Lift Fault

the mobile hydraulic  scissor lift  is widely used for the equipments installations and maintenance at the following places like construction sites workshops,warehouse,granary,bus/railway stations,hotels,airports,gas station and aerial pipeline. Major Features: 1-)High working capacity, easily pushed around,most spacious platforms for several people to work on  2-)High strength steel structures,smoothly lift up and drop down, easily operated,few faults. 3-)Moving method:4 wheel and 2wheel types are optional, it can be pneumatic rubber tyres,solid rubber tyres or polyurethane tyres. 4-)Power sources: local power available at the working sites(110V,220V,380V,415V),diesel engines and generators 5-)Working heights:  4m,6m,8m,10m,12m,14m,16m,18m,20m  Safety : 1.) In special circumstance, the scissor lift will use explosion-proof electric equipment 2.)The platform equipped with antiskid plate to prevent slipping, it is enough safe when works on the platform. 3.)The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity. 4. )The scissor lift equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position. 5)The platform equipped with antiskid plate to prevent slipping, it is enough safe when it works ower supply: Local power is available at the working sites(110V,220V,380V) , they also can be equipped with manual control or diesel power to meet the need where the electricity is not available.

CFMG self propelled scissor lifts are electric drive. With the main components from world class brands and have distinct merits of strong capacity, convenient operation,safety, reliability and good quality. our electric powdered scissor lifts are energy saving, environmentally friendly with less noise and no emission. Distinct features are 1. compact structure 2. Drivable at full height 3. fault diagnosis system 4. it has swing out tray 5. flexible and maneuverable 6. pothole protection system 7. 24v Dc power source with long working cycles.

Features of electric hoist double girder overhead crane 1.Double girder structure makes the crane bridge have sufficient strength, rigidity, and stability. 2.Rail-in-middle box girder design thoroughly meets the requirement to strength, rigidity and stability. 3.End beams designed with simple structure can be easily installed with main beam by high-strength bolts. 4.CD or MD high quality wire rope electric hoist is used as lifting mechanism. 5.Soft starting motors with light current are used with ground control. 6.Dual-motor independent drive device is adopted to reduce the wear of rail gnawing and reduce the possibility of wheel climb off track fault, etc. 7.Motor is directly controlled by contactor, which can make the motor achieve single and double speed and reversing control. 8.Frequency converter is used to change the frequency and voltage of motor power to realize the function of speed adjustment control of motor. 9.Multiple safety protection system is adopted, including short circuit protection, no-voltage protection, emergency power off switch protection, overload limit protection, travel limit protection, zero and chain protection, ground protection, etc.

Product Principle for trackless mould transfer cart The battery of the trackless mould transfer cart is placed inside the cart, which provides electric power to the motor through the electrical control module, thus providing power for the reducer to drive the wheel drive system, and operating and stopping the cart through an operating handle or wireless remote control. Product introduction for trackless mould transfer cart The trackless mould transfer cart has no fixed route and is flexible in action. The crane is used to lift the mould onto the trackless mould transfer cart. In order to prevent the mould from moving on the trackless mould transfer cart by inertia, the rubber board is laid on the deck and the mould is placed from each place. It is transported to the corresponding station and has its own safety detection device. It automatically stops when a pedestrian or an obstacle is encountered. It is safe and reliable. Features for trackless mould transfer cart The trackless mould transfer cart using rubber wheel,the larger the tonnage, the higher the flatness requirement of the ground, which is generally concrete or toughened ground. Due to the limited battery life, it is suitable for occasions with indoor irregular transport and low frequency of use. Advantages for trackless mould transfer cart 1, maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance; 2, unlimited remote control, simple operation, safe and stable; 3, standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault; 5, emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety; 6, polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip;

Brief Introduction for warehouse automated transfer cart This kind of warehouse automated transfer cart is consisted of power source, gear train, steel structure bearing frame, steering gear, running gear, control system and fault diagnosis module. other functions. It can turn around on the cement floor. All the warehouse automated transfer cart are equipped with warning alarm and security detection apparatus, and the alarm would ring and the cart would stop immediately if there was any obstacle or pedestrian in the running path of the warehouse automated transfer cart. Also, we will provide intelligent automatic rapid charger with the warehouse automated transfer cart. Features of warehouse automated transfer cart Positioning fixture; Lift platform and other assistive device are optional to meet different demands on various occasions; The PLC is also alternative if it's necessary. How to choose the suitable transfer cart? All of our transfer carts all customized as client's requirement, for choose the most suitable transfer cart,please kindly providing the following information: Transfer or handling what material/cargo? This transfer cart is running on rails or ground(floor)? Your requirement for table size:length,width and height? How about the running distance? How many working hours in per day?

Product Details Usage: Industrial, Workshop, Warehouse, Port Wheel Type: Polyurethane Wheels Color: Customized Running Speed: 0-40 m/min (Adjustable) Load Capacity: 1-500 Ton (Can Be Customized As Per Demands) Wheel Amount: 4/6/8 Application: Materials Transfer Working Principle The trackless material transfer cart is battery powered. The battery is installed in the trackless material transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the trackless material transfer cart to start, stop, go forward, backward, adjust the speed and so on. Features 1. Maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance. 2. Unlimited remote control, simple operation, safe and stable. 3. Standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault. 5. Emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety. 6. Polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip. 7. Optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys;