solids : 40% Theoretical Coverage 10 â??12 m2/lit @ 25u DFT DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 +/- 2% Flash point: 38�°C
Special Features : Water based paint, excellent workability. User and environment friendly. Displays the Green Badge of the Israeli Standards Institute. Uses : SUEDE is used to create a suede-like effect on walls. One of the 'Effects in Color', water based paints series. Easy application. Suitable for interior walls. Available in five fashionable shades, suited to the unique texture of this effect. Painted object : Walls Paint Type : Topcoat Package Size : 5 lit Gloss : Matt Calculated spreading rate [min] : 2.0 m2 Calculated spreading rate [max] : 3.0 m2 Touch Dry [max] : 30.00 h Waiting Between Coats - Hours : 1.0 Finnal Drying : 24 Thinner : Water Cleaning Thinner : Soap and Water Shelf life (months) : 24 * Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor. ** Drying time at 25 deg. C and 65% relative humidity
It is mainly used for anticorrosion and decoration for steels like various C-type steel, H type steel, Z type steel, outdoor handrail, etc; featuring large area application, good color, primer-topcoat combination, reducing construction operations, high performance price ratio, thinning after adding water, environmental friendly, no harm.
Description Two-component acrylic aromatic polyurethane finish coating Recommended Use :- This product is a topcoat along with recommended undercoats for use in chemical plants, fertilizer plants, petrochemical and pharmaceutical complex, power plants, cement plants, steel plants, heavy chemicals and off-shore and on-shore industries. It is recommended for very high chemical resistance and for areas not exposed to direct sunlight. Product is also recommended for application over suitable primer for OEM industry. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 ± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 µ FLASH POINT : Base : Above 23 C Hardener : Above 23 C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 DAYS. SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation The surface of primer or intermediate coats, over which this product is applied as topcoat, should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Description Two-component Air Drying Acrylic Aliphatic, Non Yellowing polyurethane finish coating. Recommended Use :- This product has excellent weathering resistance additionally it offers excellent resistance to various industrial chemical fumes and splash. This product is recommended as topcoat with suitable primers and undercoats for use in High Chemical & Saline atmosphere for better aesthetics and corrosion resistance in Chemical, Fertilizers, Petrochemical, industrial plants and also for premium industrial equipments. Not recommended for immersion application. Physical Data COLOUR : Industrial Shades FINISH : Glossy / Semi-glossy SOLIDS BY VOLUME : 40 + 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr @ recommended DFT of 30 FLASH POINT : Base : Above 23 C Hardener : Above 23C DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base: Hardener - As per our recommendations APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : Type 290 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30- 40 . OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Description Two component air drying aromatic polyurethane finish coating Recommended Use :- It is recommended as topcoat for Original Equipment Machines, Hygienic, Maintenance painting where mild chemical resistance along with good abrasion resistance and decorative finish are required. Sometimes it is recommended as undercoat of finish coats application for economic benefits. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 30C DRYING CHARACTERISTICS : SURFACE DRY :20 - 30 minutes (At 30C and 65% Relative humidity) HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a Topcoat, which is applied over underneath primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 followed by solvent wipe for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
