WPS3010 Adjustable DC regulated power supply station with output switch and short circuit alarm, WPS3010 30V 10A with 4-Digits LED Power Display and USB quick-charge interface is made for mobile phone power test repair which can be your best choice.
Features:
Highly Accurate Encoder Adjustment: Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs.
Output Switch Control: In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency.
Automatic Power Calculation: The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment.
Short Circuit Alarm: When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage protection, thermal protection, voltage overload, power supply overload, etc.
Packaging and After-Sales:
1 x Wanptek DC Power Supply,
1 x Output Power Cord,
1x Input Power Cord,
1 x User Manual.
Size is 7.48*3.54*5.90 inches, Weight is 2.46lb.
Note: If you have any technical questions about our power supply, please do not hesitate to contact us.
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Items with details. 1.Dual dc regulated power supply:- Product name : " power supply, digital (variable) 30-0-30 volts " Product code : " el-193" Description : Variable dual output Dual Display DC Power Supply Digital 30-0- 30V @2A Technical Specification : Output Voltage : 30-0- 30V @ 2A Output Current :0-2A Input Voltage: 110V, 60Hz. (Or 220V, 50Hz.) Constant voltage/ Constant Current Voltage and Current adjustment Power effect: CV
Remote sensing for distantly situated loads for models above 5 amps. Optional facilities : (at extra cost) Over voltage protection (fixed / variable). Input voltage: 115v ac ± 10%. Rack-mounting, wall mounting, base mounting. Ttl compatible active on / off.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 100KW Rated energy: 150KWH
Specifics: Load Regulation: 10% Operation Time: 30min(continuous) Input Voltage: 230Vac/117Vac/50-60Hz Output Voltage: 13.8VDC Output Current: 25-27A Ripple Voltage:
Specifics: Load Regulation: 10% Operation Time: 30min(continuous) Input Voltage: 230Vac/117Vac/50-60Hz Output Voltage: 13.8VDC Output Current: 3-5A Ripple Voltage:
Specifics: Load Regulation: 10% Operation Time: 30min(continuous) Input Voltage: 230Vac/117Vac/50-60Hz Output Voltage: 13.8VDC Output Current: 5-7A Ripple Voltage:
