Jc Lub Pe-72

Acts as lubricant, dispersing agent and mold releasing agent. It is effective against mill sticking. It improves extrusion properties of compounds. It reduces mold fouling and easy removal of articles from the mould. Packing Size: 25 kgs. Available Forms: Granules, Powder Technical Data Sheet Product Name : JC LUB PA - 45 Function : Processing promoter for compounds based on synthec rubber, especially FPM CO, ECO, ACM,and HNBR. Technical Name : Oleochemical Melting point : 58 + 7'C Solubility : Insoluble in water Acid Value : 8 Max Iodine Value : 1 Max Ash content : 0.3 Max Mode of action : Acts as lubricant, dispersing agent, and mold-releasing agent. It is effective against mill scking. It improves the extrusion properties of compounds. It reduces mold fouling and easy removal of articles from the mould.Mainly recommended for FPM (Fluoro elastomers) ACM and HNBR rubber, CO. ECO, EPDM, IIR (Butyl). In plastic : Recommended in Polycarbonates, thermoplastic Polyester (PPT, PET) and other engineering thermoplastics Dosage ; Typical dosage rate is 0.5 -2Phr Storage : Store in cool dry place away from moisture and sunlight The above information has been compiled from what we believe to be credible sources. To our knowledge the information is accurate and reliable, however, it is not guaranteed. It is the user's responsibility to determine the suitability of any JC EG 81 material in their application. The individual conditions of each customer are well outside of our control and we cannot be held liable for its functionality and use. As with all Chemical usage safety, precautions are highly recommended.

Proximate analysis Bleachability (on cotton seed & cannola oil) : 75% - 80% (1% dose) Bleachability (tested on soya oil): 70% - 72% (1% dose) Moisture contents : 05% - 12% Ph value (10% water suspension) : 3.50 - 4.50% Acidity: less then 0.01 % Filtration rate (at 110 c) : 3.00ml - 7.00ml per minute Oil retention : 27% - 30% Sand / crit : 08% - 12% Loose bulk density : 450 - 470 grm per ltr. Compact bulk density : 650 - 665 grm per ltr. Pass through 100 mesh : 99.00% Pass through 200 mesh : 80 - 93% 25 kgs pp bags with pe innerliner, 24-25 mt fix in one 20' fcl

Chemical name: Ditridecyl thiodipropionate CAS No.:10595-72-9 Molecular formular:C32H62O4S Molecular weight: 542.9 Appearance: Colorless or light yellow liquid Specific gravity, g/cm3: 0.931-0.941 Acid value, mgKOH/g: 0.5max. Color, ( Pt-Co): 50max. Saponificating value, mgKOH/g : 200-210 ANTIOXIDANT HONOX-DTDTDP is a liquid secondary stabilizer and antioxidant and have excellent compatibility with resin. It is used for polymers (ABS,PP,PE,and PVC) and has a good synthesize effect in combination with phenolic antioxidant.

Vinyl Chloride and Vinyl Acetate Copolymers MLC-14-55 New grade Vinyl Chloride and Vinyl Acetate Copolymers MLC-14-55:It is white powder,ester soluble with colorless,transparent solution, and it has perfect balance on film-formation ,solvent release property ,high chemical resistance ,dissoluvability,color contrast property,paint film intensity and thermoplasticity.etc.And it has lasting flexibility,abrasive resistance,low expansion rate and low water and gas permeability, therefore, it can be oil resistivity,grease resistance,dilute acid resistance,alkali resistance,salt resistance and alcohol resistance. It is the binders with physical property drying with the film formation after the solvent volatilization in the system. MLC-14-55 Vinyl Resin Quality standard (XHQB-6). No. Item Index Test method 1 Appearance White powder By visual 2 Whiteness 80 GB2913-82 3 Composition % by Wt Vinyl Chloride 86±1% GB/T7139-2002 Vinyl Acetate 14±1% ISO1159-1978 4 Reactive Functionality Type % by Wt 5 K Value 46-48 GB/T 3401-2007 6 Viscosity No. ml/g 52-56 GB/T 3401-2007 7 Glass Transition Temp About 72 GB11998-89 8 Average Molecular Wt About 27000 Calculated by the Viscosity No. 9 % by wt, through 60 mesh 100% GB/T6003.1 10 Apparent density (g/ml) 0.5. GB20022-2005 11 Volatilization (%) 1% GB/T2914-1999 12 Impurity Particle No. /100g 20 GB9348-88 13 15% resin in MEK or EA Colorless and Transparent By visual Application: MLC-14-55 new grade is used for application toy paint ,marine maintenance paint ,PVC Ink,paper coating,ethylene material base finishes,PU color flake /color paste,PU leather surface treatment adhesive etc. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. *Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. *Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date.

Product Name: Trifluoroacetic acid Product Specification:=99.5% Place of Production:Jinan Shandong CAS ?:76-05-1 EINECS ?:200-929-3 Formula:C2HF3O2 Physico-chemical Properties:colorless volatile liquid Boiling point:69 ºC~72 ºC Main Uses:Used as pharmaceutical and agrochemical intermediates,biochemical reagent,organic synthesis reagent Packaging:200L/Iron drum with PE liner