BBO Crystal (Beta-Barium Borate Crystal)
BBO crystal is an important nonlinear optical crystal with combination of unique optical properties. Broad transmission and phase matching ranges, large nonlinear coefficient, high damage threshold and excellent optical homogeneity provide attractive possibilities for various nonlinear optical applications.
UPT offers BBO specification:
LBO Crystal (Lithium Triborate Crystal)Note: OEM Dimension, different axis angle cutting and coating and damage threshold upon request others are available upon request.
LBO crystals is an excellent nonlinear crystal. For frequency doubling(SHG),tripling(THG) of Nd:YAG,Nd:YLF,Nd:YVO4 lasers, it is one of the most useful nonlinear optical materials in ultraviolet and visible laser applications.
Advantages:
broad transparency range from 160nm to 2600nm (see Figure 1);
high optical homogeneity (n10-6/cm) and being free of inclusion;
relatively large effective SHG coefficient (about three times that of KDP);
wide acceptance angle and small walk-off;
type I and type II non-critical phase matching (NCPM) in a wide wavelength range;
spectral NCPM near 1300nm.
high damage threshold(18.9 GW/cm 2 for a 1.3ns laser at 1053nm);
LBO has the highest damage threshold in all the commonly-used inorganic NLO crystals. Therefore, it is the best candidate for high average power SHG and other nonlinear optical processes.
SHG, THG of Nd lasersLBO's main applications
SHG of Ti:Sapphire, Cr:LiSAF and Alexandrite lasers
OPA and OPO
UPT offer LBO specification:
Note: OEM Dimension, different axis angle cutting and coating and damage threshold upon request, others are available upon request.
Lithium triborate (lbo) crystal, due to its high damage threshold, wide angular acceptance, relatively small walk-off and non-critical phasematching capability to generate second harmonic with no walk-off, has become a material of choice for generating harmonics in solid state lasers. Core optronics offers shg and thg, ar coated lbo crystals with high damage threshold and longterm stability. Attractive prices directly from factory. Our capabilities include: Growth of pure, ultra low absorption lbo crystals Precision crystal surface cutting Perfect surface grinding and polishing We use ion beam sputtering for deposition of dielectric antireflection (ar) coatings. Years of experience in thin film r&d and over 7 years of innovation in crystal growth and optical fabrication These combined capabilities result in superior performance of our lbo products, developed for high power dpss and lamp pumped lasers. Our lbo specifications: Material: lbo, other on request Coating technology: ibs with in-situ ion beam sputter cleaning Coating spectral range: 200 to 2000nm Damage threshold: >1gw/cm2 @ 10ns, 10hz, 1064nm, >400mw/cm2 @ 10ns, 10hz, 308 nm Reflectivity: Vvv coating:
Basic parameter Chemical Formula KD2P Curie temperature 222K Symmetry 42m Density 2.355g/cm3 Absorption 0.005/cm Extinction ratio 1:10000 Deuterium ratio 98.05%--99.05% Transmission band 200-1600nm Non-linear coefficient d36=0.40pm/v Longitudinal half-wave voltage 2.98KV(I=546nm) Electric resistance >2x109ª+¿Mcm Electric-optical coefficient r41=8.8pm/v,r63=25pm/v . Application Designation Operation Input Output 53.7 íp SHG (II) 1064 nm 532 nm 59.5íp THG (II) 1064 nm + 532 nm 355 nm 63.7íp SFM (II) 1064 nm + (421-1000 nm) 302-515 nm 86íp FHG (I) angle tune 532 nm 266nm 90íp FHG (I) temp. tune 532 nm 266 nm 36.6íp SHG (I) 1064 nm 532 nm 46.8íp THG(I) 1064 nm + 532 nm, 355 nm . Specifications Wavefront distortion: less than l/8 633nm Dimension tolerance: (W 0.1mm) x (H 0.1mm) x (L + 0.2mm/-0.1mm) Clear aperture: > 90% central area Flatness: l/8 633nm Scratch/Dig code: 10/5 to MIL-O-13830A Parallelism: better than 20 arc seconds Perpendicularity: 5 arc minutes Angle tolerance: qD 0.3, fD 0.3 Quality Warranty Period: one year under proper use .
We specialize in producing KD*P(DKDP) electro-optical crystals with high deuterium,high quality and large caliber.In virtue of our novel technique of crystal growth ,the stability of crystal quality and yield is insured.We provide any size of semi-finished KD*P crystals on request .And our products are recognized by the European and American markets. KD*P crystal is in stock. You are welcome to contact us for more information. Basic parameter: Chemical Formula KD2P Curie temperature 222K Symmetry 42m Density 2.355g/cm3 Absorption 0.005/cm Extinction ratio 1:10000 Deuterium ratio 98.05%--99.05% Transmission band 200-1600nm Non-linear coefficient d36=0.40pm/v Longitudinal half-wave voltage 2.98KV(I=546nm) Electric resistance >2x109 Mcm Electric-optical coefficient r41=8.8pm/v,r63=25pm/v . Specifications: Wavefront distortion: less than l/8 633nm Dimension tolerance: (Wf+ 0.1mm) x (Hf+0.1mm) x (L + 0.2mm/-0.1mm) Clear aperture: > 90% central area Flatness: l/8 633nm Scratch/Dig code: 10/5 to MIL-O-13830A Parallelism: better than 20 arc seconds Perpendicularity: 5 arc minutes Angle tolerance: qD
Basic parameter: Chemical Formula KD2P Curie temperature 222K Symmetry 42m Density 2.355g/cm3 Absorption 0.005/cm Extinction ratio 1:10000 Deuterium ratio 98.05%--99.05% Transmission band 200-1600nm Non-linear coefficient d36=0.40pm/v Longitudinal half-wave voltage 2.98KV(I=546nm) Electric resistance >2x109¼++Mcm Electric-optical coefficient r41=8.8pm/v,r63=25pm/v . Application: Designation Operation Input Output 53.7 fp SHG (II) 1064 nm 532 nm 59.5fp THG (II) 1064 nm + 532 nm 355 nm 63.7fp SFM (II) 1064 nm + (421-1000 nm) 302-515 nm 86fp FHG (I) angle tune 532 nm 266nm 90fp FHG (I) temp. tune 532 nm 266 nm 36.6fp SHG (I) 1064 nm 532 nm 46.8fp THG(I) 1064 nm + 532 nm, 355 nm . Specifications: Wavefront distortion: less than l/8 633nm Dimension tolerance: (Wf+ 0.1mm) x (Hf+0.1mm) x (L + 0.2mm/-0.1mm) Clear aperture: > 90% central area Flatness: l/8 633nm Scratch/Dig code: 10/5 to MIL-O-13830A Parallelism: better than 20 arc seconds Perpendicularity: 5 arc minutes Angle tolerance: qD
Supplier: Polarizing beam splitter cubes, wave plates, glan polarizers, BBO, LBO, KTP, KTA, ND, YVO4, diffusion bonding crystals
OST Photonics offers various functional crystal materials for laser systems, optical equipment and instruments. Crystals are divided into six types according to their functions: laser crystals (diffusion bonding crystals, Nd:YAG, Er:YAG, Yb:YAG, CTH:YAG, Nd:Ce:YAG, Nd:YVO4, Nd:GdVO4, Nd:YLF, Pr:YLF, Ho:YLF, Tm:YLF, Ti:Sapphire, Er:Yb: Glass), nonlinear crystals (KDP & DKDP), KTP, LiNbO3, LBO, BBO, BIBO), passive Q-switch crystals (Cr4+:YAG, Co2+:MgAl2O4), birefringent crystals (YVO4, �±-BBO), Magneto-optic Crystals (TGG) and optical crystals (BaF2, CaF2, MgF2, LiF, Germanium single crystal, Sapphire (Al2O3), YAG, ZnSe, Silicon single crystal, ZnS). If you want to know more about our functional crystals, please do not hesitate to contact OST Photonics. What are Functional Crystals? A wide range of functional crystal materials is used in various optical applications. While optical glass is commonly used as a transparent material, different functional crystal materials, primarily monocrystalline materials, are required for diverse applications due to their unique functionalities: In contrast to glass, birefringent crystals can exhibit birefringence, which is a requirement for various types of polarizers, wave plates, birefringent tuners, and other optical components. Commonly used birefringent crystal materials include YVO4, �±-BBO, quartz, calcite and sapphire. The lattice symmetry of a crystal material is not too high (such as a triangular, quadrilateral, or single prism), and it can exhibit nonlinearity. Nonlinear crystals are primarily used for nonlinear frequency conversion but also find applications in optical modulators like the Pokel cell. A wide variety of functional crystal materials can be used as laser crystals, serving as host materials for laser-active dopants (rare earth ions or transition metal ions). They typically exhibit relatively high transition cross sections, small gain bandwidth, and good heat conduction compared to laser-active glasses. In general, they also allow for higher doping concentrations. In some cases, functional crystal materials are used in spectral regions where glass does not have a wide enough wavelength range and high transmittance. In particular, various materials such as zinc sulfide (ZnS), zinc selenide (ZnSe) and Sapphire (Al2O3) are used as infrared crystals, and other materials such as lithium fluoride (LiF), calcium fluoride (CaF2) and magnesium fluoride (MgF2) are used as ultraviolet crystals. Some functional crystal materials, such as terbium gallium garnet (TGG), exhibit the Faraday effect (polarization rotation caused by magnetic fields), and they can be utilized in devices like Faraday rotators and Faraday isolators.
Supplier: Artificial nlo crystal and laser crystal, including KD*P, KTP, BBO, ND:YAG
Supplier: Optical and crystal components like polarizer, waveplate, prism, lens, windows, mirror, beamsplitter, PBS, BBO, KTP, ND: YAG, ND:YVO4
Rochon Polarizers Rochon polarizer is made of two birefringent material prisms cemented or optically contacted together. The Rochon prism was invented by and is named after Abb Alexis Marie Rochon. It is in many ways similar to the Wollaston prism, but the ordinary ray passes through the prism undeviated. Any separation angle can be designed according to request of customers. Features Multiple Polarization Materials Available Ordinary Rays Pass Through Undeviated Extraordinary Rays Deviate Photonchina Specifications Material: a-BBO, Calcite, YVO4,Quartz,MgF2 Wavelength Range: a-BBO 190-3500nm,YVO4 500-4000nm Quartz 200-2300nm Calcite:350-2300nm Extinction Ratio: Quartz