UIY Inc. Power Divider Splitter Custom Design available:
Operating Frequency 87MHz to 40GHz.
Configuration: 2/3/4/8/16 ways
Connector Type optional SMA, N, BNC and 2.92mm with female, jack, male, male to female and plug genders.
Power offered 10 Watts, 25 Watts, 30 Watts, 40 Watts, 50watts.
Basic Information Place of Origin: China Brand Name: OEM Minimum Order Quantity: 1sets Packaging Details: Standard Packing for Bee Venom Collector: grid carton: 60*51*8cm/2kg controller carton: 28*22*16cm/1.5kg Delivery Time: 5 workding days Payment Terms: L/C, T/T, Western Union, MoneyGram Supply Ability: 1000 Set/Sets per Month Bee Venom Collector Product Description Two-way Output Controller Bee Venom Collector Product Description Bee Venom Collector Two-way output acquisition controller Two power grids Specification: 1. The bee venom collecting time:1-60minutes. 2. bee venom collecting Interval time:1-60seconds 3. LED cooperation screen. 4. Output Voltage:6-36v 5. Hertz:100-150HZ 6. Charger:4000mah Lithium battery
The compliant lotion, building materials, electric power metallurgy, oil field chemical engineering, leather, paint coating and spinning prints to dye, the day turn, the antisepsis of cosmetics, deckle, the water transaction etc. realm. Performance characteristics 1. As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small. 2. Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion. 3. Miscible with water; can be added in any production step; easy to use. 4. It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely. Usage and Cautions 1. In water treatment applications, dilute it into a 1.5% aqueous solution first. Add the solution at a quantity of 80 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae. 2. Avoid direct eyes' contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed. 3. Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition. 4. Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product.
READY STOCK FOR SALE USED COAL POWER PLANT (BOILER +IP , TURBINE +ALTENATOR +COOLING CAPACITY 6 MW , 7,5MW , 15MW , 30MW , 45MW , 60MW , 120MW FREQ. 50Hz /60Hz
4 MW hfo power plant in running condtion for 1 million dollar.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
China is the most successful country in the world for developing small hydraulic power stations. Our manufacturer is the manufacturing base of the United Nations Small Hydro Power Center (UNISHPC). The first Double- Directional Tubular Bulb Tide Turbine Generating Unit in China was made in our manufacturer. 4 types of hydraulic turbines are available, such as Kaplan, Tubular, Francis and Pelton in more than 200 categories and sizes. Head: 1. 5 - 1000 m Discharge: 0.07 -1 50 cumecs Power: 0. 05 - 100 mw Credential: ISO9001: 2000 Export: More than 30 countries and regions in the world including U. S. A, Canada, Japan, Iran, Turkey, India, etc.
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand. Technical Parameter for 100kw downdraft biomass gasifier gasification power plant 1. Power Plant Scale: 100kw 2. Engine & Generator Type: gas engine and generator using 100% biomass gas as fuel 3. Rotary speed of engine: 1000Rpm 4. Gasifier Type: Fixed bed downdraft biomass gasifier 5. Gasifier Gas Output: 375Nm3/hr 6. Gasification Agent: Air 7. Gasifier Outlet Gas Temperature: 700-800 degree 8. Gas temperature after Cooling: Below 45 degree 9. Biomass Fuel Consumption: 200-220KG/Hr 10. Biomass gas heat value: Normally 3000-6000KJ/Nm3 11. Application: for power generation or for thermal application 12. Site area requirement: about 50 square meters. The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.
