Adlema BT4000 Series Leak Testing Devices use the pressure decay method with its precision that catches even the smallest leaks. It manages conveyor systems thanks to its internal PLC module, 8 externally usable inlets and 8 outlets, EtherCAT protocol and remote I/O modules. Adlema BT4000 Series Leak Testing Devices are suitable for production lines with a wide measuring range of -1, +40 Bar.
BT4000 series Advanced Level Leak Testing Devices can catch even very low-pressure differences by following the order of 0.1 Pa, thanks to the differential measurement method. It is suitable for automation and can manage the system it is included in. The advanced sealing test devices produced by Adlema offer reporting features. Test reports created in the desired format can be monitored remotely using IoT, transferred to a computer with a USB memory stick, and analyzed in Excel format.
Supplier: Pogo pin, test probe, test pin, semiconductor test probe, in circuit test probe, switch probe, interface probe, battery contact probe, big current probe, harness probe, radio frequency probe
Principles of ultrasonic Pulmonary Function Testing device The ultrasonic time difference method uses a pair of ultrasonic transducers to alternately (or simultaneously) transmit and receive ultrasonic waves. By observing the difference in the propagation time between the upstream and the backward flow of the ultrasonic in the medium (gas or liquid), the fluid velocity is measured indirectly, and then calculate the flow data based on fluid velocity. The flow measurement based on the ultrasonic principle is only influenced by the flow and geometry, and accuracy will not be affected by temperature, gas composition, humidity or pressure. So it is a perfect alternative to differential pressure and turbine principles, and is the best choice for Pulmonary Function Testing device.
Supplier: Hydraulic Testing Equipment And Engineering Equipment For Soil, Universal, Concrete, Rubber, Steel, Bitumen, Compression Testing, Etc
Test Fixture(JIG): 1. Lifetime JIG 2. TOF JIG 3. LOW Temperature Control JIG 4. OPD JIG 5. IVL JIG 6. T-EL JIG Applications Fixing device of Light-emitting / light-receiving element and semiconductors Specification : - Select the size according to the sample size and intended use. - Electrical Contact: Spring Pins - Apply On / Off and polarity reversal switches. Characteristic: - Sample customized design and production - Produce a sealed or external gas injection type according to the application. - Support 2, 4-terminal measurement and apply various input/output connectors - Can combine with various measuring equipment and light sources
Safety Glass Impact Test Device - Headform Impact Test Device Related Standard: ISO 3537 Road vehicles â??Safety glazing materials â?? Mechanical tests â?? Clause 10 Head-form test Principle: Assessment of the minimum strength and cohesion of the safety glazing material under impact from a blunt, bulky object. If required, tests can be performed on whole windscreens. Application: The purpose of this test is to verify the compliance of glazing with the asking relating to the limitation of injury in the event of impact of the head against the windscreen, laminated glass and glazing of glass-plastic and rigid plastic other than windscreens, together with The double-glazed units used in the side windows. Technical Data: Head-form Weight: 10kg Head-form Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mmw Felt hat: 90g/89mm Thickness:5mm Frame size: 1376mm*670mm*320mm Apparatus: Head-form weight, with a spherical or semi-spherical head made of laminated hard wood covered with replaceable felt and without a cross-beam made of wood. Between the spherical part and the cross-beam, there is a neck-shaped intermediate piece and on the other side of the cross-beam, a mouning rod. The total mass of the apparatus shall be 10 kg�±0.2 kg Supporting fixture: for testing flat test piece, the fixture is composed of two steel frames, with machined edges, 50mm wide, fitting one over the other and faced with rubber gaskets 3mm�±0,5mm thick and 15mm�±1mm wide, of hardness 70 IRHD. The upper frame is pressed against the lower frame by at least eight bolts. The support shall rest on a rigid stand with a sheet of rubber, of hardness 70 IRHD and 3mm±0,5mm thick, placed in between.
Supplier: Environmental Chamber, Face Mask Testing Instruments, Packaging Testing Instruments, Pipe Testing Instruments, Colour Testing Instruments, Industrial Chillers, Plastic And Rubber Testing Instruments, Universal Testing Machines, Bench Top Hardness Tester, Portable Hardness Tester, Video Measuring System, Profile Projector, Metallographic Equipment, Industrial Machineries, Plastic Recycling Systems, Spout Insert And Sealing Machine, Cooling And Heating Systems
Supplier: Nuvoscan Under Vehicle Scanning System, Kritiscan X Ray Baggage Scanner, Automated Number Plate Recognition, Red Light Violation Detection, Speed Violation Detection, Trace Detector And Covid 19 Solutions
IVL Characteristic Test System (CTS-101): Available to compose the Multi-Channel Measurement Automated Facilities Mainly-applicable components SMU : Keithley 2400, 2450, 2601, 2635B Spectroradiometer : (Konica Minolta) CS-2000(A), (TOPCON) SR-3AR, SR-UL2, (Photo Research) PR-650, PR-670 Applications Evaluation of the electrical/optical properties (I-V-L) of light-emitting devices or materials Key components Keithley 2450 or 2635B Luminance meter (Konica Minolta CS-2000(A), Topcon SR-3AR(UL2), Photo research PR series, etc.), Measurement / viewer software, facility operation PC Multi-channel / automation equipment (option)
Overview Frequency conversion series resonance test device is designed and manufactured for alternating-current withstand voltage test of Possessing a wider application scope, it is the ideal withstand voltage equipment for prefecture-level, municipal-level and county-level high-voltage test departements as well as power installation and repair & testing engineering units. Frequency Conversion Series Resonance Test Device Technical index Rated voltage Quality factor under full load in test of fire power generator Q 10 relating to load Quality factor under full load in cable test Q 30 relating to load Quality factor under full load in test of main transformer: Q 30 relating to load GIS, the quality factor under full load in switch test and other tests Q 50 relating to load Input power supply single phase of 380V Frequency adjustment range 20Hz 300Hz Accuracy of system measurement 1.5 The unit possesses protective functions, such as over voltage, over current and zero start. Description for main configuration and technical data of equipment One set of variable-frequency power supply Rated power 10kVA; Input voltage single phrase of 220V or three phase of 380V 10 and 45 65Hz Output voltage 0 400V adjustable Output voltage frequency 30 300Hz 0.1Hz adjustable stepping Instability degree of frequency 0.02 Output current: 0 25A
