Product Description
Winner3008B is intelligent dry laser particle size analyzer, manual and full automatic operation model. MIE scattering principle as basic, Converging light Fourier transform light path, Highly stable He-Ne laser and High sensitive ring photoelectric detector,guarantee good repeatability and accuracy.
It uses air as dispersion medium, and uses turbulent dispersion principle with High precision feeding device, patent powder spray pump and oil-free silent gas source guaranteeing the samples to be fully dispersed. Itâ??s fit for any dry powder materials, especially the powder that takes chemical reaction with water or changes its shape in liquid. Compared to the wet laser particle size analyzer, Itâ??s with the same accuracy and repeatability.
Main Features
(1) Advanced testing optical path.
Converging light Fourier transform light patented technology, make scattering light not be restricted to lens aperture. Use main detector and large angle auxiliary detector efficiently collect all angles of scattering light in the testing range, ensure good testing accuracy and reliability in the whole range.
(2)Scientific dispersion system
Turbulence dispersion patented technology and Normal shock shearing effect, make particles sufficient dispersion, Adopt wearable ceramics improve dispersion systemâ??s working life.
(3)Human-based operation mode Manual and Full automatic, easy choose.
(4)High precision-automatic optical path calibration system
Itâ??s composed of precise four phase hybrid stepper motor, Its inching precision is reach to micron level, so light path is always in a good state.
(5)Intelligent data analysis-winner unique software support
Analysis software collect large quantity of particle information in high speed, and inverse particle distribution by unconstrained free fitting technology, then intelligent statistics and analysis of testing data, ensure accuracy and repeatability of the output.
(6) The results not only show particle distribution,the cumulative value curve and typical particle sizes( D10, D50, D90.), but also support user-defined analyze result, such as any features particle diameter from D0 to D100,Cumulative percent(bigger than or less than a certain particle diameter).
(7)Users can design the test report output and display forms according to industry requirements.
Specification
Model
Winner3008B
Standard
ISO 13320-1:1999ï¼?GB/T19077.1-2308ï¼?Q/0100JWN001-2013
Measuring Range
0.1-2000�¼m/0.1-1200�¼m
Channels Number
100/97pcs
Accuracy
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Winner2000ZDE is an intelligent laser particle size analyzer, perform auto test, auto alignment, auto water supply, auto drainage, auto bubble removing, auto ultrasonic dispersion, auto cleaning etc., really realize one-key operation. It adopt full built-in sampling system, effectively prevents large particles sedimentation problems in the circulation pipeline, ensure good accuracy. It adopts comprehensive Laser diffraction particle size measurement principle with highly sensitive ring photoelectric detector improving the test accuracy greatly, Original designed unconstrained free fitting software technology, a true reflection of the particle size distribution, to ensure truth and accuracy of the test results. Therefore especially suits the laboratories of enterprises, colleges and universities and research institutes to use. 1.Main Specifications: Model Name Winner2000ZDE Standard ISO13320-1:1999, GB/T19077.1-2008, Q/JWN001-2009 Principle MIE scattering principle Measuring Range 0.1-300μm Channels Number 39 Accuracy 25000hour Wet Dispersion Method Ultrasonic Frequency:40KHz Power:35W, Time: �1S Stir Revolutions Speed: 0-3000RPM (Adjustable) Circulate Rated Flow:8L/min Rated Power:10W Sample Pool Volume:350mL Sample cuvette Volume: 10mL ( Available) Operation Mode Full automatic and manual control, freely choose Output parameter D10,D50,D90,D100,S/V referent parameters Optical Calibration System Full automatic Test Speed
Laser cutting (84561000)
POM regrind black color full container available POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin: High hardness Bearing good Low friction number High resistance to abrasion High temperature resistant Less water intake Has anti-static ability Dimensional stability, little change Less smoke burns when burning High glossy surface High crystallization In addition to the priority points, POM plastic also has some limited formats such as: Quality acid resistance and alkali High hatch rate when changing secretions Operation mode Heat range MATERIAL: POM regrind black color full container available CATEGORY: POM TYPE: Regrind GRADE: Black color SPECIFICATION: 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Product Description Winner2005B intelligent full automatic laser diffraction particle size analyzer with MIE scattering theory to precisely test the particle size distribution from 0.01/0.1�¼m to 1000�¼m. It adopts dual laser beam and built-in sample preparation system, Intelligent operation, very simple to use for engineer, offer accurate and reliable data,built-in side wide-angle detector, make sure get 0.01 micron particles scattering angles. Specification Model Name Winner2005B Standard ISO13320-1:1999ï¼?GB/T19077.1-2008ï¼?Q/0100JWN001-2013 Principle MIE Scattering Principle Size range 0.1�¼m-1000�¼m Photodetectos 87 pcs Accuracy â?¤0.5% (Deviation of D50 on national standard sample) Repeatability â?¤0.5% (Deviation of D50 on national standard sample) Laser Semi conductor Laser �»= 636.5nm, p>2mW Service time>25000 hour Wet dispersion Ultrasonic Frequency:40KHz Power:35W, Time: â?¥1S Agitator Revolutions Speed: 0-3000RPM (Adjustable) Circulation Rated Flow:8L/min Rated Power:10W Sample tank Volume: 350mL Operation mode Manual and Full automatic Optical alignment system Full automatic optical path alignment system Software function Analysis mode Free Distribution, R-R Distribution, Logarithm Normal Distribution, Mesh number classification etc. Statistic Method Volume Distribution, Quantity Distribution Statistic Comparison Several Testing Results of samples Different batches of samples testing result, Samples before and after processing, Test result of samples in different time. User-defined Analysis Figure out percentage according to the particle size Figure out particle size according to the percentage Figure out percentage according to the particle size range Meet demands of representation of particle test in different industries Test Report Word, Excel,Photo( Bmp), Text etc Multiple-language Support Multiple language Support Intelligent operation Automatically control water inflow, dispersion,test and analysis.Better Repeatability after remove human-factor Report Items Particle size distribution table&graph, average diameter, Median diameter, SSA, etc. Testing speed
Our organization is offering an astonishing range of Laser Cutting Services. Offered array of services is rendered according to quality norms. In addition to this, offered services are much admired due to their hassle free management, on-time execution, and client-focused approach. Materials We Cut: Stainless Steel, Brass, Copper, Aluminum Mild Steel, Carbon Steel, Galvanize Steel We benefit our customers with: Our Laser Cutting-Bending software are qualified to handle any complicated shape with less process time and high accuracy with zero tooling cost with prompt services in low/high (Bulk) Quantities Supply. We look forward to business association with you for long term. We offer economical rate in volume business tie up
Model AK1325F Laser power Wuhan Raycus fiber 20W/30W/50W/100W Cooling system Air cooling Working area 1300*2500mm Control software Taiwan Markingmate2000 Scanner head Beijing sino-galvo with red point Power-supply Taiwan MEAN WELL(USA) Field lens Nanjing Wavelength Working table PVC adjusting table Transmission system XY axis gear transmission, Z axis Taiwan TBI ballscrew transmission Laser Wavelength 1060nm Response time 0.5ms Frequency of pulse 20-100KHz Max marking depth 0.8mm Marking speed 7000mm/s Marking lines 1-10 lines(in the marking area) Minimum line width 10 micron Minimum character 0.15mm Repeatability accuracy �±0.002mm Resolution ratio 0.1mm Marking content Text, pattern, date, bar code, etc Operation system Microsoft Windows XP Graphic format supported bmp, jpg, gif, tga, png, tif, ai, dxf, dst, plt, etc. Operation temperature 5 -40 Relative moisture 90%, no fog Supply Voltage 220V/50Hz/10A Package Standard shipping export plywood case with reinforced type.
Main features. 1. Moved crossbeam with imported high precision racks and linear guide rail, transmission stable, working with high precision. 2. Machine tool, crossbeam and worktable adopt integral welding structure, machine tool, crossbeam and worktable adopt integral welding structure, in accordance with the standard large machine, to stress annealing after precision finishing and then for vibration aging treatment, it can completely eliminate the welding stress and processing stress, keep high-strength, high precision, and also keep the 20 years of normal use don't deformation. 3. X, Y and Z axis use imported Japan servo motor, high precision, high speed, large torque and large inertia, performance is stable and durable, ensure the high speed operation of the whole machine. 4. Based on Windows operating system, use professional Bochu cypcut numerical control system for fiber laser cutting machine, integrated with laser cutting control special function module which is powerful with a good man-machine interface and easy to operate. 5. Laser-produced without gas, it could use air to cut sheet metal.
Main features. - High speed, high precision, high efficiency and low cost. - Easy to operation, fiber optical path, without tediously adjustment on optical path. - Compact structure, good sealing, strongly adaptable to changes in the environment. - With the perfect automatic nesting system which can save time, save the materials, the sheet utilization ratio up to 95%. - Moving crossbeam, imported high precision racks and linear guide rail, stable transmission, high precision. - Using professional and powerful Shanghai Cypcut fiber cutting controlling system that based on Windows operating system, withgood Human Machine Interaction and easy operation. - Laser is produced without gas and it could use air to cut sheet metal. - Machine frame, crossbeam and worktable adopt integral welding structure. With stress relief annealing and vibration stress relief treatment, it can completely eliminate the welding and processing stress, maintaining high strength and precision, keeping the normal use of 20 years without deformation.
