A 10 micron ultra-long microporous metal titanium plate is a material made from sintered titanium powder, possessing high gas diffusion and electrical conductivity. The manufacturing process involves blending titanium powder, shaping it, and then subjecting it to high-temperature sintering to form a sturdy titanium plate with a specific porous structure.
Parameters
Filtration precision: 10um
(0.5 um, 1 um, 3 um, 5 um, 10 um, 20 um, 30 um, 50 um)
Porosity: 30%â??40%
Pressure: � 0.2Mpa/cm2
Temperature resistance: 300 â??(wet)
Maximum Operating pressure: 0.2Mpa/cm2
Size: 200*1000*1.5mm
Features
1.High gas diffusion performance: The porous sintered titanium plate features a uniform pore structure, enabling efficient gas diffusion. This characteristic makes it suitable as a gas diffusion layer in polymer electrolyte membrane fuel cells (PEMFC), facilitating the effective transport of fuel and oxygen.
2.Excellent high-temperature resistance: Due to titanium's high melting point and excellent corrosion resistance, the porous sintered titanium plate exhibits remarkable stability and durability in high-temperature and corrosive environments. This property makes it an ideal material for filters, capable of effectively removing impurities in harsh conditions.
3.Coating capability: The porous sintered titanium plate can be coated with precious metals such as platinum (Pt) through electrochemical methods, enhancing its catalytic performance at the anode. This feature presents potential for its application as an anode material in fuel cells, improving fuel cell performance and efficiency.
Applications
Polymer electrolyte membrane fuel cells (PEMFC)
Filters for high-temperature and corrosive environments
Anode material in fuel cells
Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
Supplier: Icumsa 45 sugar, nano titanium, all types of thermal coal, metallurgical coal and pet coke, all types of used industrial mfg. equipment.
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
Product : Titanium Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 21 reviews price : Start from 20 USD RFP India is Indias wellknown manufacturer supplier and exporter of Titanium which is a metallic element and is being recognized for its high strengthtoweight ratio It is a strong metal with low density that is quite ductile lustrous and metallicwhite in colour The relatively high melting point probably over 1650 C or 3000 F makes it useful as a refractory metal Titanium is used in steel as an alloying element ferrotitanium to reduce grain size and as a deoxidizer and in stainless steel to reduce carbon content Applications for titanium mill products sheet plate bar wire forgings castings can be found in industrial aerospace recreational and emerging markets Powdered titanium is used in pyrotechnics as a source of brightburning particles Titanium pipes tubes
Supplier: Stainless steel pipe, stainless steel plate, stainless steel round bar ,stainless steel seamless pipe, titanium pipe, titanium plate, monel plate ,monel pipe, titanium wire , monel wire , monel seamless pipe ,stainless steel elbow, stainless steel circle
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.