Railway Rail Mrs87A

UIC 60, SBBVI Heavy steel railway rail 60 E1 vignolschienen NEW Steel rail 60E1 European standard EN13674-1:2003(E) Quantity x size: 1959x25m 34x18m 7x12m. Total amount: 2990mt, 49700m Other Details, schemes and presentation - on request.

Railway rail turnout railway switch,Rail Accessories Manufacturer PRODUCT PARAMETERS Turnout, also called railway switch, is a connection equipment from one railway to another railway. Usually there are a large number of rail lines at the marshalling station. With turnout, even single-track railway, two trains could run from opposite directions through construction of an out-section line which is longer than train, railway line can fully function to its limitation. A single turnout usually consists of a frog, a switch, two switch points, two guard rails, straight and curved closure rails, stock rails and switch stand. Type: Single turnout, symmetrical turnout, three-way turnout, crossing crosses turnoutetc.

P50 Rail 50kg/m Heavy Steel Rail China Supplier Standard: Chinese standard GB2585-2007 Rail Heigth: 152mm Bottom Width: 132mm Web Thickness: 15.5mm Head Width: 70mm Length: 12m~25m Model Number: 50kg/m Application: Railway Rail, Mine tunnel use, Factory Weight: 51.51kg/m Product name: 50kg/m heavy steel rail Certificate: ISO9001:2008 Material: 50Mn, U71Mn P38/P43/P50/P60/P75 Rail Heavy Rail Steel Rail Supplier Signum Rail can supply a large variety of steel rails, including heavy steel rail, such as 50kg heavy steel rail, light rail, crane rail with different standards and specifications. GB Standard 50kg heavy steel rail can be used for the transportation of larger mine roadways and factory workshops, crane hoisting equipment, and the laying of special railway lines.

Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair Detailed Photos Rail Clamps for Railway Maintenance Rail Clamps for Railway Maintenance Rail Clamps for Railway Maintenance Product Parameters Model LJ-JJQT Type Rail Clamp Material Stainless Steel Weight 6.5kg

Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)

Rail tie plates, also called rail iron tie plates, railway casting tie plates, railway base plates, which are fixed between the rail and sleeper, which is one of the important components in the track structure and plays an important role in damping the wheel-rail power system. With the development of heavy-duty railway transportation, the axle load is increased day by day. While the rails are gradually heavier, higher requirements are put forward on the performance of the railway track tie plate, and the tie plate should have good vibration damping performance, impact resistance and long service life. Anyang Railway Equipment Co., Ltd can provide the rail tie plates applied in conventional railway, high speed railway, urban railway as per customers requirements, each type of rail tie plate has its unique features on the process of utility.

Rail Rubber Pads, also called guard rail plates, which are set between the frog guard rail and the turnout sleeper to provide a firm connection condition for the guard rail and the running rail (basic rail) to ensure the width of the guard rail rim groove and driving safety. The guard rail pad is one of the important parts of the track, and its function is to ensure that the vehicle smoothly passes through the special area such as the switch part or the bridge without derailment accidents.

Railway rail shoulder, also called rail iron shoulder, rail fastening inserts, railroad shoulder insert, railway track rail shoulder, it is semi-embedded in the concrete rail ties to fix the elastic rail clips to the tie plates. Anyang Railway Equipment Co., Ltd mainly provide different types Casting Rail Shoulders to meet customer's requirements.

Type: Shoulders, We Supply Different Designs Material: Cast Iron, QT400-15,QT450-10,QT500-7, etc Dimensions (L x W x H) (mm): Acc. Dwg Place of Origin: Jiangsu, China (Mainland) Brand Name: ALEX Model Number: KSRS Item Category: Sand Casting Rail Shoulder Free Sample Finish: Plain (oiled) Service: Manufacturing, Designing, OEM Manufacturer: Kunshan Alex Quality Control: Inspection on each workshift/new batch material/machine adjustment Processing: Casting Guarantee: Acc. Contract Usage: Inserted in the Concrete Sleeper Packaging Detail: Woven Bag in Pallets Delivery Detail: Shipped in 25 days after payment