Supplier: Process control instruments, electrical instruments, dimension instruments & validation facility like autoclave, bung processor, dry heat sterilizer, eto sterilizer, humidity mapping, tunnel, lyophilize, temperature mapping, clean room validation (hvac) also many more special type of instruments
Model no.: sf-104a
Feature: same as sf-104s (besides built-in relays and transformer)
Digital temperature controller
For fan cooling freezers & cold rooms of low temperature
Waterproof panel
Manually=automatically defrost by electric heater
Evap. Fan control
Time/temp.Setting to end defrosting
Re-start delay
Parameter locking
Celsiuc / fahrenheit degree selection
Buiit-in transformer and relays
Range:4545¦(40120h)
Accuracy: +1¦(+2h)
Sensor:ntc, 2pcs (room temperature & defrosting control)
Power supply: 230vac or 120vac 50/ 60 hz
Compressor:16a/1hp
Defrosting:10a/250vac
Evap.Fan:8a/250vac
Dimension: 77(l)-35(w)-60(d)mm
Mounting hole dimension:71(l)-29(w)mm
Digital temperature controller
For fan cooling freezers& cold rooms of low temperature
Waterproof panels
Double displays (with an outer small display shows temperature synchronously)
Manuallyf=automatically defrost by electric heater
Evaporator fan control
Time/temp.setting to end defrosting
Parameter locking
Renew factory defaults by button operation
Range:·í45f+45f¦(·í40f+120+H)
Accuracy: f+1f¦(2+H)
Sensor: NTC, 2pcs (room temperature &defrosting control)
Power supply: 230VAC or 120VAC 50 / 60Hz
Compressor:20A/ 250VAC (1HP)
Heater:10A/250VAC
Evap.fan:5A / 250VAC
Host controller dimension: 77(L)f-35(W)f-60(D)mm
Mounting hole dimension of host panel:71(L)f-29(W)mm
Accessional display dimension: 83(L)f-23(W)f-18(D)mm
Mounting hole dimension of accessional display:66(L)f-19.5(W)mm
Model no.: sf-103
Digital temperature controller
For fan cooling cake display showcases of medium& high temperatures
Waterproof panel
Temperature control / light control
Automatically=manually defrost by turning off the unit
Manually defogging control
Re-start delay
Renew factory defaults by button operation
Rangeí4545¦
Accuracy: +1¦
Sensor: ntc, 2pcs(room temperature & defrosting control)
Power supply: 230vac or 120vac 50/60hz
Compressor:20a/ 250vac (1hp)
Defogging heater:10a/250vac
Light: 5a/250vac
Dimension: 77(l)-35(w)-60(d)mm
Mounting hole dimension:71(l)-29(w)
MZ series isolation terminals ars applicable to non-explosion proof during the industrial automation and process control, they are used to connect between on-site meters and control rooms, in an attempt to collection, detection, isolation, transmission, distribution and convertion. The applicaion of isolators aim to improve the anti-interference capabilities of automatic control systems of industrial manufacture process, to protect device and enhance the stability and reliability of the systems.
MZ series adopt new modular design, which features super-thin shell, small volume, low power comsumption, high conversion accuracy and anti-interference. They can be combined with other units and DCS, PLC systems etc. In the fields of oil, chemical,power, steel, machinery, metallurgy and light industry.
6.2mm super-thin structure,unified shell dimension.
Modular design,small volume,low power comsumption and high conversion accuracy.
Isolation among input, output and power.
Standard DIN rail mounting.
Stable time: 3~5m.
CE certified.
800_080
BT P B80 385 RM
Main Features:
* Small volume, high discharge capacity
* Reliable protection thanks to double control disconnector
* Quick response
* Low voltage protection level and with double terminals connection
* Green window will change when fault occur, also in the same time provide remote alarm terminal
* Core components are from international well known supplier
Application:
This product is designed to protect low voltage devices from surge damage, used in power supply system such as power distribution-room, distribution-cabinet and other important power supply system. Widely used to protect mobile communication station, telecommunication centre, civil aviation, finance, and so on.
Specifications:
Technical data
Rated voltage
(max. continuous voltage) Uc 385V
Nominal discharge
current(8/20) In 35kA
Max. discharge current Imax 80kA
Voltage protection level
at 20kA Up í_1.8kV
Response time tA í_25ns
Operating
temperature range -40íµí¡+80íµ
Cross-sectional area 1.5mm2~25mm2(solid)/35mm2(flexible)
Mounting on 35mm DIN rail
Test standards GB 18802.1-2002; IEC 61643-1:1998-02
Thermostat
Features
Attractive modern styling makes this thermostat ideal for locating in the occupied space
Digital lcd display of room ambient temperature and user selected temperature setting on demand
Adjustable heating/cooling/ventilating mode control
Adjustable manual 3-speed or automatic fan speed control and on/off control output for valve
Model available for cycling fan control
Infrared remote control available(optional)
Backlight function available(optional)
Thermostat mounted directly onto a wall or standard junction box
Model available for 120, 230 vac power input also
Reliable dc power supply by transformer
Reliable output by relays
Specifications
Sensor: ntc
Set-point range: 5～35℃
Accuracy: 1℃
Max load:
Fan coil: 150w
Heating equipment: 2.5kw Power consumption: 2w
Power supply: 220v(or any other volt.) 15％, 50/60hz
Dimension: 86f-86f-13mm (wf-hf-d)
Hole pitch: 60 mm
Shell: fire retardant pc abs
Display: lcd (65f-48mm)
Application
Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.
Features
1: Our own patent technology
2: Embedded system control
3: Touch screen operation, easy to operate
4: TFT LCD display, UI flattening design
5: Dual heat jaws, temperature controlled independently
6: Micro-printer prints mini-report
7: Pressure easy to adjust, heat temperature and time touch screen input.
8: Emergency stop button, safety design to prevent burns
9: Over temperature protection, over pressure protection
10: Silence working
11: DB9 RS232 communication port.
12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data.
Technical Indexes
Heat temperature: Room temperature+6 ~ 300â??
Accuracy: ±0.2 â??
Dell time: 0.1~ 999.9s
Pressure: 0.05 MPa~1.1MPa
Heat jaw surface: 265mm Ã? 12 mm (customized)
Heat jaws: 2, controlled independently
Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide)
Gas source interface: Ф6mm
Outer dimension: 536 mm (L)Ã?335 mm (W)Ã?413 mm (H)
Work noise: 0db
Power supply: AC 220V 50Hz
Net weight: 33kg
Standards
QB/T 2358(ZBY 28004)ã?�ASTM F2029ã?�YBB 00122003
Configuration
Delivery: main unit, micro-printer, footswitch, sample feeding rod.
Optional: Communication cable, DSM system
