Temperature Data Logger

Model no S266 The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly. Advantages Quad band 850/900/1800/1900Mhz GSM GPRS Module inside; 3G UMTS/HSDPA/4G Modules are optional.; 32 bit MCU, reliable performance with in-built watchdog; Support temperature & humidity monitoring remotely in real-time; Support 8 channel temperature input interface(DS18B20 Temperature sensors); Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC; High/Low Alert via SMS/Call/GPRS; Supports 1 DNS or IP address as server; Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network; Automatically resend the data while communication failure, GPRS failure will alert by SMS text; Supports remotely restart the device, and configure it by SMS commands remotely; Up to 10 user's phone number to receive alarm and daily report SMS/Call; Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers; In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation; In-built internal clock, support 11 actions on schedule at pre-set time; Internal 16MB memory, logs more than 200000 records; Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm; Support Android/IOS APP, easily & friendly for use/config. Support remote upgrade the firmware via PC. Can be operated from anywhere, no distance limitation; Secure - Using caller ID and password for identification, unknown callers are ignored;

We TechnicalProducts have attained a commendable position in the industry for offering the finest quality range of electronic products. We deliver our products within the promised time frame. Our client-centric approach allows us to offer these products at industry leading prices. Temperature data logger distributor in India/data logger gl2000 is one of our main product.

Model:S273 Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers) The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. 4G SD card for save historical data, USB port for configuration and upgrade firmware; 4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 4 Relay outputs, 5A/30VDC,5A/250VAC; 6. 8 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection; 9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert; 11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC; 12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 13. Supports remotely restart the RTU, and configure it by SMS commands remotely; 14. Supports over voltage protection and phase-reversal protection; 15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.

Model: S262 S263 Name: GSM GPRS 3G Data Logger The GPRS 3G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. 1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2. Programmable by SMS Commands or PC Configurator via USB; 3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6. Daily report, schedule upload, event upload; 7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10. Internal memory, can save the historical data for review; 11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12. Rechargeable Backup Battery inside can last 18hours; 13. Standard DIN Rail 35mm installation or outdoor enclosure.

Temptale Ultra USB Temperature Datalogger - USED CTS000035

daq modules and standalone systems with 48 channels and 1sec sampling rate

Serial Data Logger is an easy to add data storage to any device or system. The SDL-01 is a compact, rugged device that captures data from any device equipped with a serial port and stores it in FAT16 to FAT32 compatible files on a Secure Digital card. It also has an USB port with standard Mass storage driver, which can emulate the device as USB pen drive, for retrieving the files. Features: • Low-power consumption • Low-cost • Built in RTC • Standalone unit • USB Mass storage Port • Industrial real-time export capabilities. • Support text, raw, binary data and protocols • Use any baud rate, number of data bits or stop bits, parity, hardware and software flow control. • Programming is not required to configure the software to collect data.

Name:Serial to Wifi/Ethernet Converter (RS232/485+RJ45) Model:WF-01 WF-01 is a wireless networking router, which is used for project of RS232/RS485 serial equipment to WIFI or Ethernet networking. WF-01 provides a serial port to WIFI function, can be RS-232/485 converted into a TCP/IP serial network interface, RS-232/485 serial port and WIFI/ Ethernet bidirectional data transparent transmission.The serial device can transfer the data to TCP/IP network interface connect to the network for data communication, communication extended the range to serial device greatly! 1.Can use as a Router; 2.Support Hardware AP, HTTPD Client and WEB IO; 3.Suport TCPB Function; 4. Fast Access WiFi; 5.Support hardware flow control (RTS/CTS) RS232 interface, male mouth(needle) consistent with computer pin definition; 6.RS232 RS485 automatic switching; 7.Support Webpage Configuration; 8.RJ45 network connection, support wired Ethernet transmission; 9.Rich status indicator light: Power/Ready/Link/RXD/TXD; 10. Reload button, do not worry incorrect settings(in working status, press the button 3s then it load to default settings and automatic restart); 11. Design with positioning hole, convenient installation; 12.Highest support baud rate 460800 bps; 13.Optional TCP Server/TCP Client/UDP Client/ UDP Server mode, the TCP Server mode can support up to 32 Client connection; 14.Multiple applications for data transmission from wired to wireless.

Name:Modbus TCP Ethernet Remote IO Module (4DI+4DO+RJ45+RS485) Introduction: The M120T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports 1~300KHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 4 digital outputs, supports 1~300Khz high speed pulse output or relay outputs, 2 channel 12bits analog outputs, supports 0~10VDC signal output. The M120T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. he M120T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements. Features: 1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection; 3. Embedded Web server for configuration and management; 4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol; 5. 4 optical isolated digital input, supports 1~300KHz high speed pulse counter; 6. 4 digital output or relay output, supports 1~300KHz high speed pulse output; 7. 4 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC,0-10VDC; 8. 2 analog output, 12-bit resolution, supports 0-10VDC 8. High sampling frequency and special filtering strategy to ensure reliability; 9. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules; 10.Supports register mapping function and extend I/O inquiry strategy; 11. Provides 1 channel 12`36VDC power source output for external device, saving wiring cost; 12. LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 13. Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 14. Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.