Spool With Teflon Lining

1. The product is made of 100% polytetrafluoroethylene resin material with high-quality temperature resistance (-196 ~ 260C), corrosion resistance, hydrolysis, oxidation resistance and other properties. 2. In the process of using this product, please do not use open fire to burn in order to avoid the generation of harmful gas to human body. 3. According to the requirements of the standards of China industrial textile industry association (T/ cnta05101-2018) and international practices, the products of our company use "dtex" (cent) as the main measurement unit of linear density. Dtex refers to the mass of a certain unit length (G/L).Another unit of linear density commonly used in the industry, "den" (Daniel), refers to the mass of 9000 meters in length, so the relationship between the two is: 1den = 0.9dtex. 4. The single strand of this product is manufactured by extruding process, with circular diameter, uniform and full trace, small shrinkage, stable elongation and large continuous length (the maximum weight specification of 1350dtex conventional line is 1000g/spool and continuous length is 7500m), which is suitable for high-speed sewing machines.In addition, in order to enhance the fastness of stitching, our company is also equipped with 1650dtex (1500D), 2000dtex (1800D), 2650dtex (2400d) for bag top, bag bottom and other special specifications. 5. In order to ensure the fastness of sewing, this product is made of "this long filament" without any bonding and stitching methods. The length of sewing thread is artificially increased to ensure the safety of sewing thread and the safety of filter bag. 6. Polytetrafluoroethylene (PTFE) has a very strong self-moistening property and a very low friction coefficient. If there is needle jumping during sewing, appropriate silicone oil can be coated on the sewing line. 7. Due to the particularity of the manufacturing process and the difference in relative density (quality) at both ends of the line, the line density (fineness) and strength of the product are within 10% of each other. 8. PTFE is a non-petrochemical product, which is manufactured as non-renewable mineral resources with high value. Please pay attention to the economical use;The product waste is not degradable and will cause environmental pollution if discarded at will. Please collect and recycle it by a professional company. Do not mix it with ordinary garbage and burn it.

PTFE Adhesive Tapes PTFE Fiberglass Adhesive Tapes PTFE skived fim tape is another type of PTFE adhesive tapes, which is skived into even thin film from a cylindrical PTFE block. During the skiving, the block was fixed and rotate with a high speed, and the sharp blade will shave it into even thin film on a continuous basis. Product Description Color: Grey Popular Thickness: 0.13mm 0.18mm Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Process of PTFE skived film tapes manufacturing: Once the PTFE film has been skived from the PTFE(Teflon) block, it will be chemically treated or etched, which will remove the fluorine surface by creating a new sodium surface. Then the heat resistant adhesive will be allowed to bond PTFE film, resulting in PTFE Skived Tapes. Difference of PTFE skived film tapes: PTFE Skived film tape and self adhesive PTFE tape can both resist heat, has non stick surface and is chemical & UV resistant. But due to PTFE skived film is 100% Pure PTFE, so the property is different. The PTFE skived tapes is more thinner, usuall used for electronics industry, Application of PTFE skived film tapes: Its high elongation makes the tape useful in applications that require conformability. The combination of skived PTFE and silicone adhesive offers an effective solution in high temperature and high dielectric applications. Techbelts Skived PTFE tape provides superior wear resistance, low friction and a non-stick surface. Applications Areas of use include mechanical applications such as electrical insulation and cable wrapping, bellows and hose liners, gaskets, tank and vessel lining, slide bearings, skid ways, pipe support and bearing tape. They are also used in many other applications requiring high temperature resistance, low friction and a non stick surface. involved in the manufacture of PTFE coated fiberglass fabric, PTFE adhesive tapes, PTFE mesh conveyor belts, and silicone coated fabric etc, which provides a new solution for various industrial machines, such as packaging, printing, textile and dyeing industries.Click here to subscribe

High Temperature PTFE Teflon Fiberglass Coth Tape,PTFE (Teflon)Coated Fiberglass Tapes with silicone adhesive backing is made from a very tightly woven fiberglass cloth that has been heavily coated with PTFE/(polytetrafluoroethylene) and has a high-temperature, pressure-sensitive silicone adhesive applied to one side. It has a lower bonding strength than the same type which is acrylic adhesive, but a higher temperature range. It has two types: one has lining, the other hasn`t. Features: The using temperature is between -60ºC -260ºC, weather-resistant & anti-aging. Non-Adhesive: The surface is smooth, not easy for adhesion. Easy to clean the surface oil, stain, or other attachments. Resistant to strong acid, alkali and various kinds of organic solvent and chemical etching. Non-toxic, drug resistance. Almost resistant to all pharmaceutical items. Good insulation, prevent ultraviolet, anti-static. Fire retardant. Resistant to tearing, puncturing and abrasion. Easy to use, long service life. Applications: All kinds of high temperature of roller coated, heating plate, off- membrane, thick liquid yarn machine' off-membrane drum, thermoplastic demoulding and other off-membrane industries. Food, dairy products, pharmaceuticals of plastic film bags hot sealing pressure sticky. The sliding channel, hopper, aviation mould etc liner paste. Suitable for other places which need anti-metal and keeping a smooth part E: Corrosion resistance and high temperature resistant surface treatment As insulating liner, insulation parts of the insulation encapsulation etc. Used for various fine pressure roller coated machine, the surface of laminating content These product properties are suggestive and all products can be customized or converted to fit specific application requirements. Please contact us to discuss your unique application needs.