The PTO is splined with a ring that interferes. Bolt 1 3/4 Z6 Z21
The replacement Yoke is for Landpride that's one-third 20 x 20 spline interference bolt-type of Series 6 PTO yoke that can be used with it with the 30.2mm wide x 92.5mm Series 6 Cross kit.
This yoke is usually found on the divider box side on the PTO shaft on a variety of Landpride mowers.
We have a wide range of spare parts for rotary cutters. If you can't find the components you need to order, Please contact us, we would like to get your business. We add new items often, so be sure to check our store frequently.
We have a variety of spare items used in Agricultural Equipment please contact us for any inquiries or if you require more details.
the PTO Splined Yoke
The Series 6 interfering Bolt Type PTO Yoke
Accepts 30.2mm X 92mm Series 6 Cross Kit
Interfering Bolt Included
Material:Steel 45, 40Cr,20CrMnTi etc.
Process:Forged
Surface: Heating treatment and prevention of rust
Color: Yellow, Black, or as your needs
Spline PTO Yoke Spline PTO Yoke fits the following items
The RC5010 Driveline Conv. 540 RPM
(826-188C) EC New Shields & Old Shields
(826-181C) EC New Shields & Old Shields
The RC5015 Driveline Conv. 540 RPM
(826-188C) EC New Shields & Old Shields
(826-181C) EC New Shields & Old Shields
RCM5010 Driveline Conv. 1000 RPM
(826-189C) EC New Shields & Old Shields
(826-182C) EC New Shields & Old Shields
RCM5015 Driveline Conv. 1000 RPM
(826-189C) EC New Shields & Old Shields
(826-182C) EC New Shields & Old Shields
Supplier: Pto shafts yokes , combine knifes
The 35 Series Yoke & Tube Assembly is an extremely durable PTO shaft yoke built to last. This PTO Yoke has an 1-2/9 inch. square bore that makes it easy to connect. The length of the shaft is Centerline (Center of Ear hole to rear of the tube) 34-2/3 inches. Tube Outer Diameter 1-9 in. Tube Inner Diameter 2-9 inches. square The PTO drive shaft yoke runs at 108 kilowatts/81 HP at 1000RPM or 70 HP/52 Kilowatts @ 540 RPM for maximum efficiency. Weight of PTO's yoke: 12.06 lb. How Does Tractor PTO Shaft Work? The PTO shaft is the one that transfers the power of your tractor onto the machine you prefer. This PTO driveline is the place that everything else that requires power from a tractor gets its energy from. PTO drivelines can be ignored during routine maintenance checks because they are so important when operating farm equipment. What are the components of the PTO Tractor Shaft Drive Shaft? 1. The tractor yoke PTO assembly begins with this kind of yoke. It is attached to the tractor and is used to connect to the power train. There are two primary kinds of tractor yokes. One type includes a spring lock which utilizes a spring-loaded neck to join and unhook the yoke. The second is a quick-to disconnect, which connects using a pushpin. The tractor yoke could be identified as a six-spline, 20-spline or 21-spline to indicate the way it connects to the connector to the tractor. It is identified by counting the notches in the collar of the yoke. 2. Kit for Bearing and Cross- This u-joint is used to connect the yokes within the PTO assembly. Its cross-bearing kit could contain a snap ring within the bushing internally or externally. This means that it is located in the ear that connect the yoke. 3. Shaft Yoke - A cross and bearing kit joins the tractor yoke and the shaft of driveline. 4. Shaft - The shaft is the rod made of steel that is located at the heart of the driveline that provides its length as well as connecting the yoke to the attachments. 5. Tube-The shaft goes through this cylinder of steel, adding an extra layer of protection to the driveline 6. Tube Yoke- Connected to the tube's tip it connects the driveline and the device by using a cross that is connected to a bearing kit. 7. Implement YokeThe Implement Yoke links the driveline and the device or machine which is operated by the tractor. 8. Guard- A tough plastic covering is positioned around the driveline to protect it from the driveline from being damaged during operation.
Replacement for Weasler 55 Series PTO Shaft 1/8''-6 7 Requires Cross Kit. Implementation Yoke is required. The engine produces 106 horsepower at 540 RPM. 48' Compressed Length (Dim. A) 55 Series Replacement PTO Shaft Weasler specifications: Spec. Imperial Metric Bore 1 Minus End Yoke Bore 2 Minus End Yoke Compressed (Closed) Length 37.38 inches 949 millimeters Compressed Overall Length 48.00 inches 1219 mm Connection 1 YOKE Arms Connection 2 ARMS WITH YOKE Extended Length 61.13 inches 1553 mm Extended Overall Length 72.00 inches 1829 mm HP@1000RPM 164 HP 122 Kilowatts HP@540RPM HP 106 79 Kilowatts Length 48.00 inches 1219 mm Outside Diameter 7.28 inches 185 millimeters Shipping Dimensions 37.38" L 37.38" L 7.28" H 7.28" W x 7.28" W 95cm L x 18cm H 18cm W Shipping Volume 1981.08 in3 32464 cm3 Shipping Weight 41.90 pounds 19 kilograms Weight 41.90 pounds 19 kilograms Replacing of 55 Series Weasler PTO Shaft Parts: Tractor Yoke The Cross & Bearing Kit Shaft Shaft Weld Yoke Slip Sleeve Tube Tube The Weld Yoke implement Yoke Yoke & Shaft Assembly Yoke & Tube Assembly Drivelines Guard & Guard Bearing What is a PTO shaft? PTO shaft plays an essential function as it transmits power between the tractor and the implement attached. The components of the PTO shaft comprise the inner and outer PTO yokes as well as universal joints, safety chains, and guards. There are many different kinds of PTO shafts that you can choose from and it is crucial to select the best one for your particular equipment and use. HZPT provides three distinct kinds of shafts for PTO: North American, German and Italian. Each type comes with multiple choices of series, which include different bearing diameters, overall cover-to cover lengths, as well as snap rings. The most precise method to determine which series is the right one is to determine the outer diameter of the cap and the U-joint, from one side that the cap to one side. The location where the snap rings are located is a further crucial factor. PTO Shaft Components: 1. PTO Shaft Outer Yoke 3. PTO Shaft Inner Yoke 5. Plastic PTO Shaft Guard 2. PTO Shaft Universal Joints 4. PTO Shaft Guard Chains 6. PTO Shaft Tube How do I measure PTO Shaft Parts? Properly measuring shafts is essential to choose the right PTO size. Each part must be measured in a certain manner to be able to fit into the standard dimension. Follow these steps to make sure you have the right measurements and to get the correct pieces for your tractor.
An Four Series PTO (Power Take-Off) shaft is a form of power transmission device made of metal which is used to transfer energy from an engine or any other power source to an equipment like a baler or mower. The term "4 series" signifies the dimensions as well as the specifications for the PTO shaft which are designed to handle a specific amount of torque and power. The PTO shaft of the 4 Series is splined in a standard size and pattern that lets it be easily detached to the tractor or. It usually consists from a rotating shaft that has an splined ending that connects onto the tractor's PTO output shaft, and an attachment yoke or another mechanism at the other end that connects with the implement. This PTO shaft was designed to support up or 80 horsepower based on the particular type and design. It is essential to choose the correct size and kind of PTO shaft to suit the equipment you are using, as an unsuitable or oversized shaft can cause damage to your equipment or even death or serious injury for the user. #4 Series PTO Shaft Parts The 4 Series PTO (Power Take-Off) shaft is typically made up of a number of components, including: 1. PTO Shaft PTO Shaft: The primary rotating shaft that transmits energy from the tractor into the. The shaft is typically composed of steel, and it has a an splined end which is attached onto the tractor's PTO output shaft. 2. Yoke: Yoke: PTO shaft yoke, or any other attachment mechanism is utilized for connecting an PTO shaft and the. The yoke might include a spline or another connector that is matched to the shaft of the implement's input. 3. Safety Shield Safety Shield: A PTO shaft guard or safety shield is used to protect the PTO shaft to protect pets and humans from being in close contact with rotating shaft. This PTO shaft security shields are typically composed of plastic or metal and could be hinged or sliding design to allow an easy accessibility to the PTO shaft. 4. Bearing Bearing PTO shaft bearing utilized to help support the PTO shaft and decrease friction when it turns. The bearing could be situated in the tractor itself or in the machine, based on the particular design. 5. Locking Collar Locking Collar PTO shaft-locking collar or another device is employed to lock PTO shafts PTO shaft with the tractor's PTO output shaft. The locking collar can be spring loaded or require a different tool for engaging and disengaging. 6. Universal Joint Universal Joint PTO universal joint for shafts or U-joint can be used for power transfer between both the PTO shaft, and implement. This PTO shaft U-joint can allow for slight disalignment between two shafts, and assists in reducing wear and vibration. 7. Clutch: Several PTO shafts could have an automatic clutch mechanism that permits operators to engage or disengage from the PTO with no interruption to the tractor's motor. This PTO shaft clutch could be either automatic or manual according to the specific model.
PTO Shaft Replacement for Weasler 2000/14 Series Specifications for 14 Series PTO shafts Bore 1 1.37 inches 35 millimeters Bore 1 1 3/8-6 SPLINE Bore 2 Minus End Yoke Compressed (Closed) Length 51.75 inches 1314 mm Compressed Overall Length 60.00 inches 1524 mm Connection 1 SPRING-LOK Connection 2 YOKE Arms Extended Length 90.75 inches 2305 mm Extended Overall Length 99.00 inches 2515 mm HP@1000RPM 48 HP 36 Kilowatts HP@540RPM 28 HP 21 Kilowatts Length 60.00 inches 1524 mm Outside Diameter 7.31 inches 186 millimeters Dimensions of Shipping 56.06" L 7.31" H 7.31" W x 7.31" W 19cm H x 142cm L x 19cm W Shipping Volume 2995.63 in3 49090 cm3 Shipping Weight 33.82 pounds 15 kilograms Weight 33.82 pounds 15 kilograms This 14-series PTO Shaft is a reliable product with its durable construction. This PTO drive shaft's yoke is constructed with one inch. 1-1/8. Solid rectangle bore for easy use. It is part of the 14 Series. this PTO shaft and yoke have been made to meet your requirements. This PTO tractor yoke can run at up to 58HP for maximum efficiency. NA 14 Series PTO Jocket, shaft and yoke to meet your requirements The Centerline from the End of Shaft: 35-2/3 in. The PTO shaft drive yoke is 1 in. 1-1/8 inch. Solid rectangle bore to allow for ease of operation PTO tractor yoke runs at 58 HP/43 Kilowatts @ 1000RPM or 38 HP/28 Kilowatts @ 540RPM to maximize efficiency. Weight: 12.7 lb/6 kilograms Extension size: 25-5/8 in. PTO Shaft Parts #14 2000 Parts PTO Series Driveline Parts Part Number Cup Diameter Length (B) Snap Ring Series Type 33Hp@540rpm 62Hp@1000rpm 1-2075 1.125 2.625 outside 14 #14 /2000 series Square and Rectangular parts Bar Yoke # Solid Shaft OD Spec Square Sleeve Tube Yoke Shield Shield Bearing Length Shield Bearing ID 69-1248 56-2000 48 2.050 900-2548 921-1200 48 2.050 #14 2001 Series Splined Parts Bar Yoke # Solid Shaft OD Spec Square Sleeve Tube Yoke Shield Shield Bearing Length Shield Bearing ID 69-1248 56-2000 48 2.050 900-2548 921-1200 48 2.050 #14/2000 Series Quick-Connect Yokes Part Number Diameter No of Splines C-E Length 100-1421 1.375 21 100-1406 1.375 6 14 Hex QDs of the 2000 Series 102-1418 1.125 #14 /2000 series Clamp Yokes 14/2000 Splined Clamp Yokes Part Number Diameter No of Splines Notes 14031-1103 1.00 15 Splined 14 / 2000 Round Clamp Yokes Part Number Diameter Keyway Notes 14021-2088 1.000 .250" round 14021-1111 1.188" .188" round 14021-1387 1.250" .250" round 14 2000 Hex Clamp Yokes #14 / 2000 Series Straight Bores 14 /2000 Series Round Bores Part Number Bore Key (c-e) Length 800-1416 1.00 .250 3.875 800-1417 1.062 .250 3.875 800-1418 1.125 .250 / .312 3.875 800-1419 1.188 .250 / .312 3.875 800-1420 1.250 .250 / .312 3.875 800-1422 1.375 .312 3.875 800-1424 1.500 .375 3.875 14 2000 Series Splined Bores Part Number Diameter Splines 801-1418 1.125 6 801-1420 1.250 6 801-1406 1.375 6 801-1421 1.375 21 14 /2000 Series Hex Bores
PTO Shaft to New Holland BigBaler Square Balers 335 360 New Holland Bigbaler models for Square Balers 335, 340 Our research has shown that the majority of tractor designs employ 1.375-21 Splines. The input shaft has 1.750-6 Splines. Other combinations are also available. PTO Shaft Assembly PTO Catagory / Tractor Part Number CAT5/540 1.375-6 CS8R121U2WR7000 CAT5/1000 1.375-21 CS8R121U2WR8000 CAT5/1000 1.375-20 CH8R121U2WR0000 PTO Shaft Yokes Part Number Diameter No of Splines Bore c-e Length Notes 5090L0360 1.375 6 68 133 Splined 5090L3760 1.375 21 68 133 Splined 5090L0460 1.750 6 68 133 Splined 5090L3860 1.750 20 68 133 Splined The PTO Shaft is what it's called. A PTO shaft transmits power of an engine to an PTO shaft driven attachment. This allows the tractor to run a range of tractor equipments, such as flail mowers, wooden chippers excavators, rotary tillers and many more. PTO shaft connections on tractor aren't standard, and can lead to issues with joining with the PTO shaft. For instance, some older models have the connection flange located closer to the tractor making it difficult to connect, creating a danger to safety.
A PTO shaft is a device that transfers the power of your tractor into attachments powered by a PTO-driven attachment. This allows the tractor to provide power to a variety of tractor-powered equipment, including flail mowers and wood chippers excavators, rotary tillers, and much more. Length 1010mm from Cross Joint to Cross Joint End 1 1 3/4" 6-Spline Yoke End 2 1 3/4" 6. Spline F5 Freewheel Tubing: 1b / 2a Guard: SD25 Specifications of the W 2400 Series PTO Shaft 150-250cm Cross to the Cross Length The length range is 165 to 260cm overall. W2400 Series. 32mm x 76mm x 86mm (approx.) Triangle Profile Triangular Profile Drive Tube. 39KW-53HP @ 540 rpm, 61KW-83HP @ 1000 rpm. Standard Shaft Includes: 1 3/8" 6 Splines release Yokes on One End. NO End Yoke at the Other Side. Security Guard. I'll take an un-standard yoke. Weight W kg 15.1 Inner diameter, d mm 32 Outside diameter D mm 170 The number of splines, F 21 Length L mm 610 Inner diameter, d1 mm 35 Slots, number of slots Quantity of slots, F 21 Length 2 Length 2 mm 860 W 2400 Series PTO Shaft Applications Parts for spares to support the combined drives comprising Massey Ferguson, Claas, and Gleaner. The W2400 series PTO shafts are designed to work with these machines used in agriculture: Combine harvester Challenger: 660 670 Combine harvester Claas: LEXION Combine harvester Gleaner: C62 R40-R75 Combine harvester Massey Ferguson: 8780 9690 9790 Tractor Massey Ferguson: 8680 Make sure that the torque of the drive is transferred to the elements that drive the machine for replacement of damaged or worn out components during restoration and repair work. A product that consists from a beam central to the beam as well as two forks that pivotally connect to each end of the beam. This connects the shafts to allow the transmission of torque between shafts having significant shaft rotational shifts (up to 40-40 deg) which change with their rotation. PTO Shaft Parts and Components The HZPT's PTO shafts and parts ensure that your equipment is running. We are a top manufacturer of PTO shafts, we have various standard, metric, and constant velocity drivetrains and PTO shaft components as well as assemblies (implement PTO shaft yokes, PTO shaft clutch as well as PTO shaft tubing). HZPT has a wide selection of tractor PTO shaft drivetrains. We provide drop-in drivetrains and other components for replacement which offer an easy option for customizing or fixing your application.
HZPT concentrates on the development and production for agricultural equipment PTO shafts as well as their associated products. We can offer the full range of support and development solutions for development, R & D, testing production, opening of molds casting, forging, and mold opening of brand new agriculture PTO shafts. If you are thinking of manufacturing new equipment for agriculture, such as PTO shafts, do not hesitate to get in touch with us. Tractor PTO Shaft Types 1. PTO shafts can be split into front type, rear type and side type in accordance with the different positions of installation on the tractor. A rear mounted PTO shaft is located at an angle to the front of the tractor. It is the most commonly used form utilized on tractors. A front mounted PTO shaft is located on forward of the tractor. It is typically mounted on high-horsepower machines that has its front PTO shaft. It is mostly employed to perform joint operations. The tractor is positioned both in the rear and front simultaneously it can perform many tasks simultaneously and dramatically increase the efficiency of fieldwork. Side mounted PTO shafts are situated on the sides of the tractor. They are typically used on smaller horsepower tractors. How Do the PTO Shafts Work? The majority of agricultural equipment models do not have independent power, and this is the reason the PTO shafts step into the picture to boost the efficiency. Since the components have PTO shaft yokes and connectors on both ends to connect your equipment and machinery and implements, it is possible to connect all the parts and have the entire unit function properly. The PTO shafts operate using simple switches. Therefore, they be rotated between 540 and 1,000 RPM, depending on the equipment attached. In operation when it is in use, when in use, PTO shaft will draw the power and torque of the machine's transmission to supply enough energy and power to the device that it is connected to which will result in a flawless performance. Also, as we've said, if you attach the device to a high-torque vehicle, and the components aren't in the correct dimension and form the vehicle and implement will be damaged. the vehicle and the equipment. Therefore, when measuring PTO shafts, make sure you make use of a tape measure and take measurements on the other side of each yoke in order to find the length closed.
The PTO shaft 2 Series is one of the types of power transmission devices that transfers energy from an agricultural tractor or another source to an engineered implement or attachment. It's an upgrade of the 1 Series PTO shaft, made for applications where greater power and torque are needed. It is the 2 Series PTO shaft comes with an increased diameter and higher torque capacity when compared to its predecessor, the 1 Series PTO shaft. This makes it ideal for industrial and heavy-duty agricultural applications. Similar to the 1 Series PTO shaft, the 2 Series PTO shaft also includes six primary components: the tractor end yoke and universal connection, the intermediate tube safety shield, the spline yoke, and the yoke at the end of the implement. The components are paired to create a stable powerful power transmission. This shaft was made with a larger torque capacity, which makes it suited for uses such as large-scale tilling cultivation heavy-duty, and other tasks that are highly demanded. It's also compatible with a wide range of attachments and implements which includes those that are designed specifically to work with us with the 1 Series PTO shaft. This versatility makes it a preferred choice for people who own many different pieces of equipment to run. Overall The 2-Series PTO shaft offers an efficient and reliable power transfer system for industrial and agricultural applications that are heavy-duty. It's built to handle the demands of power applications with the goal of ensuring operator safety and comfort to users. #2 Series PTO Shaft Parts There are a few main components that make up the 2 Series PTO shaft: Tractor Yoke: This joins the PTO shaft onto the tractor's PTO output shaft, which supplies the power for the rest part of the PTO shaft assembly. Universal Joint - This component connects the yoke at the end of the tractor with the tube that is intermediate permitting the transfer of power to an attachment or implement and allowing some movement flexibility. Intermediate Tube Intermediate Tube - This is a hollow tube made of metal that connects the universal joint and the splined yoke, giving stability and support in the PTO shaft in its entirety. Spline Yoke â?? This can be attached to an attachment or implement and has a set of splines that connect with the female shaft that is connected to the attachment or implement to allow an exchange of energy. Safety Shield Safety Shield - A cover made of metal that covers the rotating PTO shaft assembly, which prevents accidents due to entanglement by protecting the driveline. Implement End Yoke This piece connects to the splined yoke and transmits power to the attachment or implement.