Microwave disinfection unit for medical waste Model MDU-1B
MDU-1B is an integration system including feeding, shredding, disinfection, discharging, and exhaust ducting systems.
60kg/h treatment capacity, or 600l/h, based on an average density of medical waste at 0.1kg/l ~0.15kg/l.
It can service well to some large scale or medium scale hospitals, clinics, or any other healthcare centers, Customs epidemic prevention department, etc. whose medical waste quantity would be 500kg per day (10%).
PROCESS
The infectious material is temporarily held in a waste container(s) which in turn, are emptied into an pre storage hopper via a charging system which is located at the front of the MDU, The infectious waste is fed to the shredding system by a feed arm where it is shredded. The shredded material is conveyed through a microwave section and temperature holding section, respectively for disinfection, with microwave of 2450MHz (50MHz), temperature 95, with over 45 minutes. The disinfected and unrecognizable (sharps) waste is then discharged into large waste containers (or compaction units) by the discharging screw conveyor. From there the material can be transported to a local municipal landfill for disposal or to a refuse recycling plant.
TECHNICAL CHARACTERISTICS
MDU series products are designed as an automatic operation system with minimal operator operations, with the following characteristics:
Energy saving: microwave heating is uniform, no energy loss, high energy, strong penetration into the object, instantaneous penetration into the object, good energy-saving effect, take the model with a daily processing capacity of 5T/d as an example, installed power Only 117 kilowatts.
Efficient energy: The temperature of action is low, and the heat loss is slow: If microwave and ordinary heating produce the same amount of disinfection, the temperature of the object will be significantly lower than that of ordinary heating. The waste after microwave disinfection is non-toxic, without residue, and lightly damaged.
Absolute sterilization and disinfection: Microwave can effectively sterilize all materials on all organisms with no select. It has a broad spectrum of disinfection bacteria and can kill various microorganisms and pathogens.
Spatial convenience: Microwave disinfection requires a small working environment and small area, does not cause high temperature to the surrounding environment, and is clean and hygienic.
Environmental friendly: no acid gas and dioxins and other pollutants are produced.
Microwave disinfection unit for medical waste Model MDU-3B MDU-3B is an integration system including feeding, shredding, disinfection, discharging, and exhaust dedusting systems. 180kg/h treatment capacity, or 1800l/h, based on an average density of medical waste at 0.1kg/l ~0.15kg/l. It can service well to large scale hospitals, or any other healthcare centers, whose medical waste quantity would be 1.5 tons per day (10%). Applicable range Blood and Blood Products Dialysis Waste Animal Tissues, Body Parts, and Carcasses Human Tissues, Body Parts, and Limbs Biological and Non-Hazardous Pharmaceutical Needles, Syringes, and other Sharps Research Waste Laboratory Specimens Surgery Waste Pathology and Histology Samples Aids and Hepatitis Waste Isolation Waste Cultures and Slides Intravenous Bags, Blood Bags, and Associated Tubing Animal Bedding Packaging Materials Gloves, and Gowns Associated with Waste Collection Trace Chemotherapy/anti- neo plastic waste
This equipment can handle medical waste such as medical infection, injury and pathology, and carry out harmless disposal of medical waste. Equipment integrated design, a full set of equipment low energy consumption, automatic operation, simple operation, anytime and anywhere treatment of medical waste, fixed, mobile can be customized according to demand, convenient and flexible. Microwave disinfection treatment system is an integrated equipment, the equipment at least by automatic feeding unit, shredding unit, microwave disinfection sterilization unit, steam heating system, discharging unit, , exhaust dedusting systems and alarm system.
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Supplier: Cocoa beans, coffee beans, rice, sugar olive oil, metal scrap, a4 paper, pink salt, chemicals, and medical equipment
Services: End to end trading
Buyer: Metal scrap
Supplier: Rice , coffee , agricultural products, seafood, spices, sugar, cooking oil, herbs essence oils , food, medical equipment, cosmetics, minerals, petroleum, fertilizer, animal feed, production equipment, extraction, packaging...
Buyer: Household electrical appliances , gemstone, cars