Ha Mold 22

HDPE Repro Blue Pellets Blow Molding/Extrusion Grade MATERIAL : HDPE repro pellets blow molding/extrusion grade, blue color CATEGORY : HDPE TYPE : repro pellets GRADE : blow molding/extrusion grade, blue color SPECIFICATION : Packed in big bags, 600-700 kg/bag, max load in 40'HC container: 25 mtons ORIGIN : Korea LOADING WEIGHT : 20-22 Tons FOB (USD/Ton) 1100-1400

PP Repro Pellets Black For Sales MATERIAL PP repro pellets homo PP,injection molding, black color CATEGORY PP TYPE Repro pellets GRADE Homo PP,injection molding, black color SPECIFICATION Packed in big bags, 600-700 kg/bag, max load in 40'HC container Origin Korea LOADING WEIGHT 22 Tons FOB (USD/Ton) 600-850

HDPE Repro Pellets Natural For Sales MATERIAL : HDPE repro pellets blow molding/extrusion grade, natural CATEGORY : HDPE TYPE : repro pellets GRADE : blow molding/extrusion grade, natural SPECIFICATION : Packed in big bags, 600-700 kg/bag, max load in 40'HC container: 25 mtons ORIGIN : Korea LOADING WEIGHT : 22 Tons FOB (USD/Ton): 1100-1300

2Lians Recycling PTE. LTD can provide below PET product: Pet Sheet Regrind Clear Scrap For Recycling MATERIAL: Pet Sheet Regrind Clear CATEGORY: Pet TYPE: Flake GRADE: A SPECIFICATION: Reground from cut loss, defective molding of unused sheets for IC trays and food trays. Labels and impurity are not mixed Origin: Japan LOADING WEIGHT: 22 Tons FAS (USD/Ton): 600-750

Pet Sheet Regrind Clear Plastic Scrap MATERIAL: Pet Sheet Regrind Clear A & B CATEGORY: Pet TYPE: Flake GRADE: A & B SPECIFICATION: Reground from cut loss, defective molding of unused sheets for IC trays and food trays. Labels and impurity are not mixed. A 60%, B 40% ORIGIN: Japan LOADING WEIGHT: 22 Tons FOB (USD/Ton): 650-750

Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.

Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.

Pet is an opalescent or light yellow highly crystalline polymer with smooth and glossy surface. It has good creep resistance, fatigue resistance, wear resistance and dimensional stability, small wear and high hardness. It has the largest toughness in thermoplastic plastics: good electrical insulation performance, little influence by temperature, but poor corona resistance. It is non-toxic, weather resistant, chemical resistant, stable, low water absorption, weak acid and organic solvent resistance, but not resistant to hot water immersion and alkali. PET resin has high glass transition temperature, slow crystallization rate, long molding cycle, large molding shrinkage, poor dimensional stability, brittle molding and low heat resistance.

Material: PC Water Bottle Regrind Quantity: 200 MT -40 MT Per Month Origin: Thailand Melt Flow Index (300?C / 1.2 kg) : 6 g/10min Blow Molding: Injection-Blow and Stretch-Blow processes Packing:1150 kgs Big bags on pallets or 35-40 kgs woven bags without pallets. Colour: Mixed Loading: 22-25 MT into one 40 ft container with bigbags Quality: No contamination with other polymers ,paper and glue. Size of Regrinds: 10-12 mm