Pendulum Impact Testing Machine

Glass Bottle Pendulum Impact Test Machine is applicable in testing the impact resistance of various glass bottled products, for instance, beer bottles, wine bottles, beverage bottles, etc. It is a referential instrument for breweries, glass bottle plants, pharmaceutical manufacturers. Features Automatic electronic measurement mode. Touch interface can concurrently display impact energy and angle values. The instrument is equipped with micro-printer. Users can freely shift modes of passing test and destructive test. Functions of ISP remote online control and upgrade are advanced. The loading clamp can be moved freely in vertical and horizontal directions, which is convenient for users to adjust the position of the bottle during the process. The design and manufacturing of the instrument strictly comply with the international standard requirements for parameters of materials and accessories to provide reliable guarantees for users to accurately test and experiment. Positioning accuracy, rotating and moving freely of the pendulum are attained. Protective cover of stainless steel safety shield is full of hommization. Principle According to the law of conservation of energy, the energy of the pendulum impacting the sample bottle each time is determined by the potential energy when the pendulum is suspended and positioned before impact. When the angle at which the pendulum is suspended is a certain value, the potential energy of the pendulum is also a certain value, and the impact energy of the pendulum on the glass bottle is also a certain value. According to the fixed relationship between the hanging angle of the pendulum and the impact energy of the pendulum, the pendulum is released after a certain amount of energy is present, so that the striking point impacts the sample bottle placed on the sample loading fixture, and then observe the sample bottle is broken or not, and judge the impact resistance of the sample bottle accordingly. Standard GB/T 6552-86. Specifications Impact Capacity 0 ~ 2.5 N�·m Diameter of Specimen �¤20-165 mm� (Clamp can be customized) Height of Specimen 20 ~ 180 mm Resolution 0.01 Nm Dimension 530mm (L) 350mm B) 700mm (H) Net Weight 20 kg Configurations Standard: Instrument, Protective Cover, Level-Meter. Optional Non-standard Loading Clamp.

Reference Standard: BS EN 12600:2002 Glass in building Pendulum test Impact test method and classification for flat glass Technical Data: 1) Pneumatic Tyres Impactor: Weight: 50 kg ± 0.1 kg Tyre pressure: 0.35Mpa ± 0.02Mpa Tyre type: 3.50-R8 4PR Sample size: 876 mm ± 2 mm * 1938 mm ± 2 mm Inside the sample frame: 847 mm ± 5 mm * 1910 mm ± 5 mm Impact frame footprint: 1300 mm*3900 mm*3700 mm Lifting mode: manual, automatic optional Impact body release mode: manual, automatic optional 2) Impact Testing Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Manual type: Manual lifting , manual release, mechanical clamping Main frame: internal width(847±5)mm internal height(1910±5)mm Clamping frame: internal width(847±5)mm internal height(1910±5)mm Rubber strip: (20±2)mm wide, (10±1)mm thick, hardness: (60±5) IRHD Note: we will provide (20±2)mm wide, (10±1)mm thick, hardness: (60±5) Shore A Dimension of test pieces: width(876±2)mm, height(1938±2)mm Drop height: 190mm, 450mm, 1200mm

Supplier: Tension and compression testing machine, hardness testing machine, melt flow indexer, pendulum impact testing machine, torsion testing machine, civil engineering testing machine

Supplier: Hydraulic power pack and,pipe cold cutting machine, heavy duty impact sockets, manual torque wrenches, digital manual torque wrenches, Hydraulic torque wrenches, hydraulic power pack with accessories, Electric torque wrenches(wire), electric torque wrenches(cordless) Non sparking tools, crowfoot & slugging wrenches, hydraulic bolt tensioners, manual torque multipliers (plate type std), manual torque multipliers (slim & light weight), pipe cold cutting machine, flange spreader, nut splitter
Services: Manufacturers and exporters

Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1) Weight:45kg±0.1kg 46kg±0.1kg 2) Height: 330mm ± 13mm 3) Max diameter: 250mm 4) Lead sand size: 2.5mm Pneumatic Tyres Impactor Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600 Reference standard: BS EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass MS 1498:2017 Safety glass in building - Specification Technical Parameters: Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Impact Frame Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Drop Ball Impact Test Machine Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object Hardness steel ball: a) 2260g ± 20g, diameter of approximately 82.5mm b) 227g ± 2g, diameter of approximately 38 mm c) 1040g ± 10g, diameter of approximately 63.5 mm d) 508g±3g, diameter of approximately 50 mm Frame Height: 1000mm, 5000mm, 12000mm, Customized Automatic release and lift. Power: 220V 50Hz 580W Supporting fixture: a) Support Size: 350mm*350mm and 660mm*660mm (Customized) b) Frame width 15mm c) Steel box height 150mm d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50 e) Interposed sheet of rubber: thickness 3mm, hardness shore A50 Applied Test Pieces Size: 300mm*300mm 610mm* 610mm Head-form Test Device Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm

It is used to measure the rebound value of vulcanized rubber and elastomer. ( Hardness requirement: 30-85IRHD)

227 g Ball Test 2260 g ball test Test Method for Ball Drop Impact Glazing Materials Ball Test Device Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object Suitable for impact test of safety glass and tempered glass. Related Standard: 1) ISO 3537 Road vehicles Safety glazing materials Mechanical tests Clause 6: 227 g ball test, Clause 7: 2260 g ball test 2) GB 15763.3 Safety glazing materials in building Part 3: Laminated glass--Appendix B Drop ball impact specimen support Principle: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object 1) Top pulley group 2) Column 3) Square tube 4) Lower limit switch 5) Encoder bracket 6) Motor 7) Wire take-up 8) Base 9) Release device 10) Electromagnet 11) Expansion bolt 12) Leveling screw Steel Ball 2260g / 82mm 1040g / 63mm 535g / 51mm 508g / 50mm 227g / 38mm Drop Height: 1000mm, 5000mm, 12000mm, Customized Automatic release and lift. Power: 220V 50Hz 580W Supporting fixture: a) Support Size: 350mm*350mm and 660mm*660mm (Customized) b) Frame width 15mm c) Steel box height 150mm d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50 e) Interposed sheet of rubber: thickness 3mm, hardness shore A50 Applied Test Pieces Size: 300mm*300mm 610mm* 610mm 227 g Ball Test, 2260 g Ball Test, Test Method for Ball Drop Impact, Ball Test, Support Fixture, Support Frame, Safety Glazing Materials Test, Mechanical Test, Drop Ball Impact, Ball Drop, Glass test, Impact Test, Glass Impact Support Fixture and frame for 227 g ball test and 2260 g ball test of Safety glazing materials. Laminated glass Drop ball impact specimen support. Related standard ISO 3537. Professional impacting testing equipment of Mechanical tests for Building glazing and Road vehicles glazing This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.

Usage : Measuring the impact resistance intensity of the non-metal materials (including plastic pipes) Conform to the standards Iso179, jb/t8762-1998, iso9854 Main technical parameter Modeldigital display Typexjjd-50 Impact energy7.5j, 15j, 25j, 50j Velocity at impact3.8 m/s Strike center distance395mm

Impact test bench is a kind of impact and impact test equipment with novel design, high degree of automation, simple operation and easy maintenance. It can perform the conventional impact test of half sine wave, back peak sawtooth wave, square wave and other waveforms.