Bulldozer Simulation Training Model

1, let students familiar with the industrial commonly used sidewalk escalators working principle, structure composition, low-voltage electrical structure and principles. 2, through the analysis of electrical schematics, students with the help of schematic analysis, master the safety protection and working form of elevators, and through analysis and measurement, to find out the location of fault points, a deep understanding of the operation of elevators. 3, improve the actual hands-on analysis ability of students, and actually improve the level of skill operation. 4, through the analysis and elimination of elevator faults, to complete the common elevator fault cognition and understanding. 5, through the PLC host programming, understand the PLC program programming principles and methods. 6, escalator safety operation and use of practical training 7, rung disassembly operation and practical training 8, comb plate adjustment and practical training 9, armrest belt tension adjustment and practical training 10, rung chain tension adjustment and practical training 11, brake adjustment and practical training 12, maintenance before the safety knowledge operation and practical training Daily maintenance 13, escalator emergency rescue 14, escalator safety circuit fault finding and troubleshooting practical training 15, escalator access circuit fault finding and troubleshooting training 16, escalator safety monitoring circuit fault finding and troubleshooting training 17, escalator power circuit fault finding and troubleshooting practical training 18, escalator control circuit fault finding and troubleshooting training

1, to understand the structure of escalators, tightening device, rungs, ladder rails, armrest straps, traction chain, comb plate, drive device and other major components name and role. 2, to understand the role of escalator installation protection device, installation position includes: traction chain break protection device, armrest belt entrance safety protection device, ladder subsidence protection device, drive chain break protection device, armrest belt break protection device, brake, mechanical locking device. 3, the basic safety operation and use of escalators; 4, rung disassembly operation; 5, comb plate adjustment; 6, comb cutting-edge plate adjustment; 7, armrest tight adjustment; 8, the adjustment of rung chain tension; 9, the adjustment of the drive chain; 10, escalator anti-reversal mechanical experiments; 11, upper and lower traction chain safety experiments 12, host chain-breaking safety experiments

Details Type: Breathing Apparatus, Breathing Apparatus Model Number: S1100 Place of Origin: Jiangsu, China Instrument classification: Class II Warranty: 2 years, 2 years After-sale Service: Onsite Training Product name: S1100 ICU Ventilator Color: Gray and white Material: Environmental material Name: S1100B Certificate: ISO, CE,FSC Application: ICU, NICU Size: 670*700*1160mm Function: Emergency Care

i.About The Product The device is designed based on the Volkswagen Passat B5 automatic air conditioner system to holistically demonstrate the structure and operation of the system. The device applies to theoretical teaching and maintenance training of the automatic air conditioner system in secondary and senior vocational skill schools, normal education and training institutions. ii.Features 1.A real and operable automatic air conditioner system is used to illustrate the structure and operation of the system. 2.The compressor is driven by a three-phase motor. A control panel can be operated to demonstrate operation and operating principle of the automatic air conditioner system. Heat generated by the water heater. A control panel can be operated to demonstrate operation and operating principle of the auto manual air conditioner system. 3.The training bench is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object. 4.The training bench is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the air conditioner system. 5.The training bench is installed with pressure gauges and thermometers, which display real-time pressure and temperature at the inlet and outlet of the air conditioner system. 6.The training bench supports practice of filling refrigerant and detecting leakage. 7.The training bench's base frame is made in steel and the surface is paint-coated. Self-retention wheels are installed to ensure that the bench is flexible, reliable and endurable. 8.Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc. iii. Basic Parameter 1.Size: 1000mm � 1000mm � 1800mm (length x width x height) 2.Driving power supply: three-phase four-wire (three-phase five-wire 380 ± 10% V 50 Hz) 3.External power supply: A.C. 220V ± 10% 50Hz 4.Operating voltage: 12V DC 5.Refrigerant: R134a 6.Operating temperature: -40? to +50? 7.High pressure gauge: 0 ? 3.5 Mpa 8.Low pressure gauge: 0 ? 1.5 Mpa 9.Three-phase asynchronous motor ? Model: YT 100L1-4 ? Voltage: A.C. 220V/380V ? Power: 2.2 KW ? Rotation speed: 1420 r/mi

Introduction: Esd simulator (electrostatic discharge generator or electrostatic gun) is in full compliance with iec 61000-4-2, en61000-4-2, iso10605, gb/t17626.2, gb/t17215.301 and gb/t17215.322. The esd generator is designed for the assessment of electrical and electronic equipment to withstand esd performance. Esd61000-2/esd61000-2a has lcd display in both english and chinese, they equipped with an infrared remote control which can allow you do the test in some special place. Specifications: Product model Esd61000-2 Esd61000-2a Output voltage 0.1~20kv±5% 0.1~30kv±5% Polarity Positive/negative Positive/negative Energy storage capacitance 150pf±10% (replaceable) 150pf±10% (replaceable) Discharge resistor 330o±5% (replaceable) 330o±5% (replaceable) Current rise time 0.6~1ns 0.6~1ns Testing functions Single, count, 20pps, air, contact, iec level Single, count, 20pps, air, contact, iec level Trigger mode Manual/auto Manual/auto Numbers of discharge 1~9999 1~9999 Repetition 0.05s~99.99s 0.05s~99.99s Working power Ac220v(option 110v)±10%, 50/60hz Ac220v(option 110v)±10%, 50/60hz Touch screen with super big lcd and built-in windows ce Calibrate report: Output voltage (kv) First peak current (a) Current at 30ns (a) Current at 60ns (a) Rise time (ns) 2 7.29 4.10 2.20 0.93 4 15.40 7.90 4.30 0.97 6 23.20 12.10 6.50 0.97 8 29.40 16.20 9.30 0.89 -2 7.39 3.50 2.30 0.92 -4 15.50 7.70 4.30 0.89 -6 23.40 11.90 6.30 0.90 -8 31.80 16.10 8.20 0.90 Note: metal holder needs extra cost.

Apm Grain Seed Elevator Buckets Elevator Details Type: Grain and Seed Elevator Use: Seed Elevating Brand Name: APM Model: DTY-10M Warranty: 2Years MOQ: 1 Set Place of Origin: Hebei, China Certification: SGS, SONCAP, CE, BV After-sales Service Provided: Engineers available Power: 380V, 50HZ, Three Phases, can be different Description Bucket elevators are mainly used to transport the granule of grain and oil, food, feed and chemistry elevation. Advantages of Grain Bucket Elevator 1. Laser cutting assures jointless structure and no grain leakage. 2. Gravity unloading guarantees the smooth operation and low broken. 3. Bucket elevator adopts a double-cylinder, which reduces extrusion and fracture, so the broken rate is extremely low. 4. Bolted connection features free welding and leak-tightness. 5. Production lot: produce 2000 machines per year, 200 machines per month. 6. The unique designed handpiece avoid hemp rope winding and material broken. Note of Bucket Elevator 1. Choose the suitable model according to the output. 2. Whether the material is easy to broken is another choose way, Z type elevator is non-broken machine. Specification of Bucket Elevator Name Model Power (kw) Capacity (kg/h) Weight (kg) Overall size L�?W�?H (mm) Remark Ultra low speed, no broken elevator DTY-10M 0.55 10000 350 1520 X 800 X3390 almost zero broken rate DTY-50M 4 30000 450 1600 X 500 X 4400 Specification of Slope Bucket Elevator Name Model Power (kw) Capacity (kg/h) Weight (kg) Overall size L�?W�?H (mm) Remark Grain Slope Elevator DTY-10X 0.75 10000 250 3640 X820X 2750 zero broken rate Pre-sales Service 1. Technical Consulting Service Our wide product range enables us to provide most flexible, efficient and reliable equipment configurations or complete solutions for customers according to different requests and budgets. Also we can design different solution for different demand. 2. Company and Production Line Visit Before placing orders, customers are warmly welcome to visit us and our facility. We can also arrange the visit to our existing customers to learn the operation condition of our machines and complete plant. In-sales Service 1. Reliable delivery time. 2. Strict quality control by in-production 100% check and test. 3. User manual and spare parts provided for free. After-sales Service 1. Fast technical guidance for construction, installation and commission. 2. Necessary training for daily maintenance on site. 3 24 months warranty 4. Long life regular technical service 5. Timely solutions to problems.