Dimensions & weight
OA length-transport 4.75M Drill up to 150m with 4" and up to 8" for waterwell
Drill over 100M per day
Vertical, Angle Drilling available
OA width 1.5 m
OA height-transport 2.25 m
OA height-mast up 5.2 m
Weight-less drill pipe 4.6ton
ENGINE
Model Hyundai D4AF-G
4 cylinder diesel engine
Rated power 85HP/1800rpm
Fuel capacity 80
Cooling system water cooling
TOP HEAD ROTATION
Single reduction oil bath gearbox with two heavy single speed, disc valve motor.
The gearhead is mounged outside the mast rails to ease drill pipe and casing handling.
Reduction Spur gear - 3.3 to 1
Performance two motor(Std)
Max . RPM 0~1200~60
Max . Torque 180 ,360
FEED SYSTEM
Top head driven by hydraulic cylinders throught heavy duty chain.
Traverse cylinder 90mm*55 mm*3100mm
Head travel 1st 6.2M
Pull-up capacity 12ton
Pull-down capacity 6ton
UPPER FRAME MOVE
Upper frame can be moved back and forth and casing treatment and the centering calibration are easy.
Travel 400
CRAWLER BASE
Crawler type LG #4500
Crawler speed 2.5/h
Ground pressure 0.4
3-web track shose 450
Ground clearance 300
SELF LOADING
Ground clearance 1300
Width 3000
HYDRAULIC OUTRIGGERS
Four hydraulic outriggers are fitted to the outer corners of the rig for easy and accurate levelling of the rig.
DRILL PIPE BREAKOUT
Cylinder operated pipe wrench,
Torque break-out 4ton
HYD. DRIFTER
Model JDMD700
Impact power 15~40 -M
Blow frequncy 300/~2400/min
Flow rate(max) 40~90 /min
Working pressure 150bar
Weight 700
WINCH
Planetary with spring applied hydraulic release break,with cable.
Spool capacity 17M of 10 cable
Line pull 3 Ton
HYDRAULIC SYSTEM
General 3 pump open loop system
Tank capacity 120
Filtration 10 micron
Pump model K3V63*2+32(HP constant)
Cooling system Air cooling
Operating pressure 280bar
LIFTING & ELECTRICAL SYSTEM 24V
Mast 2-60 watt floodlights
Control panel 2-gauge floodlights
Work 2-60 watt floodlights
CONTROL PANEL
All controls gauges are grouped at the operator\\\'s station within sight of the borehole.
DRILL PIPE & CASING
Drill pipe Max. length 4.5M
Casing max. diameter 8"
WORKING TABLE
Max. casing diameter 8"
HYDRAULIC HOLDER
Single Clamp 73¦~230
1. MUD PUMP
Hydraulic cylinder operated duplex piston pump.
Model JDMP200
(80ó¦*120)
Capacity 200l/min
Max. press 50bar
Valve Steel ball type
2. MUD PUMP
Hydraulic cylinder operated duplex piston pump.
Model JDMP800
(150ó¦* 250)
Capacity 800 /min
Max. press 30bar
Valve Steel ball type
3. HYD. DRIFTER
Model JDMD800
Impact power 25~50kg-M
Blow frequncy 2000/min
Flow rate(max) 120l/min
Working pressure 150bar
Weight 700 kg
4. WELDER
Hyd. Motor drive 250Amp,DC
New Arrival: Check out our latest collection of high-performance loaders and bulldozers. Special Offers: Don,t miss out on our limited-time deals on backhoes and heavy machinery. Top Quality: We guarantee the finest quality construction equipment for all your project needs. Fast Delivery: Get your machinery delivered quickly and efficiently to your site. Expert Support: Our team of professionals is here to assist you with any queries or concerns. Diverse Selection: Choose from a wide range of machinery options to meet your specific requirements. Trusted Brand: Join countless satisfied customers who rely on our durable and reliable products. Contact Us: Reach out today to place an order or learn more about our machinery Type: Front Loader, Lorry Loader, Wheel Loader Industry-specific attributes Year 2016 Available 2014, 2013, 2018, 2017, 2020, 2021 Other attributes Applicable Industries Rated Load: 5 tons Machine Weight: 1700 - 2100 kg Hydraulic Pump Brand: HYDAC, Eaton, TOSHIBA, CAT Engine Brand: CATERPILLAR Power: 55 kW, 92 kW Machinery Test Report: Available Inspection Video: Available Key Components: Pressure vessel, Motor, Pump, Gearbox, Engine, PLC Operating Hours: 2001-4000 Origin: Japan
Applicable Industries Construction works , Advertising Company Showroom Location United Kingdom, Spain, Nigeria, Peru, Canada, Thailand, Colombia, Chile, South Africa, USA, Italy, Kenya, Germany, Saudi Arabia, France, Mexico, Turkey, United States, Romania, Russia, Malaysia, Australia, Brazil Type Backhoe Loader, Front Loader, Mini Loader, Skid Steer Loader, Lorry Loader, Tractor Loader, Skid Loaders Rated Load 200 Ton Machine Weight 300 - 400 kg Hydraulic Pump Brand MOOG, Vickers, YUKEN, Liyuan, Kawasaki, Nabtesco, Changjiang, ENERPAC, SAUER-DANFOSS, Atos, HAWE, Bosch Rexroth, Huade, Hengli, TOSHIBA Engine Brand Cummins Power 75 KW, 60 KW, 44.7 KW, 37 KW, 55 kw, 70 KW, 92 KW Machinery Test Report Provided Video outgoing-inspection Provided Core Components Pressure vessel, Motor, Bearing, Pump, Gearbox, Engine, PLC Working hours 2001-4000 Place of Origin Germany Product name Backhoe Wheel Loader Keyword Front Loader Tractor Model Road Tyre Brand China TOP Brand Name Wheel Loader Made Color Yellow
Bitumen Sprayes In All Ranges : Model No. Capacity ( Ton Per Hour ) TMB - 3000 3000 ltrs TMB - 4000 4000 ltrs TMB - 6000 6000 ltrs Asphalt Bitumen Sprayer Silent Features : Fully - Insulated tank with high efficiency heating system. Air cooled diesel engine and positive displacement gear pump. Designed to suit standard truck chassis. Safe and Easy in operation. Hand spray system. Unique pressure cleaning. Totally factory tested , arrives ready to launch. Asphalt Bitumen Sprayer: Bitumen Pump : 350 Lpm , Positive Displacement gear pump. Air compressor : Twin cylindered , 3 HP , 360 Lpm capacity with working pressure of 9 Kg/cm2. Driving unit : Powered by a 25 HP Air cooled , kirloskar make diesel engine Model HA – 294. Bitumen spraying pressure : 0 6 Kg/cm2 Pressurized bitumen spraying. Temperature Indicators : 0 3000 C (analog) scale located on the tank. Digital temperature indicator on remote box. Spray bar : Standard width : 2.4 M Adjustable extension bar for spraying width upto 4.2 M. Nozzle distance: 225 mm Nozzle c/c. Pneumatically operated nozzles for Spray bar controlling. Technical Specification : Description TMB - 3000 TMB - 4000 TMB - 6000.
This is Semi Automatic Machine with stacker System. The production capacity is very high It is adopting with multi-valves in series, electricity discharging unit and compressing and vibrating organic combing unit to materialize the highest moulding and density of the finished products. Auto pallets conveying, pallets feeding and compulsive materials arranging have highly raised up the production efficiency and reduced the working intensity, while simple pallet conveying and feeding units can be installed for production. Main Technical Performance and Parameters: Cycle Time (s) 20-25 Pallet Size (mm) 700 x 540 x 25 Power (Hp) 23 Machine Specification (mm) 4000 x 3600 x 2550
Technical details Mrm tw 2250/1500 Mrm tw 3000/2000 Mrm tw 4500/3000 Mrm tw 6000/4000 Mixer capacity 2250/1500 lt 3000/2000 lt 4500/3000 lt 6000/4000 lt Production capacity 1, 5 m³ 2 m³ 3 m³ 4 m³ Engine power 2 * 30 kw 2 * 37 kw 2 * 55 kw 2 * 75 kw Liner plates Hardox 450 ni-hard Hardox 450 ni-hard Hardox 450 ni-hard Hardox 450 ni-hard Side liner plates Ni-hard ggg60 Ni-hard ggg60 Ni-hard ggg60 ni-hard ggg60 Water distributor Included Included Included Included Security switch Included Included Included Included Hydraulic discharge door Included Included Included Included Automatic lubrication system Included Included Included Included Emergency stop Included Included Included Included
Advantages 1Its very rigid body frame is welded by shaped steel tube, no deform. 2It can perform horizontal, vertical directions and cubic 3 directions cut. 3Built-in converter is used for wide scope speed so is motion stable and a fit slow feed back. 410KVA malt lead special transformer is multi-lead for poly step voltage adjust, so is high production efficiency and long use life. Specification and parameter Type Unit XMC-2000 XMC-3000 XMC -4000 XMC-6000 XMC-8000 Items Cutting block size MM 2000-1300 -680 3000-1300 -680 4000-1300 -1300 6000-1300 -1300 8000-1300 -1300 Over all dimension MM 4500-1640 -2700 5800x1950 x1850 6800x1950 x2450 8800x1950 x2450 10800x1950 x2450 Weight Kg 800 1000 1200 1600 2000 Power Kw 11.2KW 11.2KW 11.2KW 11.2KW 11.2KW Seworthy
Specification Sud- 650/1000 Drilling capacity S45c 50mm Fc20 55mm Boring capacity S45c 100mm Fc20 120mm Tapping capacity S45c Fc20 Spindle taper Mt#5 Spindle travel 200mm Induction motor Multi-speed motor 9 steps: 64, 90, 130, 215, 300, 445, 600, 850, 1250 Spindle motor Ac servo motor 3.7kw Torque 1.09kg.M Positioning accuracy 0.01 /200 Repeatability í= 0.02mm Least increment 0.01mm Rapid traverse 8000 mm/min Cutting feed rate 40~4000 mm/min Table size 1000 x 1000mm Table working area 1000 x 650mm Spindle nose to table Max.: 700mm min.:300mm Table to ground 720mm Machine high Max.: 2260 min.: 1860 Machine weight 1500 Power Ac 220v 60hz í= 10%
SCM series S super thin mill is also called Micronizer , Industrial Mill, Micron Grinding Mill ,Micron Grinding Mill £¬Ultrafine Mill, Micro Powder Mill which is a kind of Mill, Grinder, Grinding Mill, Milling Machine. On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, SCM Series S Micro-power Grinding Mill .the latest industrial micro-power grinding mill, is a new type grinding machine for producing micro-power. SCM series S super thin mill can grind calcite,limestone,calcite,dolomite,kaolin,bentonite,talc,illite,pyrophillite,barite,meerschaum,fluorite,potash ore and other more than 200 kinds of material that Moh's hardness is blow 9,non-explosive,non-flammable minerals. Model : SCM6015 , SCM8021 , SCM10027 Roller number: 15, 21, 27 Diameter (mm) : ¦µ600, ¦µ800 , ¦µ1000 Ring number:1¡Á3,1¡Á3,1¡Á3 Main unit speed(mm):235,235,173 Max. feeding size(mm):10, 10, 20 Final size (mesh): 325-2500, 325-2500, 325-2500 Capacity (kg/h): 325-2500, 600-4000, 900-6800 Overall dimension (m): 10¡Á2.3¡Á5.5, 13¡Á3¡Á5.8, 18¡Á4¡Á8.6.
Decription Magnetic separator is used in recycling powder particle removal of iron powder . The advantage of dry magnetic separator : Mineral processing without water: due to the dry magnetic separator without water, one production line can save 4000 tons water each day and 2.4 million tons of water can be saved every year, at the same time without sewage production. Perfect separation effect: machine adopted by dynamic design, no residue in the drum no matter magnetic material slide, displacement or tumbling on the surface of the drum. Thus excellent on material sorting, and selection grade can be increased 3 to 6 times, and featured grade can get over 65%. Powerful processing capability: due to our company adopt open magnetic system, no material reunite and blocking occurring, it can get powerful processing capability.Each magnetic rougher can process 2000-4000 tons of ore every day, and multiple machines can be used parallel, which can be doubled to increase production. Widely industry adapted: our products through the application of digital technology and inverter technology, increased the variety of dry separation and the range of applications. It can be divided into four main categories, more than 20 varieties and specifications which can satisfied different industries¡¯ demand on a variety of iron ore, sand, slag, tailings, steel ash, sulfuric acid residue, abrasive, refractory materials, plates, rubber and food. Part of the equipment can be used multiple. High production results:dry separation without water, thus no water source limitation and year-round continuous production, especially suitable for waterless regions where seasonal water shortage, cold areas, it can increase 100-150 working days every year, effectively improve equipment utilization and production yields. Weight 1.2t drum size 800*1800